Introduction
The QVNNVQ Ultrasonic Dog Bark Control Device is designed to assist in training dogs and managing unwanted behaviors such as excessive barking, jumping, and interacting with strangers. This device utilizes gentle ultrasonic sound to capture your dog's attention without causing harm or pain. It is a safe, humane, and effective tool suitable for most dog breeds and sizes, offering a peaceful and calm environment for both you and your pet.
Image: The QVNNVQ device offers no harm, effective control, and non-contact operation, unlike traditional bark collars that may involve false triggering or require contact.
Setup
Charging the Device
Before initial use, fully charge the device. The device features a USB Type-C port for convenient charging.
- Connect the provided USB Type-C cable to the device and a compatible USB power source (e.g., power bank, USB adapter, car charger, laptop).
- A full charge takes approximately 1.5 hours.
- Once fully charged, the device can last up to 60 days with regular use.
Image: The device features a rechargeable battery with a 1.5-hour charge time, providing up to 60 days of use. It can be charged via power bank, USB adapter, car charger, or laptop.
Power On/Off
Locate the ON/OFF switch on the side of the device. Slide the switch to the 'ON' position to power on the device. Slide it to 'OFF' when not in use to conserve battery.
Operating Instructions
The QVNNVQ device offers three distinct modes to address various training needs.
Image: The device features three modes: Flashlight + Ultrasonic, Ultrasonic only, and Sound Mode. An ON/OFF button is visible on the side.
Selecting a Mode
The device has buttons to select the desired mode:
- Flashlight + Ultrasonic Mode: Activates both the flashlight and ultrasonic sound. This mode can be particularly effective in low-light conditions or for added visual cue.
- Ultrasonic Mode: Emits a high-frequency ultrasonic sound that is audible to dogs but generally inaudible to humans. This is the primary mode for bark deterrence and behavior correction.
- Sound Mode: Produces an audible sound, which can be used for training or to get your dog's attention.
To activate a mode, simply press the corresponding button on the device. The device has a maximum control range of 35 feet.
Image: The device has a maximum control range of 35 feet, effective for addressing behaviors like barking, fighting, and biting.
Effective Usage
- When your dog exhibits unwanted behavior (e.g., barking), point the device towards the dog and press the button for the desired mode.
- Release the button as soon as the dog stops the behavior. Consistency is key for effective training.
- Use the device in various environments, including at home, outdoors, in the park, or during training sessions.
Image: The compact and portable device is ideal for use in diverse settings such as training, outdoor activities, parks, and at home.
Maintenance
- Cleaning: Do not wash the device. Use a soft, dry cloth to wipe the exterior if it becomes dirty. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Battery Care: To prolong battery life, avoid fully discharging the device frequently. Charge it regularly, especially if it will be stored for an extended period.
Troubleshooting
- Device not turning on: Ensure the device is fully charged. Connect it to a power source and allow it to charge for at least 30 minutes before attempting to turn it on again.
- Dog not responding: Ensure the device is pointed directly at the dog. Some dogs may take longer to respond to ultrasonic training. Consistency and patience are crucial. Ensure the device is not too far from the dog (within 35 feet).
- Short battery life: Ensure the device is fully charged for 1.5 hours. If battery life remains significantly shorter than expected, contact customer support.
- No sound/ultrasonic output: Check if the correct mode is selected. If the issue persists, the device may require servicing.
Specifications
| Model Number | BT01 |
| Pet Type | Dog |
| Dimensions | 13 x 7.59 x 5.21 cm |
| Item Weight | 150 grams |
| Recommended Breed/Life Stage | Healthy Adult Dogs |
| Material | Plastic |
| Color | Orange |
| Size | Handheld |
| Quantity | 1 |
| Care Instructions | Do not Wash |
| Special Features | Dog Bark Control |
| Batteries Required | No (Rechargeable via USB-C) |
Warranty and Support
For any questions, concerns, or support regarding your QVNNVQ Ultrasonic Dog Bark Control Device, please refer to the contact information provided with your purchase or visit the official QVNNVQ website. Please retain your proof of purchase for any warranty claims.