IBELL MINCEPRO750

iBELL MINCEPRO750 Stainless Steel Meat Grinder User Manual

Model: MINCEPRO750

Introduction

Thank you for choosing the iBELL MINCEPRO750 Stainless Steel Meat Grinder. This appliance is designed for efficient and powerful meat processing in your home kitchen. Equipped with an 800W motor, it ensures quick grinding with consistent results. This manual provides essential information for the safe and effective use, assembly, operation, maintenance, and troubleshooting of your new meat grinder. Please read all instructions carefully before first use and retain this manual for future reference.

Important Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions:

  • Read all instructions before operating the appliance.
  • Do not immerse the motor unit in water or other liquids.
  • Always unplug the appliance from the power outlet before cleaning, assembling, or disassembling parts.
  • Keep hands and utensils away from moving parts during operation to prevent injury. Never push food with your hands. Always use the food pusher provided.
  • Ensure all parts are correctly assembled before operating the grinder.
  • Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
  • This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Use only manufacturer-recommended attachments.
  • Do not use outdoors. This appliance is for household use only.
  • Avoid contact with moving parts.

Product Components

The iBELL MINCEPRO750 Meat Grinder comes with the following components:

  • Mincer Machine (Motor Unit)
  • Mincer Head
  • Hopper Plate
  • Fixing Ring
  • Grinding Plates (3 types: Coarse, Medium, Fine)
  • Sausage Funnel
  • Food Pusher
  • Cutter Blade
  • Spiral Shaft
Diagram showing labeled components of the iBELL MINCEPRO750 Meat Grinder: Hopper Plate, Mincer Head, Fixing Ring, and Mincer ON/OFF Reverse Switch.
Figure 1: Key components of the iBELL MINCEPRO750 Meat Grinder. This image illustrates the Hopper Plate, Mincer Head, Fixing Ring, and the Mincer ON/OFF Reverse Switch on the main unit.

Setup and Assembly

Follow these steps to assemble your meat grinder before use:

  1. Install the Spiral Shaft: Insert the spiral shaft into the mincer head.
  2. Install the Cutter Head: Place the cutter blade onto the end of the spiral shaft, ensuring the cutting edge faces outwards.
  3. Install the Meat Plate: Select your desired grinding plate (coarse, medium, or fine) and place it over the cutter blade, aligning the notch with the pin on the mincer head.
  4. Tighten the Front Cover: Secure the fixing ring onto the mincer head by turning it clockwise until it is tight.
  5. Attach Mincer Head to Motor Unit: Insert the assembled mincer head into the motor unit's opening and secure it firmly.
  6. Place Hopper Plate: Position the hopper plate on top of the mincer head.
Step-by-step visual guide for assembling the iBELL MINCEPRO750 Meat Grinder, showing installation of spiral shaft, cutter head, meat plate, and front cover.
Figure 2: Visual assembly steps for the iBELL MINCEPRO750 Meat Grinder. This image demonstrates the sequence of installing the spiral shaft, cutter head, meat plate, and tightening the front cover, leading to a ready-to-use state.

Important Blade Orientation: Ensure the blade is inserted with the cutting edge facing outwards, as shown in the correct illustration below. Incorrect blade insertion will prevent proper grinding.

Illustration demonstrating the correct and incorrect way to insert the blade into the iBELL MINCEPRO750 Meat Grinder, emphasizing the cutting edge facing out.
Figure 3: Correct blade insertion for the iBELL MINCEPRO750 Meat Grinder. The image clearly shows the blade's cutting edge must face out for proper function, with an incorrect example for comparison.

Operating Instructions

Before operating, ensure the unit is properly assembled and plugged into a suitable power outlet.

  1. Prepare Meat: Cut meat into small pieces (approximately 2-3 cm) that can easily fit into the feeding tube. Remove bones, gristle, and excessive fat.
  2. Select Grinding Plate: Choose the desired grinding plate (coarse, medium, or fine) based on your recipe requirements.
  3. Start Grinder: Turn the ON/OFF switch to the 'ON' position.
  4. Feed Meat: Place the prepared meat onto the hopper plate and gently feed it into the feeding tube using the food pusher. Never use your fingers or other utensils to push meat into the grinder.
  5. Reverse Function: If the grinder becomes clogged, switch the unit to the 'R' (Reverse) position for a few seconds to clear blockages. Then switch back to 'ON' to continue grinding.
  6. Sausage/Kebab Making: To make sausages or kebabs, replace the grinding plate and cutter blade with the appropriate attachment (sausage funnel or kebab attachment) after initial grinding.
  7. Finish Grinding: Once all meat is processed, turn the switch to 'OFF' and unplug the appliance.
Visual representation of the iBELL MINCEPRO750 Meat Grinder's interchangeable attachments: coarse, medium, and fine grinding plates, sausage funnel, and meat mincer hopper.
Figure 4: Grinding plates and attachments for the iBELL MINCEPRO750 Meat Grinder. This image displays the coarse, medium, and fine grinding plates, along with the sausage funnel and meat mincer hopper, demonstrating versatility for various grind styles.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your iBELL MINCEPRO750 Meat Grinder.

  1. Unplug: Always unplug the appliance from the power outlet before cleaning.
  2. Disassemble: Disassemble all removable parts (mincer head, spiral shaft, blade, grinding plate, fixing ring, hopper plate).
  3. Clean Parts: Wash all removable parts in warm, soapy water. Use a brush to remove any meat residue from the grinding plates and blade. Rinse thoroughly.
  4. Dry Thoroughly: Dry all parts immediately after washing to prevent rust, especially for stainless steel components.
  5. Clean Motor Unit: Wipe the motor unit with a damp cloth. Never immerse the motor unit in water or any other liquid.
  6. Storage: Store the clean and dry appliance and its accessories in a dry place.

Troubleshooting

If you encounter issues with your meat grinder, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Motor does not start.Appliance not plugged in; power outage; switch in wrong position.Check power connection; verify power supply; ensure switch is in 'ON' position.
Meat is not grinding or grinding slowly.Blade inserted incorrectly; parts not assembled tightly; meat pieces too large or tough; grinder clogged.Ensure blade cutting edge faces out; tighten fixing ring; cut meat into smaller pieces; use reverse function to clear clogs.
Loud noise during operation.Parts not assembled correctly; foreign object inside.Disassemble and reassemble all parts carefully; check for any foreign objects and remove them.
Appliance stops during operation.Overheating due to continuous use; motor overload.Turn off and unplug the appliance. Allow it to cool down for at least 30 minutes before resuming use. Reduce load if processing tough ingredients.

Technical Specifications

Model NumberMINCEPRO750
BrandIBELL
Power800W
MaterialStainless Steel accessories with Plastic body
ColorSilver
Item Weight2.35 Kilograms
Item Dimensions (L x W x H)27L x 12.5W x 29H Centimeters
Country of OriginChina
Included ComponentsFixing Ring, Grinding Plates (3 nos), Sausage Funnel, Hopper Plate, Mincer Head, Mincer Machine

Warranty and Customer Support

Your iBELL MINCEPRO750 Meat Grinder comes with a comprehensive warranty and dedicated customer support.

  • Standard Warranty: 6 Months Standard Warranty.
  • Additional Warranty: An additional 6 Months Warranty is available upon free registration. Registration must be completed within 30 days from the date of purchase.
  • Manufacturer: Innovative Technologies, iBELL Fida's Building, Thottumugham P.O, Aluva, Kerala - 683105
  • Customer Support: For any queries, assistance, or warranty claims, please contact:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.