1. Introduction
Thank you for choosing the Ortis KJ-137 WiFi Smart Pool Timer. This device provides intelligent control over your pool equipment and outdoor lighting, allowing for remote operation and scheduled automation via the GeniLife app. With dual independently controlled outlets, it offers convenience and energy efficiency for various outdoor applications.
2. Safety Information
Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or property damage.
- This device is designed for outdoor use. Ensure all connections are secure and protected from water ingress.
- Do not exceed the maximum load capacity of 15A (120V / 1800W) for the entire unit. The total current for both outlets combined must not exceed 15A.
- Always connect the timer to a grounded GFCI (Ground Fault Circuit Interrupter) outlet for safety.
- Ensure the appliance plugs connected to the timer are in good condition and fully inserted.
- Do not immerse the timer in water.
- Keep children away from the device and connected appliances.
- Disconnect power before performing any maintenance or cleaning.
Image: Close-up of the UL Listed plug, emphasizing safety and compliance.
3. Package Contents
Please check the package for the following items:
- Ortis KJ-137 WiFi Smart Pool Timer Unit
- User Manual
4. Product Features
- App-Enabled Smart Control: Control your pool equipment remotely via the GeniLife APP, compatible with both 2.4GHz and 5GHz WiFi networks. Turn devices on or off from your smartphone.
- Flexible Scheduling Options: Set customized operation schedules with daily repeat cycles, countdown modes, or on/off intervals for precise, automated control.
- Dual Outlets: Equipped with two independently controlled outlets, allowing simultaneous management of multiple devices like a pool pump and a salt chlorinator. Supports compatible extension power strips (total load not exceeding 15A).
- Clear Display & Easy Operation: Features a high-visibility LCD screen for real-time status updates and an intuitive interface on both the device and the app for simple setup and operation.
- Wide Outdoor Application Compatibility: Designed for standard 120V / 15A / 60Hz systems, suitable for pool pumps, pond lighting, automatic cleaners, garden fountains, and more.
Image: The Ortis Smart Pool Timer being controlled via the GeniLife app on a smartphone, demonstrating remote access and scheduling capabilities.
5. Setup
5.1 Physical Installation
- Choose a suitable outdoor location near your pool equipment or lights, ensuring it is protected from direct heavy rain and accessible to a GFCI outlet.
- Mount the timer securely using appropriate hardware (not included) if desired, or place it on a stable surface.
- Plug the Ortis Smart Pool Timer into a standard 120V GFCI outdoor outlet. The LCD screen should illuminate.
- Connect your pool pump, filter, or landscape lights to the S1 and S2 outlets on the timer. Ensure the total load does not exceed 15A.
Image: The Ortis Smart Pool Timer connected to a pool pump and a salt chlorinator, illustrating its dual outlet capability for multi-device control.
5.2 App Download and Pairing
- Download the GeniLife APP from the Apple App Store or Google Play Store.
- Register for a new account or log in if you already have one.
- Ensure your smartphone is connected to a 2.4GHz or 5GHz WiFi network.
- In the GeniLife APP, tap the "+" icon to add a new device.
- Follow the on-screen instructions to put the timer into pairing mode (usually by pressing and holding a button on the device until an indicator light flashes).
- Select your WiFi network and enter the password when prompted in the app.
- Once successfully paired, you can rename the device and assign it to a specific room for easier management.
6. Operating Instructions
6.1 Manual Control
- The device has physical buttons for manual override. Refer to the labels on the timer for specific button functions (e.g., ON/OFF, Mode, Set).
- Pressing the ON/OFF button will manually toggle the power for the connected outlets.
6.2 App Control and Scheduling
The GeniLife APP provides comprehensive control and scheduling options:
- Remote ON/OFF: From the app's main screen, you can individually turn Outlet S1 and S2 on or off.
- Daily Cycle Mode: Set specific times for the outlets to turn on and off each day.
- Countdown Mode: Set a timer for the outlets to turn on or off after a specified duration.
- Timer Cycle Mode: Configure repeating on/off cycles for specific periods.
- Weekly Timer Schedule: Create detailed schedules for different days of the week.
- Child Lock: Activate the child lock feature in the app to prevent unauthorized manual operation of the device.
Image: Screenshots of the GeniLife app interface, showing various scheduling options like daily cycles, countdowns, and timer cycles for personalized control.
Image: Close-up of the timer's LCD screen, displaying current time and operational status.
7. Maintenance
- Cleaning: Periodically wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is unplugged before cleaning.
- Outlet Covers: Always ensure the waterproof outlet covers are securely closed when not in use to protect against moisture and debris.
- Connection Check: Regularly inspect the power cord and appliance plugs for any signs of damage or wear. Ensure all connections are tight and secure.
- Environmental Protection: While designed for outdoor use, avoid prolonged exposure to extreme weather conditions.
Image: Close-up of the waterproof outlet covers on the Ortis Smart Pool Timer, highlighting their protective design.
8. Troubleshooting
- Device Not Powering On:
- Ensure the timer is securely plugged into a working GFCI outlet.
- Check if the GFCI outlet has tripped. Reset if necessary.
- Verify the power cord is not damaged.
- Cannot Connect to WiFi / App:
- Ensure your WiFi network is 2.4GHz or 5GHz.
- Verify your WiFi password is correct.
- Move the timer closer to your WiFi router.
- Restart your router and the timer, then try pairing again.
- Ensure Bluetooth is enabled on your phone during the pairing process (if applicable for quick pairing).
- Schedules Not Working:
- Check the app to ensure schedules are correctly set and enabled.
- Verify the device is connected to WiFi and has a stable internet connection.
- Ensure the device's internal clock is synchronized (usually automatic via app).
- Outlets Not Responding:
- Check if the connected appliance is working correctly when plugged directly into a wall outlet.
- Ensure the total load connected to the timer does not exceed 15A.
- Try manually toggling the outlets using the device buttons.
9. Specifications
| Brand | Ortis |
| Model Number | KJ-137 |
| Product Dimensions (D x W x H) | 3.9" x 3.3" x 4.9" |
| Electrical Rating | 120V / 15A / 60Hz |
| Max Load | 1800W (Total for both outlets) |
| Connectivity | WiFi (2.4GHz & 5GHz compatible) |
| App Control | GeniLife APP |
| Outlets | Dual, Independently Controlled |
| Color | Yellow |
Image: Diagram showing the physical dimensions of the Ortis Smart Pool Timer in inches.
10. Warranty and Support
Ortis products are designed for reliability and performance. For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or further assistance, please reach out to the manufacturer or seller through your purchase platform.
