1. Introduction
Thank you for purchasing the GOBOULT Groove Q14 Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it carefully before use to ensure optimal performance and longevity of your device.
2. Safety Information
- Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the speaker to strong impacts.
- Keep the speaker away from water and liquids, despite its splash-resistant design, to prevent damage to internal components.
- Do not attempt to disassemble, repair, or modify the speaker yourself. Contact qualified service personnel for any repairs.
- Use only the provided charging cable or a certified Type-C cable for charging.
- Keep out of reach of children.
3. Package Contents
Verify that all items are present in the package:
- GOBOULT Groove Q14 Bluetooth Speaker
- Power Cable (Type-C)
- Quick Start Guide
- Warranty Card
4. Product Overview
The GOBOULT Groove Q14 is a portable Bluetooth speaker designed for rich audio and versatile connectivity. It features a durable, splash-resistant mesh fabric exterior and dynamic RGB LED lights.
Image: Front view of the GOBOULT Groove Q14 Bluetooth Speaker, showcasing its compact design and mesh fabric finish.
Controls and Ports
Image: Close-up of the speaker's top panel, showing the control buttons: TWS/LED Light, Power, Media Mode, Volume Down/Previous, Play/Pause, and Volume Up/Next.
- TWS/LED Light Button: Press to cycle through LED light modes or long press for TWS pairing.
- Power Button: Long press to power on/off.
- Media Mode Button (M): Press to switch between Bluetooth, TF Card, and USB modes.
- Volume Down / Previous Track (-): Press to decrease volume, long press for previous track.
- Play/Pause Button (►): Press to play or pause music, answer/end calls.
- Volume Up / Next Track (+): Press to increase volume, long press for next track.
Image: Close-up of the speaker's side panel, revealing the Type-C charging port, TF card slot, and USB port, protected by a rubber flap.
- Type-C Charging Port: For charging the speaker.
- TF Card Slot: For playing music directly from a TF (MicroSD) card.
- USB Port: For playing music directly from a USB drive.
5. Setup
5.1 Charging the Speaker
- Connect the provided Type-C charging cable to the speaker's charging port.
- Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
- The LED indicator will show charging status. Once fully charged, the indicator will change or turn off.
A full charge provides approximately 8-10 hours of playtime.
5.2 Powering On/Off
- To Power On: Long press the Power Button until you hear an audible prompt and the LED lights activate.
- To Power Off: Long press the Power Button again until you hear an audible prompt and the LED lights turn off.
5.3 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode (indicated by a flashing blue LED). If not, press the Media Mode Button (M) to switch to Bluetooth mode.
- Enable Bluetooth on your device (smartphone, tablet, laptop, etc.).
- Search for available Bluetooth devices and select "GOBOULT Groove Q14" from the list.
- Once paired, the speaker will emit an audible confirmation, and the blue LED will stop flashing and remain solid.
The speaker will automatically attempt to reconnect to the last paired device when powered on.
5.4 TWS (True Wireless Stereo) Pairing
TWS mode allows you to connect two GOBOULT Groove Q14 speakers for a stereo sound experience.
Image: Two GOBOULT Groove Q14 speakers shown side-by-side, illustrating the True Wireless Stereo (TWS) pairing capability for enhanced sound.
- Ensure both GOBOULT Groove Q14 speakers are powered on and in Bluetooth pairing mode (blue LED flashing).
- On one of the speakers (this will be the primary speaker), long press the TWS/LED Light Button.
- The speakers will attempt to pair with each other. Once successfully paired, you will hear an audible confirmation, and the LED on the primary speaker will flash slowly, while the secondary speaker's LED will remain solid.
- Now, connect your device to the primary speaker via Bluetooth as described in section 5.3.
6. Operating Instructions
6.1 Playing Music
- Bluetooth Mode: After successful pairing, play music from your connected device.
- TF Card Mode: Insert a TF (MicroSD) card with music files into the TF card slot. The speaker will automatically switch to TF card mode and begin playback. If not, press the Media Mode Button (M).
- USB Mode: Insert a USB drive with music files into the USB port. The speaker will automatically switch to USB mode and begin playback. If not, press the Media Mode Button (M).
6.2 Media Controls
- Play/Pause: Press the Play/Pause Button (►).
- Next Track: Long press the Volume Up (+) Button.
- Previous Track: Long press the Volume Down (-) Button.
- Volume Up: Press the Volume Up (+) Button.
- Volume Down: Press the Volume Down (-) Button.
6.3 Call Management (Bluetooth Mode)
- Answer Call: Press the Play/Pause Button (►) once.
- End Call: Press the Play/Pause Button (►) once during a call.
- Reject Call: Long press the Play/Pause Button (►).
6.4 RGB LED Lights
The speaker features dynamic RGB LED lights on its ends.
Image: The GOBOULT Groove Q14 speaker with its dynamic RGB LED lights illuminated, adding a visual element to the audio experience.
- Change Light Mode: Press the TWS/LED Light Button to cycle through different light patterns or turn them off.
7. Maintenance
- Cleaning: Use a soft, dry cloth to wipe the speaker's surface. Do not use abrasive cleaners, alcohol, or chemical solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Battery Care: To prolong battery life, charge the speaker fully before first use and at least once every three months if not used regularly.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on | Low battery; Power button not pressed correctly | Charge the speaker; Long press the Power button |
| Cannot pair via Bluetooth | Speaker not in pairing mode; Device Bluetooth off; Speaker too far | Ensure speaker LED is flashing blue; Enable Bluetooth on device; Move speaker closer (within 10m) |
| No sound | Volume too low; Incorrect mode; Device not playing | Increase speaker/device volume; Press 'M' button to select correct mode; Ensure music is playing on device |
| TWS pairing fails | Speakers too far apart; Incorrect pairing procedure | Ensure speakers are close; Follow TWS pairing steps carefully |
| Poor sound quality | Low battery; Obstructions; Device volume too high (distortion) | Charge speaker; Remove obstructions; Adjust device volume |
9. Specifications
Image: Overview of key features including 14 Watt Bass Boost, Bluetooth 5.4, Dual Dynamic Drivers, Multi Compatibility, and Full Media Control.
| Feature | Detail |
|---|---|
| Model Name | Groove Q14 |
| Brand | GOBOULT |
| Speaker Output Power | 14 Watts (BoomX Audio) |
| Bluetooth Version | 5.4 |
| Connectivity Technology | Bluetooth, TF Card, USB |
| Audio Output Mode | Stereo, Surround |
| Driver Type | Dual Dynamic Drivers with Dual Bass Radiators |
| Control Method | Touch Buttons |
| Battery Life | Up to 8-10 Hours |
| Charging Port | Type-C |
| Wireless Range | Up to 10 meters |
| Waterproof Rating | Yes (Splash Resistant) |
| Weight | 600 Grams |
| Special Features | Dynamic RGB LED Lights, TWS Mode, Hands-Free Calling |
10. Warranty Information
The GOBOULT Groove Q14 Bluetooth Speaker comes with a 1 Year Manufacturer Warranty. Please refer to the included Warranty Card for detailed terms and conditions regarding warranty coverage and claims.
11. Support
For further assistance, technical support, or warranty claims, please refer to the contact information provided on your Warranty Card or visit the official GOBOULT website.
