LIVELYGLOW Small Vanity Set with Lighted Mirror & Power Station

1. Introduction

Thank you for choosing the LIVELYGLOW Small Vanity Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new vanity set. Please read these instructions carefully before use and retain them for future reference.

Safety Information

• Always unplug the vanity before assembly or disassembly.
• Be cautious of sharp edges and pinch points during assembly.
• Do not overload the power station; it supports up to 1800W.
• Ensure the vanity is stable and secure before use.
• Keep the vanity and its electrical components away from water.
• Always follow the instructions for proper assembly and usage.

2. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Vanity Table Components
• Lighted Mirror
• Power Station Unit
• Storage Stool
• Hair Dryer Rack
• Assembly Hardware (screws, brackets, etc.)
• Assembly Tools (Allen wrench)

Image 2.1: Complete LIVELYGLOW Small Vanity Set.

3. Setup & Assembly

Assembly is required for this vanity set. It is recommended to have a second person assist with certain steps. An electronic screwdriver may be helpful for faster assembly.

Assembly Steps:

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out and identify each part using the provided diagram in your separate assembly guide.
2. Assemble the Main Desk Frame: Attach the side panels to the tabletop using the designated screws and connectors. Ensure all connections are secure.
3. Install Drawer Slides: Secure the drawer slides to the side panels of the desk frame.
4. Assemble the Drawer: Construct the drawer box and install it onto the slides.
5. Attach Legs and Level Feet: Secure the vanity legs to the bottom of the desk. Adjust the level feet to ensure stability on uneven surfaces.
6. Mount the Mirror Frame: Connect the lighted mirror frame to the tabletop using bracket A. Ensure the mirror is firmly attached.
7. Install Hair Dryer Rack: Attach the hair dryer rack to the designated side of the vanity.
8. Assemble Storage Stool: Follow the separate instructions for assembling the storage stool.
9. Connect Power Station: Integrate the power station unit into its designated slot.

Image 3.1: Product dimensions and component overview.

Image 3.2: Key features and storage areas of the vanity.

4. Operating Instructions

Smart LED Mirror

The integrated mirror features smart LED lighting with three color modes and stepless dimming. To operate:

• Power On/Off: Touch the power icon on the mirror surface to turn the lights on or off.
• Change Color Temperature: Briefly touch the mode icon to cycle through the three color temperatures: Cold White (6000K), Natural White (4000K), and Warm Yellow (3000K).
• Adjust Brightness (Stepless Dimming): Press and hold the power icon to adjust the brightness level. Release when the desired brightness is achieved.

Image 4.1: LED mirror with adjustable color temperatures.

Integrated Power Station

The vanity includes a built-in power station for convenient charging and use of styling tools.

• Usage: Plug your devices (e.g., phone charger, hair dryer, curling iron) directly into the outlets on the power station.
• Capacity: The power station supports a maximum load of 1800W. Do not exceed this limit to prevent electrical hazards.

Image 4.2: Multi-charging station and hairdryer rack details.

Storage Stool

The included stool serves as both seating and additional storage.

• Storage Access: Lift the top cushion of the stool to access the internal storage compartment.
• Space-Saving: The compact design allows the stool to slide completely under the vanity when not in use.

Image 4.3: Storage stool features.

5. Maintenance & Care

To ensure the longevity and appearance of your vanity set, follow these care guidelines:

• Cleaning Surfaces: Wipe the vanity surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Mirror Care: Clean the mirror with a glass cleaner and a lint-free cloth. Do not spray cleaner directly onto the mirror to prevent liquid from entering the electrical components.
• Electrical Components: Ensure the power station and LED mirror wiring remain dry. Do not immerse any electrical parts in water.
• Tighten Fasteners: Periodically check and tighten all screws and fasteners to maintain structural integrity.
• Avoid Overloading: Do not place excessively heavy items on the vanity surface or shelves.

6. Troubleshooting

If you encounter any issues with your LIVELYGLOW vanity set, please refer to the following common solutions:

• LED Mirror Not Lighting Up:
  • Ensure the vanity is properly plugged into a working power outlet.
  • Check if the power switch for the mirror is turned on.
  • Verify that the power cable connecting the mirror to the vanity is securely attached.
• Power Station Not Working:
  • Confirm the main power cord of the vanity is plugged in.
  • Check if the device you are trying to power is functioning correctly.
  • Ensure the total wattage of connected devices does not exceed 1800W.
• Vanity Feels Unstable:
  • Check all assembly screws and tighten any loose ones.
  • Adjust the leveling feet at the bottom of the vanity legs to compensate for uneven flooring.
• Drawer Sticks or Does Not Close Smoothly:
  • Ensure the drawer slides are correctly aligned and free of obstructions.
  • Verify that the drawer was assembled correctly and is not overloaded.

If these steps do not resolve the issue, please contact LIVELYGLOW customer support.

7. Specifications

8. Warranty Information

LIVELYGLOW products are manufactured to high-quality standards. For specific warranty details regarding your vanity set, please refer to the warranty card included in your packaging or contact LIVELYGLOW customer support. Keep your proof of purchase for warranty claims.

9. Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact LIVELYGLOW customer support through the retailer where you purchased the product or visit the official LIVELYGLOW website for contact information.

We are committed to providing excellent service and support for your LIVELYGLOW products.