Coleman Classic Series 52qt Portable Cooler User Manual

Introduction

This manual provides instructions for the proper use and care of your Coleman Classic Series 52-quart portable cooler. Designed for durability and performance, this cooler is ideal for outdoor activities, keeping contents cold for extended periods.

Key features include:

• Fully insulated lid and body for ice retention up to 3 days in temperatures as high as 90°F.
• Capacity to hold up to 80 cans.
• Have-A-Seat lid supports up to 250 lb.
• Stain-resistant liner for easy cleanup.
• Made in the USA.

Setup

Before first use, ensure the cooler is clean. No assembly is required for this portable cooler.

Initial Cleaning

Wipe the interior and exterior with a damp cloth. For thorough cleaning, use mild soap and water. Rinse completely and allow to air dry before use or storage.

Preparing for Use

For optimal ice retention, pre-chill the cooler by placing a bag of ice inside for a few hours before loading it with food and drinks. This helps lower the internal temperature of the cooler's insulation.

Image: The Coleman Classic Series 52qt Portable Cooler in Desert Sand color, ready for use.

Operating Instructions

Loading the Cooler

Place items to be kept cold inside the cooler. For best results, use a combination of ice, ice packs, or frozen items. Fill the cooler as much as possible to minimize air space, which helps maintain cold temperatures.

Image: An open Coleman cooler filled with beverages and ice, demonstrating its capacity and multi-day ice retention feature.

Ice Retention

The fully insulated lid and body are designed to keep ice for up to 3 days in ambient temperatures up to 90°F (32°C). Keep the lid closed as much as possible to preserve the internal temperature.

Have-A-Seat Lid

The sturdy lid is designed to support up to 250 lbs, allowing it to be used as an extra seat. Ensure the lid is securely closed before using it as a seat.

Image: A person sitting on the lid of a Coleman cooler, illustrating the "Have-A-Seat Lid" feature that supports up to 250 lbs.

Built-in Cup Holders

The lid features four built-in cup holders, each capable of holding a 30 oz tumbler, to prevent spills.

Image: A close-up view of the Coleman cooler lid, highlighting the four built-in cup holders designed to hold 30 oz tumblers.

Drain Plug

The cooler is equipped with a tethered drain plug for easy draining of melted ice. The tether ensures the plug remains attached to the cooler, preventing loss.

Image: A close-up of the tethered drain plug on the Coleman cooler, designed to resist leaks and prevent loss.

Portability

The cooler features easy-grip handles for convenient transport.

Image: Two people carrying a Coleman cooler using its easy-grip handles, demonstrating its portability.

Maintenance

Cleaning

The cooler features a stain-resistant liner and an EZ-Clean lid for simple maintenance. After each use, drain any remaining water through the drain plug. Wipe the interior and exterior with a damp cloth. For stubborn stains or odors, use a solution of mild soap and water, then rinse thoroughly. Ensure the cooler is completely dry before closing the lid for storage to prevent mold or mildew growth.

Image: A person cleaning the interior of a Coleman cooler, highlighting its stain-resistant liner and EZ-Clean lid for quick cleanup.

Storage

Store the cooler in a cool, dry place away from direct sunlight. It is recommended to leave the lid slightly ajar during storage to allow for air circulation and prevent odors.

Troubleshooting

This section addresses common issues you might encounter with your cooler.

Poor Ice Retention

• Issue: Ice melts faster than expected.
• Solution:
  1. Ensure the cooler was pre-chilled before use.
  2. Minimize opening the lid.
  3. Fill the cooler as much as possible with ice and contents to reduce air space.
  4. Keep the cooler in a shaded area if possible.

Leaking

• Issue: Water is leaking from the cooler.
• Solution:
  1. Check that the drain plug is securely tightened.
  2. Inspect the drain plug and lid gasket for any damage or debris that might prevent a proper seal.

Odor

• Issue: Unpleasant odor inside the cooler.
• Solution:
  1. Clean the cooler thoroughly with a solution of baking soda and water, then rinse well.
  2. Ensure the cooler is completely dry before storage.
  3. Store with the lid slightly ajar to allow air circulation.

Specifications

Warranty Information

This Coleman Classic Series Cooler comes with a 1-year limited warranty. For specific details regarding warranty coverage and claims, please refer to the official Coleman website or contact customer support.

Warranty Type: Limited

Warranty Description: 1 year limited warranty

Support

For further assistance, product registration, or to view additional products, please visit the official Coleman website.

You can also visit the Coleman Store on Amazon for more information.