Introduction
Thank you for choosing the GOBOULT Rave Q10 Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it carefully before use to ensure optimal performance and longevity of your device.
What's in the Box
- GOBOULT Rave Q10 Bluetooth Speaker
- Power Cable (Type-C)
- Quick Start Guide
- Warranty Card
Product Features
- 10W Powerful Audio: Delivers 10 Watts of sound output with enhanced bass.
- Dual Dynamic Drivers: Ensures balanced sound with clear highs and deep bass.
- Bluetooth 5.4 Connectivity: Provides fast and stable wireless connection.
- Multiple Input Options: Supports Bluetooth, TF Card, USB, and Auxiliary playback.
- Integrated Controls: Easy access buttons for music playback, volume, and calls.
- Portable Design: Compact and lightweight for easy transport.
- Hands-Free Calling: Built-in microphone for convenient call management.
- Dynamic RGB Lights: Inbuilt lighting effects to enhance the listening experience.
- TWS Mode: Connect two identical speakers for true wireless stereo sound.
- Waterproof Design: Provides protection against water splashes.
Setup Guide
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the provided Type-C power cable to the charging port on the speaker and the other end to a compatible USB power adapter (not included).
Image: Speaker showing Type-C charging port and other input modes.
The charging indicator light will show the charging status. Once fully charged, the light will change or turn off, depending on the model.
2. Powering On/Off
Press and hold the Power button (usually marked with a power symbol) for a few seconds to turn the speaker on or off. A sound prompt or indicator light will confirm the status.
3. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode. The Bluetooth indicator light will typically flash.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "GOBOULT Rave Q10" from the list of devices.
- Once connected, the speaker will emit a confirmation sound, and the Bluetooth indicator light will become solid.
4. TWS (True Wireless Stereo) Mode
To use two GOBOULT Rave Q10 speakers together for stereo sound:
- Ensure both speakers are powered on and not connected to any other Bluetooth device.
- On one speaker, press and hold the TWS button (refer to the Quick Start Guide for exact button) until you hear a pairing sound. This speaker will become the primary unit.
- The two speakers will automatically connect to each other.
- Once connected, pair your device to the primary speaker via Bluetooth as described above.
Image: Two GOBOULT Rave Q10 speakers demonstrating TWS mode setup.
Operating Instructions
1. Button Functions
Image: Speaker showing control buttons for volume and playback.
- Play/Pause Button (Triangle symbol): Press once to play or pause music.
- Volume Down / Previous Track Button ('-' symbol): Press once to decrease volume. Press and hold to go to the previous track.
- Volume Up / Next Track Button ('+' symbol): Press once to increase volume. Press and hold to go to the next track.
- Call Management: When a call comes in, press the Play/Pause button to answer. Press again to end the call.
2. Input Modes
The speaker supports multiple audio input sources:
- Bluetooth Mode: Connect wirelessly to your device as described in the Setup section.
- TF Card Mode: Insert a TF (microSD) card with audio files into the designated slot. The speaker will automatically switch to TF Card mode and begin playback.
- USB Mode: Insert a USB flash drive with audio files into the USB port. The speaker will automatically switch to USB mode and begin playback.
- Auxiliary Mode: Connect an audio cable (not included) from your device's headphone jack to the speaker's AUX input. The speaker will switch to AUX mode.
3. RGB Lighting Control
The speaker features dynamic RGB lights. Refer to the Quick Start Guide for specific instructions on how to change light modes or turn them off, as this may vary by model revision.
Image: Top view of the speaker showing the illuminated RGB light ring.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Water Resistance: The speaker is waterproof. However, avoid submerging it for extended periods or exposing it to high-pressure water jets. Ensure charging port covers are securely closed when near water.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use for long periods.
Troubleshooting
No Power
- Ensure the speaker is fully charged.
- Check the power cable and adapter for damage.
- Try a different charging cable or power source.
No Sound
- Increase the volume on both the speaker and your connected device.
- Ensure the speaker is correctly paired via Bluetooth or the correct input mode (TF Card, USB, AUX) is selected.
- If using Bluetooth, disconnect and re-pair the device.
- Test with a different audio source or device.
Bluetooth Pairing Issues
- Ensure the speaker is in pairing mode (indicator light flashing).
- Make sure your device's Bluetooth is enabled and within range (up to 10 meters).
- Forget "GOBOULT Rave Q10" from your device's Bluetooth list and try pairing again.
- Turn off and on both the speaker and your device.
TWS Mode Not Connecting
- Ensure both speakers are the same model (GOBOULT Rave Q10).
- Make sure neither speaker is connected to another Bluetooth device before initiating TWS pairing.
- Follow the TWS pairing steps carefully, ensuring one speaker is designated as primary.
Specifications
| Feature | Detail |
|---|---|
| Brand | GOBOULT |
| Model Number | Q10 |
| Speaker Output Power | 10 Watts |
| Connectivity Technology | Auxiliary, Bluetooth, TF card, USB |
| Bluetooth Version | 5.4 |
| Audio Output Mode | Stereo, Surround |
| Speaker Type | Portable Speaker |
| Product Features | Lightweight, Portable, USB Port, Waterproof |
| Waterproof | Yes |
| Maximum Range | 10 metres |
| Control Method | Touch |
| Item Weight | 600 Grams |
| Item Dimensions (D x W x H) | 9D x 9W x 12H Millimeters |
| Audio Driver Type | Dynamic Driver |
| Battery Type | 1 Nonstandard Battery (included) |
Warranty and Support
Warranty Information
The GOBOULT Rave Q10 Bluetooth Speaker comes with a 1 Year Manufacturer's Limited Warranty. Please refer to the included Warranty Card for detailed terms and conditions. Keep your purchase receipt as proof of purchase for warranty claims.
Customer Support
For any technical assistance, troubleshooting, or warranty-related inquiries, please contact GOBOULT customer support.
Manufacturer Contact Information:
B-67 Wazirpur Industrial Area, New Delhi 110052, India
Exotic Mile Pvt. Ltd.
For the most up-to-date support contact details, please visit the official GOBOULT website or refer to the contact information provided on your Warranty Card.
