1. Important Safety Information
Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Do not operate the jump starter if it is damaged.
- Do not jump start a frozen battery.
- Ensure proper polarity connection (red clamp to positive, black clamp to negative).
- Keep out of reach of children.
- Use in a well-ventilated area.
- Do not expose to rain or wet conditions.
- Disconnect the jump starter from the vehicle battery immediately after starting.
- Do not use the air compressor for purposes other than inflating specified items.
Warning: This device contains a Lithium-Ion battery. Dispose of properly according to local regulations.
2. Package Contents
Verify that all items are present in the package:
- BRPOM G10 Jump Starter with Air Compressor
- Smart Jumper Cables (12V)
- USB-C Charging Cable
- Detachable Air Hose
- 4 Air Nozzles
- Durable Carrying Case
- User Manual
3. Product Overview
The BRPOM G10 is a multi-functional device designed for vehicle emergencies and maintenance. It combines a powerful jump starter, a portable air compressor, an LED flashlight, and a USB power bank.
Key Features:
- 9000A Peak Current: Capable of starting 12V vehicles (gasoline up to 12.0L, diesel up to 12.0L).
- 160PSI Air Compressor: Portable tire inflator with auto-stop function and multiple pressure units (PSI, BAR, KPA, kg/cm²).
- Smart LED Display: Shows battery level, real-time pressure, and operating status.
- 600LM LED Light: Features steady, strobe, and SOS modes for various situations.
- USB Output: Functions as a power bank for charging mobile devices.
- 10 Safety Protections: Integrated smart clamps protect against reverse polarity, short circuits, overcurrent, overload, high voltage, and abnormal temperatures.
4. Setup and Charging
4.1 Initial Charge
Before first use, fully charge the BRPOM G10. Connect the USB-C charging cable to the device's input port and to a suitable USB power adapter (not included). The LED display will indicate the charging status and battery level. A full charge is recommended for optimal performance.
4.2 Checking Battery Level
The LED display shows the current battery percentage. Ensure the device has sufficient charge before attempting to jump start a vehicle or use the air compressor for extended periods.
5. Operating Instructions
5.1 Jump Starting a Vehicle
Follow these steps to safely jump start your vehicle:
- Connect Smart Clamps: Insert the smart jumper cable connector into the jump starter's 12V output port. The indicator light on the clamp connector will flash red and green alternately.
- Attach to Battery: Connect the red clamp to the vehicle's positive (+) battery terminal and the black clamp to the vehicle's negative (-) battery terminal. Ensure a secure connection. The indicator light on the clamp will turn solid green when connected correctly.
- Start Vehicle: Start your vehicle's engine within 30 seconds.
- Remove Clamps: Once the vehicle starts, immediately remove the smart clamps from the vehicle battery, then disconnect the cable from the jump starter.
Forced Start Function:
If the vehicle battery is completely dead or at very low voltage, the smart clamps may not detect it. In such cases, you can use the forced start function:
- Connect the smart clamps to the jump starter and then to the vehicle battery as described above.
- Press and hold the "Forced Start" button (if available, typically indicated by a specific icon or button on the clamp connector) for 3-5 seconds until the indicator light turns solid green.
- Immediately start the vehicle.
- Important: Using the forced start function bypasses some safety detections. Exercise caution.
5.2 Using the Air Compressor
The integrated air compressor can inflate tires, bicycle tires, sports balls, and other inflatables.
- Connect Air Hose: Screw the detachable air hose onto the air output port of the jump starter. Attach the appropriate nozzle to the item you wish to inflate.
- Power On & Select Mode: Press the power button to turn on the device. Briefly press the "M" button to select the desired inflation mode (e.g., car, motorcycle, bicycle, ball). The LED display will show the current pressure and target pressure.
- Set Pressure: Use the "+" and "-" buttons to adjust the target pressure. You can also change pressure units (PSI, BAR, KPA, kg/cm²) by pressing the "M" button repeatedly.
- Start Inflation: Press and hold the "OK" button for 3 seconds to begin inflation. The compressor will automatically stop once the preset pressure is reached.
5.3 Using the LED Light
The BRPOM G10 features a 600LM LED light with multiple modes:
- Turn On/Off: Press the light button (often indicated by a flashlight icon) to turn the light on or off.
- Change Modes: Briefly press the light button repeatedly to cycle through modes: Steady On > Strobe > SOS > Off.
5.4 USB Charging Output
Use the USB output port to charge mobile phones, tablets, or other USB-powered devices. Connect your device's charging cable to the USB output port on the BRPOM G10.
6. Maintenance
- Recharge Regularly: To prolong battery life, recharge the jump starter every 3-6 months, even if not in use.
- Cleanliness: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Storage: Store the device in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Inspection: Periodically inspect the jumper cables and air hose for any signs of damage or wear. Replace if necessary.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Charge the device fully. |
| Vehicle does not start. | Incorrect clamp connection; vehicle battery too low; vehicle issue. | Ensure correct polarity. Try forced start function. Check vehicle for other issues. |
| Air compressor not inflating. | Air hose not securely connected; target pressure not set; battery low. | Ensure hose is tight. Set target pressure. Charge device. |
| Smart clamps indicator light flashing red/green. | Ready for connection. | Connect to vehicle battery. |
| Smart clamps indicator light solid red. | Reverse polarity or short circuit detected. | Disconnect and reconnect clamps with correct polarity. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | G10 |
| Peak Current | 9000 Amps |
| Voltage | 12 Volts |
| Battery Capacity | 7200 mAh (Lithium Polymer) |
| Air Compressor Pressure | Up to 160 PSI |
| LED Light Brightness | 600 Lumens |
| Product Dimensions | 8 x 8 x 10 cm |
| Product Weight | 1.2 kg (1200 Grams) |
| Compatible Vehicle Types | Car, Motorcycle, SUV, Pickup Truck, Boat, Gasoline Vehicle, Diesel Vehicle |
| Certifications | CE, FCC, RoHS |
| UPC | 684514186773 |
9. Warranty and Support
9.1 Manufacturer's Warranty
The BRPOM G10 Jump Starter with Air Compressor comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or neglect.
9.2 Customer Support
For technical assistance, warranty claims, or general inquiries, please contact BRPOM customer support. Refer to the contact information provided on the official BRPOM website or the warranty card included in your package.
Please have your model number (G10) and proof of purchase ready when contacting support.
