UGREEN Nexode 240W USB-C to USB-C Cable with TFT Smart Display (Model L541) User Manual

Introduction

This manual provides instructions for the UGREEN Nexode 240W USB-C to USB-C Cable with TFT Smart Display. This cable supports Power Delivery 3.1 for ultra-fast charging up to 240W and features a real-time display for monitoring charging status. It also supports USB 2.0 data transfer at 480Mbps.

Please read this manual carefully before using the product to ensure proper operation and to maximize its lifespan.

Image: UGREEN Nexode 240W USB-C to USB-C Cable with TFT Smart Display connected to a laptop and tablet, showcasing its use.

1. Setup

To begin using your UGREEN Nexode 240W USB-C to USB-C Cable, follow these simple steps:

1. Connect to Power Source: Insert one end of the USB-C cable into a compatible USB-C power adapter or port on a power source (e.g., wall charger, power bank, laptop). Ensure the power source supports the desired charging wattage (up to 240W for optimal performance).
2. Connect to Device: Insert the other end of the USB-C cable into the USB-C port of your device (e.g., laptop, smartphone, tablet, gaming console).
3. Verify Connection: Once connected, the TFT Smart Display on the cable's connector will activate, showing real-time charging information.

Image: The UGREEN Nexode 240W USB-C cable connected to a laptop and a smartphone, demonstrating a typical charging setup.

2. Operating Instructions

2.1 Smart Display Functionality

The integrated TFT Smart Display provides real-time information about the charging process:

• Voltage (V): Displays the current voltage being delivered.
• Current (A): Displays the current amperage being delivered.
• Power (W): Displays the total power (watts) being delivered to your device.

Image: Visual representation of the smart display's various modes, including boot animation, real-time readings, and orientation options.

2.2 Display Controls

The display can be controlled with a single touch-sensitive button located on the connector:

• Tap to Rotate: A light tap on the button will rotate the display orientation between landscape and portrait modes, adapting to how the cable is plugged in.
• Long Press to Toggle: Press and hold the button for approximately 2 seconds to turn the display off. Repeat the long press to turn the display back on. This feature is useful for avoiding light disturbance in dark environments.

Image: Detailed instructions on using the single button for display rotation and power toggle.

2.3 Charging Status Indicators

The cable features a color-coded ring around the display to indicate the charging status at a glance:

• Green: Indicates Trickle Charge or Full Charge (typically below 18W).
• Blue-Green: Indicates Standard Charge (typically between 18W and 60W).
• Orange-Red: Indicates Fast Charge (typically above 60W).

Image: Illustration of the color ring indicators and their corresponding charging speeds.

2.4 Data Transfer

This cable supports USB 2.0 data transfer speeds up to 480Mbps. This is suitable for syncing photos, documents, and other files between compatible devices.

Note: This cable does NOT support video output or monitor extension functionality.

Image: Visual explanation of the cable's data transfer capabilities and limitations regarding video output.

3. Maintenance

Proper care and maintenance will extend the life of your UGREEN Nexode cable:

• Keep Connectors Clean: Periodically inspect and gently clean the USB-C connectors to ensure optimal contact and prevent debris buildup. Use a dry, soft cloth.
• Avoid Sharp Bends: Do not bend the cable sharply, especially near the connectors, as this can damage the internal wires and outer braiding.
• Store Properly: When not in use, coil the cable loosely and secure it with the included cable ties. Avoid tangling or knotting.
• Protect from Extremes: Avoid exposing the cable to extreme temperatures, direct sunlight, or moisture.

4. Troubleshooting

4.1 Display Not Working

• Check Connection: Ensure both ends of the cable are securely plugged into the power source and the device.
• Wake Display: If the display is off, perform a long press (approx. 2 seconds) on the touch button to turn it on.
• Power Source: Confirm that the power source is active and providing power.

4.2 Slow Charging or No Charging

• Verify Power Adapter: Ensure your power adapter supports the required wattage for your device. A lower wattage adapter will result in slower charging.
• Device Compatibility: Confirm your device supports USB Power Delivery (PD) and the wattage being supplied.
• Cable Connection: Re-seat both ends of the cable to ensure a firm connection.
• Try Another Port/Adapter: Test with a different USB-C port on your device or a different power adapter if available.

4.3 No Data Transfer

• Check Device Settings: Ensure your device is configured to allow data transfer over USB.
• Re-connect Cable: Disconnect and reconnect the cable to both devices.
• Confirm Compatibility: Verify that both devices support USB 2.0 data transfer.
• Note: This cable does not support video output. If you are attempting video output, this is not a malfunction of the cable.

5. Specifications

Image: Overview of the wide range of devices compatible with the UGREEN Nexode 240W USB-C cable.

6. Warranty Information

UGREEN products are designed and manufactured to the highest quality standards. This product is covered by a manufacturer's warranty. For specific details regarding the warranty period and terms, please refer to the warranty card included with your purchase or visit the official UGREEN website.

7. Customer Support

If you encounter any issues or have questions regarding your UGREEN Nexode 240W USB-C to USB-C Cable, please contact UGREEN customer support. You can find contact information on the official UGREEN website or through the retailer where you purchased the product.