bmani H2 Bluetooth Over-Ear Headsets with Active Noise Cancellation

Introduction

Thank you for choosing the bmani H2 Bluetooth Over-Ear Headsets. These headphones are designed to provide a superior audio experience with active noise cancellation, low-latency Bluetooth 6.0 connectivity, and comfortable over-ear design. This manual will guide you through the setup, operation, and maintenance of your new headphones.

What's in the Box

Please check the contents of your package. If any items are missing or damaged, contact customer support.

• bmani H2 ANC Headphones
• 3.5mm AUX Audio Cable
• USB-C Charging Cable
• User Manual

Product Overview

Familiarize yourself with the various components and controls of your bmani H2 headphones.

• Power Button: Press and hold to power on/off.
• Volume Up/Next Track: Short press for volume up, long press for next track.
• Volume Down/Previous Track: Short press for volume down, long press for previous track.
• Multi-function Button (MFB): Play/Pause, Answer/End calls.
• ANC Button: Toggle Active Noise Cancellation on/off.
• USB-C Port: For charging the headphones.
• 3.5mm Audio Jack: For wired connection.
• Battery Display: Shows current battery percentage.

Setup

Charging the Headphones

Before first use, fully charge your bmani H2 headphones. Connect the supplied USB-C cable to the charging port on the headphones and the other end to a USB power source (e.g., wall adapter, computer USB port). The battery display will show the charging progress. A 10-minute charge provides approximately 3 hours of playtime.

Power On/Off

• To Power On: Press and hold the Power button for 3 seconds until the indicator light turns on and you hear a power-on prompt.
• To Power Off: Press and hold the Power button for 3 seconds until the indicator light turns off and you hear a power-off prompt.

Bluetooth Pairing

1. Ensure the headphones are powered off.
2. Press and hold the Power button for 5 seconds until the indicator light flashes blue and red alternately, indicating pairing mode.
3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
4. Select "H2" from the list of devices.
5. Once connected, the indicator light will flash blue slowly, and you will hear a confirmation tone.

Wired Connection (AUX Mode)

You can use the bmani H2 headphones with the included 3.5mm AUX audio cable for a wired connection, even when the battery is low or if Bluetooth is not available.

1. Connect one end of the 3.5mm AUX cable to the audio jack on the headphones.
2. Connect the other end to the 3.5mm audio output of your device.
3. The headphones will automatically switch to wired mode.

Operation

Basic Controls

Active Noise Cancellation (ANC)

The bmani H2 headphones feature Active Noise Cancellation to reduce ambient noise. Press the dedicated ANC button to toggle the feature on or off. When ANC is active, you will experience a significant reduction in surrounding sounds, allowing for a more immersive audio experience.

Spatial Audio

The bmani H2 headphones incorporate 360° Spatial Audio, utilizing built-in gyroscopes and accelerometers to track head movement in real-time. This technology adapts the audio output to create an immersive 3D sound field, enhancing your listening experience.

Clear Calls with 6-Mic Array

The headphones feature an enhanced ENC (Environmental Noise Cancellation) chip and a 6-microphone system. This system precisely detects your voice and ambient noise, producing reverse sound waves to reduce interference and deliver consistently clear calls, even in loud environments.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the headphones. Do not use abrasive cleaners or solvents.
• Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, it is recommended to store them in their original packaging or a protective case.
• Water Resistance: These headphones are Not Water Resistant. Avoid exposure to water or excessive moisture.
• Cable Care: Handle the charging and audio cables gently. Avoid sharp bends or excessive pulling.

Troubleshooting

If you encounter issues with your bmani H2 headphones, refer to the following common solutions:

• Headphones won't power on: Ensure the headphones are fully charged.
• Cannot pair with device:
  1. Ensure the headphones are in pairing mode (indicator light flashing blue and red).
  2. Make sure Bluetooth is enabled on your device and it is within range.
  3. Try a hard reset: With the headphones powered on, press and hold both the Volume Up and Volume Down buttons simultaneously for about 5-7 seconds until the headphones reset. Then attempt pairing again.
  4. Forget the device from your phone's Bluetooth settings and try pairing again.
• No sound:
  1. Check the volume level on both the headphones and your connected device.
  2. Ensure the headphones are properly paired via Bluetooth or the AUX cable is securely connected.
  3. If using AUX, ensure the cable is fully inserted into both the headphone and device jacks.
• Poor sound quality or latency:
  1. Move closer to your connected device to reduce interference.
  2. Ensure there are no obstacles between the headphones and your device.
  3. Try disconnecting and reconnecting the Bluetooth connection.
  4. If using for gaming, ensure your device supports Bluetooth 6.0 for optimal low latency.
• ANC not working effectively: Ensure the ANC button is pressed to activate the feature.
• Battery display stuck at 99%: This is a known characteristic for some units and does not affect battery performance or full charge.

If the issue persists, please contact bmani customer support.

Specifications

Safety Information

• Do not disassemble or modify the headphones.
• Keep away from extreme temperatures, humidity, and liquids.
• Avoid prolonged listening at high volumes to prevent hearing damage.
• Do not use headphones while driving or in situations where you need to hear your surroundings.
• Dispose of the product responsibly according to local regulations.

Warranty and Support

The bmani H2 headphones come with a 5-Year Manufacturer Warranty. For warranty claims, technical support, or any questions not covered in this manual, please contact bmani customer support through the retailer where you purchased the product or visit the official bmani website.

Official Product Videos

Watch these official videos for additional information and demonstrations of the bmani H2 headphones.