J-TREK JX06se Bluetooth 5.4 Motorcycle Intercom User Manual

Introduction

Thank you for choosing the J-TREK JX06se Bluetooth 5.4 Motorcycle Intercom. This device is designed to enhance your solo riding experience by providing clear audio for music, navigation, and phone calls. It features advanced Bluetooth 5.4 technology, robust noise cancellation, and a durable waterproof design. Please read this manual thoroughly before use to ensure proper installation and operation.

Important Note: The JX06se is designed exclusively for solo riders and does not support connection with other intercom devices.

Safety Information

• Always prioritize road safety. Do not operate the device in a way that distracts you from riding.
• Adjust volume to a level that allows you to hear ambient traffic sounds.
• Ensure the device is securely mounted to your helmet before riding.
• Do not attempt to disassemble or modify the device.
• Keep the device away from extreme temperatures and direct sunlight.

Package Contents

Verify that all items are present in your package:

• JX06se Main Unit x 1
• Jet Helmet Microphone x 1
• Full-Face Helmet Microphone x 1
• Magnetic Mount x 1
• Speakers x 1 pair
• Speaker Fixing Tape x 2
• Jet Helmet Microphone Fixing Tape x 1
• Full-Face Helmet Microphone Fixing Tape x 1
• USB Type-C Charging Cable x 1
• Mount Fixing Tape (Red) x 1 (for attachment)
• Clip-type Fixing Tape (White) x 1 (for mount attachment)
• Speaker Position Adjustment Pads x 2
• User Manual x 1
• Mount Clip x 1

Features

• Advanced Bluetooth 5.4: Ensures stable, low-latency connections for music, navigation, and calls.
• High-Quality Audio & Noise Cancellation: Features a high-quality driver unit and multi-layer noise canceling technology (ENC, DSP, CVC) to effectively suppress wind noise and engine sounds, providing clear audio even at high speeds.
• Integrated FM Radio: Supports all Japanese domestic FM channels, allowing access to news, traffic information, and music without a smartphone.
• Magnetic Mount System: Offers quick and secure attachment/detachment to your helmet in approximately 1 second.
• RGB Multi-Color Lighting: Personalize your device and enhance visibility during night rides with customizable RGB lights.
• Long-Lasting 1000mAh Battery: Provides extended usage for long-distance touring.
• IP67 Waterproof & Dustproof: Designed to withstand harsh weather conditions, including heavy rain.
• Native Japanese Voice Guidance: All guidance is provided in clear Japanese voice prompts.
• Accurate Battery Level Detection: Announces battery percentage upon power-on and displays an icon on your smartphone.

Setup

1. Installing the Intercom Unit

Choose between the magnetic mount or clip-type fixing tape for attaching the main unit to your helmet. The magnetic mount allows for quick attachment and removal.

2. Installing Speakers and Microphone

Place the speakers inside your helmet's ear pockets. Use the provided speaker position adjustment pads if needed for optimal fit and sound. Select the appropriate microphone (jet helmet or full-face helmet type) and attach it near your mouth using the fixing tape.

3. Charging the Device

Before first use, fully charge the JX06se using the provided USB Type-C cable. Connect the cable to the charging port on the unit and a compatible USB power source. A full charge takes approximately 2 hours.

Operating Instructions

1. Power On/Off

• Power On: Press and hold the Power button for 3 seconds. You will hear a Japanese voice prompt indicating the battery level.
• Power Off: Press and hold the Power button for 3 seconds.

2. Bluetooth Pairing

To pair with your smartphone:

1. With the device off, press and hold the Power button for 5-7 seconds until the LED indicator flashes red and blue, indicating pairing mode.
2. On your smartphone, enable Bluetooth and search for "JX06se".
3. Select "JX06se" to connect. Once connected, the LED will flash blue slowly.

3. Volume Control

• Increase Volume: Press the Volume Up button.
• Decrease Volume: Press the Volume Down button.

4. Music Playback

• Play/Pause: Press the Multi-function button once.
• Next Track: Press and hold the Volume Up button.
• Previous Track: Press and hold the Volume Down button.

5. Call Management

• Answer Call: The device will automatically answer incoming calls after 10 seconds.
• End Call: Press the Multi-function button once.
• Reject Call: Press and hold the Multi-function button for 2 seconds.

6. Voice Assistant

Activate your smartphone's voice assistant (Siri/Google Assistant) by pressing the Voice Assistant button once. You can then issue commands for navigation, music, or other functions.

7. FM Radio

• Turn On/Off FM: Press and hold the FM button for 2 seconds.
• Scan Channels: Press the FM button once to scan for the next available station.

8. RGB Lighting

The JX06se features RGB multi-color lights. Refer to the specific button on your device for changing light colors or modes. This feature enhances personal style and night visibility.

Maintenance

• Cleaning: Wipe the unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the device in a cool, dry place when not in use. Avoid prolonged exposure to direct sunlight or extreme temperatures.
• Water Resistance: While IP67 rated, ensure the charging port cover is securely closed to maintain water and dust resistance.

Troubleshooting

Specifications

Warranty & Support

The J-TREK JX06se comes with a 1-year product warranty. During this period, we offer free repair or replacement for any manufacturing defects.

For questions, technical assistance, or warranty claims, please contact our support team:

Email: support@j-trek.com

We are committed to providing excellent support for your J-TREK product.