bmani H1 Hybrid Active Noise Cancelling Headphones User Manual

Introduction

Thank you for choosing the bmani H1 Hybrid Active Noise Cancelling Headphones. These headphones are designed to provide an immersive audio experience with advanced noise cancellation, extended battery life, and comfortable wear. This manual will guide you through the setup, operation, and maintenance of your new headphones.

What's in the Box

• bmani H1 Noise Cancelling Headphones
• 3.5mm AUX Audio Cable
• USB-C Charging Cable
• User Manual

Product Features

4-Stage Hybrid Active Noise Cancelling System

The H1 headphones incorporate a 4-layer hybrid Active Noise Cancelling (ANC) architecture with four high-sensitivity microphones. These microphones detect and analyze ambient sound, and an ultra-fast ANC chip processes noise within 2ms, blocking up to 95% of distractions with a maximum reduction of 45dB. This system allows for a quiet listening experience in various environments.

Extended Battery Life and Comfort

Enjoy up to 120 hours of listening on a single charge. A quick 10-minute charge provides up to 3 hours of playback. The headphones feature a pressure-relieving headband and slow-rebound memory foam ear cushions for comfort during extended use, suitable for travel, commuting, or office work.

6-Mic Environmental Noise Cancellation (ENC) for Clear Calls

Equipped with a 6-microphone array (2 feedforward, 4 feedback), the ENC system captures and identifies environmental sound, reducing up to 95% of ambient noise. AI algorithms suppress traffic, wind, and crowd noise, ensuring clear voice transmission for calls even in noisy environments.

Immersive Hi-Fi Sound & 360° Spatial Audio

The 40mm dynamic drivers with composite diaphragms deliver balanced high-fidelity audio with deep bass and total harmonic distortion below 3%. Built-in gyroscopes and accelerometers enable real-time head tracking, dynamically adjusting sound positioning for a stable 3D audio field, enhancing movies, music, and gaming.

Bluetooth 6.0 & AUX Wired Mode

Advanced Bluetooth 6.0 offers faster connection speeds (up to 2x faster than standard Bluetooth) and a stronger, more stable signal. For wired use, connect the included 3.5mm AUX cable for lower latency and stable audio, ideal for flights, gaming, or studio work.

Setup

Charging the Headphones

Before first use, fully charge your bmani H1 headphones. Connect the provided USB-C charging cable to the charging port on the headphone and to a compatible USB power source. The LED indicator will show charging status.

Bluetooth Pairing

1. Ensure the headphones are powered off.
2. Press and hold the Power button until the LED indicator flashes blue and red, indicating pairing mode.
3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
4. Select "H1" from the list of devices.
5. Once connected, the LED indicator will turn solid blue.

Wired Connection (AUX Mode)

To use the headphones in wired mode, connect one end of the 3.5mm AUX audio cable to the audio input port on the headphones and the other end to your audio device. This mode works even if the headphone battery is depleted.

Operating Instructions

Power On/Off

• Power On: Press and hold the Power button for 3 seconds.
• Power Off: Press and hold the Power button for 5 seconds.

Music Control

• Play/Pause: Press the Play/Pause button once.
• Next Track: Double-click the Play/Pause button.
• Previous Track: Triple-click the Play/Pause button.
• Volume Up: Press the '+' button.
• Volume Down: Press the '-' button.

Call Control

• Answer/End Call: Press the Play/Pause button once.
• Reject Call: Press and hold the Play/Pause button for 2 seconds.

ANC/Transparency Mode Control

Press the ANC button to cycle through Active Noise Cancellation (ANC) mode, Transparency mode, and normal mode. Transparency mode allows you to hear your surroundings while still enjoying audio.

Game Mode

The headphones feature a Game Mode for optimized audio processing, reduced latency (35ms ultra-low latency), improved connection stability, and precise directional sound during gaming. Refer to the included user manual for specific activation instructions for Game Mode.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the headphones. Do not use harsh chemicals or abrasive materials.
• Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures. When traveling, utilize their foldable design to protect them.
• Water Resistance: The headphones are water resistant. Avoid submerging them in water or exposing them to heavy rain.

Troubleshooting

• Cannot Power On: Ensure the headphones are charged. Connect to a power source and try again.
• Cannot Pair via Bluetooth: Ensure the headphones are in pairing mode (flashing blue/red LED). Check your device's Bluetooth settings and try reconnecting. If issues persist, restart both devices.
• No Sound: Check volume levels on both the headphones and your connected device. Ensure the headphones are properly paired or the AUX cable is securely connected.
• Poor Call Quality: Ensure the microphones are not obstructed. Try moving to an area with less ambient noise or disabling ANC if it's interfering.

Specifications

Warranty and Support

Warranty Information

The bmani H1 headphones come with a 5-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims.

Customer Support

For any questions, technical support, or warranty inquiries, please contact bmani US Store directly through your Amazon order page or visit the bmani Store on Amazon.