1. Introduction
Thank you for choosing the TALIX 190W 20000mAh Portable Charger. This high-capacity power bank is designed to provide fast and efficient charging for a wide range of devices, including laptops, tablets, and smartphones. Featuring multiple charging ports and a convenient built-in retractable cable, it is an ideal power solution for both daily use and travel.
Image: The TALIX 190W 20000mAh Portable Charger, showcasing its sleek design and compact form factor.
2. What's in the Box
- 1 x TALIX 190W 20000mAh Portable Charger
- Built-in USB-C Cable
- User Guide
3. Product Features
- 190W Fast Charging: Delivers up to 190W max output via USB-C to power laptops, tablets, and phones quickly.
- 20000mAh High Capacity: Provides multiple charges for smartphones and tablets, and significant power for laptops.
- 3-Port Output: Features two USB-C ports and one USB-A port for simultaneous charging of up to three devices.
- Built-in Retractable USB-C Cable: An integrated 8.66 inch (22 cm) USB-C cable offers convenience and durability, tested to withstand over 30,000 bends.
- Smart LED Display: Shows remaining battery percentage, real-time charging power (input/output), battery temperature, and estimated time to recharge or discharge.
- Fast Input: Supports 30W fast input, allowing the power bank to be fully recharged in approximately 2-3 hours.
- Long-Lasting Battery Cells: Built with premium 18650 cells for extended lifespan and reliable performance over 1,000 charge cycles.
- Wide Compatibility: Supports PD3.0, PPS, QC3.0, AFC, and FCP fast charging protocols, compatible with a broad range of devices including MacBook, iPad, iPhone, Samsung Galaxy, Steam Deck, Switch, earbuds, smartwatches, and drones.
- Flight-Approved Design: Compact and meets TSA carry-on standards for air travel.
- Safety Protections: Includes over-charging protection and short-circuit protection.
Image: An internal diagram illustrating the 20000mAh battery cells and estimated charge capacities for iPhone 16 Pro, Samsung S23, and MacBook Air.
Image: Close-up of the TALIX power bank highlighting the built-in retractable USB-C cable and its 10,000+ bend durability rating.
4. Setup
Before first use, fully charge your TALIX Portable Charger. Use a compatible USB-C power adapter (not included) with a minimum of 30W output for optimal charging speed. The LED display will indicate the charging status.
- Connect a USB-C power adapter to one of the USB-C input/output ports on the power bank.
- The LED display will illuminate, showing the current battery percentage and input wattage.
- Charge until the display shows 100%. This typically takes 2-3 hours with a 30W or higher power adapter.
Image: The TALIX power bank connected to a power source via its USB-C port for recharging.
5. Operating Instructions
5.1 Charging Devices
The TALIX Portable Charger can charge various devices using its USB-C and USB-A ports, or the built-in retractable USB-C cable.
- Using the Built-in USB-C Cable: Gently pull out the retractable USB-C cable and connect it to your compatible device.
- Using USB-C Ports: Connect your device to either USB-C1 or USB-C2 port using a compatible USB-C to USB-C cable. These ports support up to 140W each for single-port charging.
- Using USB-A Port: Connect your device to the USB-A port using a compatible USB-A cable. This port supports up to 30W.
Image: Illustration showing the fast charging capabilities of the TALIX power bank for MacBook Air 15, Galaxy S24 Ultra, iPad Air 13, and iPhone 16 Pro Max.
5.2 Charging Multiple Devices
The power bank can charge up to three devices simultaneously. The total output wattage will be distributed among the connected devices.
- Two-Port Charging:
- USB-C1 + USB-A: Up to 155W (125W + 30W)
- USB-C1 + USB-C2: Up to 190W (125W + 65W)
- Three-Port Charging:
- USB-C1 + USB-C2 + USB-A: Up to 145W (125W + 20W)
Image: A user charging a laptop, smartphone, and wireless earbuds simultaneously using the TALIX power bank's multiple ports.
5.3 LED Display Information
The integrated LED display provides real-time information about the power bank's status:
- Battery Percentage: Shows the remaining charge level.
- Input/Output Wattage: Displays the power being drawn by or supplied to each port (C1, C2, A).
- Battery Temperature: Indicates the internal temperature of the power bank.
- Time Remaining: Estimates the time until the power bank is fully charged or depleted based on current usage.
Image: Close-up of the TALIX power bank's LED display, showing 86% battery, 99 hours 59 minutes remaining, and 23°C temperature.
6. Maintenance
To ensure the longevity and optimal performance of your TALIX Portable Charger, follow these maintenance guidelines:
- Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the exterior. Avoid using harsh chemicals or abrasive materials.
- Charging Cycles: For best battery health, avoid completely draining the power bank frequently. Recharge it when the battery level is low.
- Cable Care: When retracting the built-in cable, do so gently to prevent damage. Avoid excessive force or sharp bends.
- Avoid Drops: Protect the device from drops and impacts, which can damage internal components.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging | Charging cable or adapter is faulty; power bank is fully charged; input port is dirty. | Try a different cable and adapter. Ensure the power bank is not already at 100%. Clean the input port gently. |
| Device not charging from power bank | Device cable is faulty; power bank is depleted; device is incompatible; output port is dirty. | Ensure the power bank has sufficient charge. Try a different cable. Verify device compatibility. Clean the output port gently. |
| Slow charging speed | Cable or adapter not supporting fast charging; multiple devices connected; device not supporting fast charging. | Use a high-quality, fast-charging compatible cable and adapter. Disconnect other devices for maximum single-port output. Ensure your device supports fast charging protocols. |
| LED display not working | Power bank is off; internal malfunction. | Press the power button to activate the display. If the issue persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | Portable Power Bank |
| Model Number | PBLN20190A |
| Brand | TALIX |
| Battery Capacity | 20000 Milliamp Hours (mAh) |
| Maximum Output Power | 190W |
| Number of Ports | 3 (2x USB Type-C, 1x USB Type-A) |
| Connector Type | USB Type A, USB Type C |
| Output Current | 3 Amps (per port, varies with load) |
| Voltage | 20 Volts (max) |
| Amperage | 5 Amps (max) |
| Special Features | Built-in Cable, Digital Display, Fast Charging, Over Charging Protection, Short Circuit Protection |
| Compatible Devices | Headphone, Laptop, Smartphone, Smartwatch, Tablet, Drone |
| Item Weight | 15.87 Ounces |
| Item Dimensions (L x W x Thickness) | 6.02" x 2.95" x 0.79" |
| Color | Silver |
8.1 Port Output Details
- USB-C1: 140W Max (single port)
- USB-C2: 140W Max (single port)
- USB-A: 30W Max (single port)
Image: Diagram illustrating the maximum wattage output for each port when used individually.
Image: Diagram illustrating combined wattage output when two ports are used simultaneously.
Image: Diagram illustrating combined wattage output when three ports are used simultaneously.
9. Warranty and Support
The TALIX 190W 20000mAh Portable Charger comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact TALIX customer service through the retailer where the product was purchased or visit the official TALIX website for contact information.
10. Product Video Overview
Video: An official product video from TALIX providing a visual overview of the 190W Power Bank's features and functionality.