1. Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Tilta DJI Osmo Action 6 Street Snap Kit. This kit is designed to enhance the functionality and protection of your DJI Osmo Action 6 camera, offering a full camera cage, a quick-release hand grip with integrated battery storage, a locking dial, and customizable button caps. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Product Overview
The Tilta DJI Osmo Action 6 Street Snap Kit includes the following components:
- Full Camera Cage (TA-T95-FCC-B): Provides robust protection and multiple mounting points for accessories.
- Street Snap Accessories (TA-T95-SNA-B): Includes a quick-release hand grip with battery storage, a locking dial, and swappable button caps.
Figure 2.1: Kit Components
This image displays the individual components of the Tilta DJI Osmo Action 6 Street Snap Kit, including the full camera cage, the quick-release hand grip, and the top plate with the shutter button.
3. Setup Instructions
3.1 Installing the DJI Osmo Action 6 into the Camera Cage
- Open the latch on the side of the camera cage.
- Carefully slide your DJI Osmo Action 6 camera into the cage, ensuring it is seated correctly.
- Close the latch securely until it clicks into place. Verify that the camera is firmly held within the cage.
Figure 3.1: Camera Installation
This image shows the DJI Osmo Action 6 camera properly installed inside the Tilta full camera cage, ready for use.
3.2 Attaching the Quick-Release Hand Grip
- Align the quick-release mechanism on the hand grip with the corresponding slot on the camera cage.
- Slide the grip into place until it locks securely. A distinct click indicates proper attachment.
- To detach, press the release button or lever on the grip and slide it off.
Figure 3.2: Quick-Release Grip Attachment
This image illustrates the quick-release connection point where the hand grip attaches to the camera cage, highlighting the secure locking mechanism.
3.3 Swapping Button Caps
- Gently pull the existing button cap upwards to remove it from its post.
- Align the desired new button cap with the post and press down firmly until it is seated.
Figure 3.3: Button Cap Replacement
This image shows the process of replacing a button cap on the camera cage, highlighting the ease of customization.
4. Operating Instructions
4.1 Using the Locking Dial
The locking dial prevents accidental recording or changes to camera settings. To engage the lock, slide the dial to the right (towards the lock icon). To unlock and enable recording, slide the dial to the left (towards the unlock icon).
Figure 4.1: Locking Dial Operation
This image details the locking dial, indicating how to slide it to prevent unintended camera activation.
4.2 Utilizing the Integrated Battery Storage
The quick-release hand grip features a hidden compartment for storing an additional DJI Osmo Action 6 battery. To access, open the small cover on the grip and insert or remove the spare battery. This allows for quick battery swaps without needing to search through your bag.
Figure 4.2: Battery Storage
This image demonstrates the integrated battery storage compartment within the hand grip, showing a battery being inserted.
5. Maintenance
5.1 Cleaning
To clean the camera cage and hand grip, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by thorough drying. Avoid abrasive cleaners or solvents, as these may damage the finish.
5.2 Storage
Store the kit in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all components are clean and dry before storage. If storing for extended periods, consider detaching the hand grip from the cage.
6. Troubleshooting
6.1 Hand Grip Not Attaching Securely
- Check Alignment: Ensure the quick-release mechanism on the grip is perfectly aligned with the slot on the cage.
- Clear Obstructions: Verify there are no foreign objects or debris preventing a secure connection.
- Apply Firm Pressure: Push the grip firmly until you hear a click, indicating it is locked.
6.2 Accidental Recording
- Engage Locking Dial: Always ensure the locking dial is set to the 'lock' position when not actively recording or when transporting the camera.
- Check Button Cap: Ensure the button cap is properly seated and not stuck in a depressed position.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Tilta |
| Model Number | TA-T95-B-B |
| Compatible Devices | DJI Osmo Action 6 Camera |
| Item Weight | 50 g (0.11 lbs) |
| Materials | 6061 Aluminum Alloy + SUS304 + Silicone + Flocked Lining |
| Dimensions | 4.33 × 2.02 × 2.59 in / 109.9 × 51.3 × 65.7 mm |
| Color | Black |
| UPC | 810193522520 |
8. Warranty and Support
8.1 Warranty Information
This Tilta product comes with a 2 Years Manufacturer Warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
8.2 Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Tilta customer support through their official website or the retailer where the product was purchased. You may need to provide your product model number (TA-T95-B-B) and proof of purchase.
Tilta Official Website: www.tilta.com
