Introduction
Thank you for choosing the UGREEN Nexode Pro 100W 4-Port USB-C Charger. This intelligent charger is designed to provide efficient and safe charging for a wide range of devices, featuring advanced GaN technology and a smart display for real-time monitoring. Please read this manual carefully to ensure proper use and optimal performance of your device.
Image: The UGREEN Nexode Pro 100W Smart Charger, highlighting its 100W maximum power, five display functions, and 4-in-1 charging capability. The charger is shown plugged into a wall outlet.
Key Features
- 100W Max Power Output: Delivers up to 100W of power, capable of charging a MacBook Pro 14" M54 Pro from 0% to 54% in approximately 30 minutes. Supports Galaxy PPS 60W. (Note: PPS 45W requires a 5A E-Mark cable).
- Smart TFT Display: Features a touch-sensitive screen offering five real-time display options: power, current, voltage, charging protocol, and temperature.
- GaN Technology & Thermal Guard: Utilizes a new-generation GaN chip for enhanced energy efficiency and reduced heat. Real-time temperature monitoring and adaptive charging ensure safety.
- 4-in-1 Simultaneous Charging: Equipped with 3 USB-C ports and 1 USB-A port, allowing simultaneous charging of up to four devices with intelligent power distribution.
- Universal Compatibility: Broad compatibility with a wide range of devices including MacBook, iPhone, Galaxy, Pixel, iPad, Galaxy Tab, Steam Deck, and more.
Package Contents
Please check the package for the following items:
- UGREEN Nexode Pro 100W 4-Port USB-C Charger (Model: X772)
- User Manual
Setup
- Unpack the Charger: Carefully remove the charger and all accessories from the packaging.
- Inspect for Damage: Before use, inspect the charger for any visible damage. Do not use if damaged.
- Connect to Power Outlet: Plug the charger into a standard wall power outlet. The foldable plug design allows for compact storage and easy connection.
- Prepare Devices: Ensure your devices are compatible with USB-C or USB-A charging and have appropriate charging cables.
Image: Illustrations demonstrating the charger's foldable plug for portability, its solid and reliable connection when plugged in, and its compact, space-saving design.
Operating Instructions
Connecting Devices
- Select the Correct Port: The charger features 3 USB-C ports and 1 USB-A port. Use the appropriate port for your device's charging cable.
- Connect Cable: Plug one end of your device's charging cable into the charger's port and the other end into your device.
- Begin Charging: Charging will begin automatically. The smart display will activate to show real-time charging information.
Image: The UGREEN Nexode Pro charger connected to and simultaneously charging a smartphone, a tablet, and a laptop, demonstrating its 4-in-1 fast charging capability.
Smart Display Functions
The integrated TFT smart display provides comprehensive real-time charging data. Tap the screen to cycle through different display modes:
- Total Power Output: Displays the combined wattage being delivered to all connected devices.
- Per-Port Power Output: Shows the individual wattage, current, and voltage for each active port.
- Charging Protocol: Indicates the active fast charging protocol (e.g., PD, QC, PPS).
- Temperature Monitoring: Displays the charger's internal temperature, ensuring safe operation.
Image: The charger's smart display interface, illustrating the five real-time display functions available, including total power, individual port power, charging protocol, and temperature monitoring.
Image: Visuals highlighting the smart touch control for easy navigation, the animated display for clear information, and the overall reliability of the charging experience.
Power Distribution Guide
The charger intelligently distributes power based on the connected devices' needs. Refer to the following diagrams for typical power distribution scenarios:
Image: A diagram illustrating the power distribution guide for the UGREEN Nexode Pro 100W 3C1A charger, showing various output wattages for each port (USB-C1, USB-C2, USB-C3, USB-A) under different load conditions.
Safety Information and Protections
The UGREEN Nexode Pro charger incorporates multiple protection mechanisms to ensure safe and reliable charging:
- Over-Temperature Protection: Real-time temperature monitoring prevents overheating.
- Over-Voltage Protection: Safeguards against excessive voltage input.
- Over-Current Protection: Protects devices from drawing too much current.
- Short-Circuit Protection: Prevents damage from short circuits.
- Thermal Guard System: Adapts charging strategy to maintain optimal temperature.
Always use the charger in a well-ventilated area and avoid covering it during operation.
Image: An X-ray view of the UGREEN Nexode Pro charger, showcasing the internal GaN chip and surrounded by icons representing various safety protections like over-temperature, over-voltage, over-current, and short-circuit protection.
Compatibility
The UGREEN Nexode Pro 100W charger is compatible with a wide range of devices supporting various fast charging protocols (PD 3.0, PPS, QC, SCP, FCP). This includes, but is not limited to:
- Laptops: MacBook Neo/ Air/ Pro M5 M4 M3 M2 M1, and other USB-C compatible laptops.
- Smartphones: iPhone 17/16/15/14/13/12/11 series, Galaxy S26/S25/S24/S23/S22/S21, Galaxy A series, Pixel 10/9/8/7/6, Galaxy Z Fold/Z Flip, and other USB-C compatible smartphones.
- Tablets: iPad Pro/Air/mini, Galaxy Tab series.
- Gaming Devices: Steam Deck.
- Other Devices: Smartwatches, earbuds, and other small electronics.
Image: The UGREEN Nexode Pro charger positioned centrally, surrounded by a diverse array of compatible devices including a laptop, multiple smartphones, a tablet, and a smartwatch, illustrating its universal compatibility with over 1000 charging protocols.
Maintenance
- Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping or subjecting the charger to strong impacts.
- Cable Care: Do not bend or crimp charging cables excessively, as this can damage them.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not powering on/display off. | No power from outlet; loose connection. | Ensure the charger is securely plugged into a working power outlet. Try a different outlet. |
| Device not charging or charging slowly. | Incompatible cable; device not supporting fast charging; multiple devices drawing high power; faulty cable/device. | Use a high-quality, compatible charging cable (e.g., 5A E-Mark for PPS 45W). Check if your device supports fast charging. Refer to the power distribution guide. Try a different cable or device to isolate the issue. |
| Charger feels warm during use. | Normal operation, especially during high-power charging. | This is normal. The GaN technology and Thermal Guard system manage heat. If it becomes excessively hot or emits smoke/odor, disconnect immediately and contact support. |
| Smart display not responding to touch. | Temporary software glitch. | Unplug the charger from the wall outlet, wait a few seconds, and plug it back in to reset. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | X772 |
| Manufacturer | Ugreen Group Limited |
| Input Voltage | 230 Volts |
| Total Power Output | 100 Watts (Max) |
| Output Voltage | 20 Volts (Max) |
| Output Current | 5 Amperes (Max) |
| Total USB Ports | 4 (3x USB-C, 1x USB-A) |
| Connector Type | USB Type C, USB Type A |
| Technology | GaN (Gallium Nitride) |
| Form Factor | Compact |
| Country of Origin | China |
Warranty and Support
This UGREEN product comes with a 2-year manufacturer's warranty. For warranty claims, technical support, or any questions regarding your UGREEN Nexode Pro 100W charger, please contact UGREEN customer service through the retailer where you purchased the product or visit the official UGREEN website for support contact information.
Please retain your proof of purchase for warranty purposes.