ROMP Jiggle Thrusting Vibrator User Manual

Introduction

The ROMP Jiggle is a powerful thrusting vibrator designed for versatile use. It features a unique reciprocating motion, multiple intensity levels, and a strong suction cup for hands-free operation. Made from body-safe silicone, it is rechargeable and splash-resistant, offering a customizable and enjoyable experience.

Package Contents

• ROMP Jiggle Thrusting Vibrator
• USB Charging Cable
• Suction Cup Base
• User Manual

Product Overview

Familiarize yourself with the main components of your ROMP Jiggle device.

Image: Product diagram highlighting the vibrating head, textured ridges, control buttons (+/-), and USB charging port.

• Vibrating Head: Provides internal stimulation.
• Textured Ridges: Designed for enhanced sensation during thrusting motion.
• Control Buttons (+/-): Used to power on/off, adjust intensity, and change modes.
• USB Charging Port: Located at the base for recharging the device.
• Suction Cup Attachment Point: Connects the device to the suction cup base.

Setup and Charging

Initial Charge

Before first use, fully charge your ROMP Jiggle. The device comes with a USB charging cable.

1. Locate the charging port at the base of the device.
2. Connect the USB charging cable to the device and a compatible USB power source (e.g., computer, USB wall adapter).
3. A full charge takes approximately 30 minutes and provides up to 90 minutes of use.

Image: Connecting the USB charging cable to the device's base.

Attaching the Suction Cup Base

The suction cup base allows for hands-free use on smooth, flat surfaces.

1. Align the threaded end of the suction cup base with the attachment point at the bottom of the vibrator.
2. Gently screw the base onto the vibrator until secure. Do not overtighten.
3. To attach to a surface, press the suction cup firmly onto a clean, smooth, non-porous surface (e.g., tile, glass, mirror).
4. Flip the lever on the suction cup base down to create a vacuum seal.
5. To adjust the angle, loosen the knob on the suction cup base, position the vibrator as desired, and then tighten the knob to secure the angle.
6. To remove, lift the lever on the suction cup base to release the vacuum, then gently pull the base off the surface.

Image: Detail of the suction cup base attached to the vibrator.

Operating Instructions

Power On/Off

• To turn on: Press and hold the + button for 3 seconds.
• To turn off: Press and hold the - button for 3 seconds.

Adjusting Modes and Intensity

The ROMP Jiggle offers 6 thrusting intensities and 4 dynamic thrusting modes.

• Changing Intensity: While the device is on, press the + button to increase intensity or the - button to decrease intensity.
• Changing Modes: Press the power button (often integrated with the + button, refer to the product diagram) to cycle through the 4 dynamic thrusting modes.
• The device may also offer separate vibration functions. Consult the product diagram for specific controls if available.

Image: Overview of the ROMP Jiggle's features, including powerful thrusting, strong suction cup, IPX6 splash resistance, and USB rechargeability.

Maintenance and Care

Cleaning

The ROMP Jiggle is IPX6 splash-resistant, making it easy to clean. It is not designed to be fully submerged in water.

1. After each use, wash the device with warm water and a mild, toy-safe soap.
2. Rinse thoroughly to remove all soap residue.
3. Dry completely with a lint-free cloth before storing.
4. Avoid using harsh chemicals, alcohol-based cleaners, or petroleum-based lubricants, as these can damage the silicone material.

Image: Demonstrating the IPX6 splash-resistant feature of the ROMP Jiggle.

Storage

Store your ROMP Jiggle in a clean, dry place away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent damage or degradation of the silicone.

Troubleshooting

• Device not turning on: Ensure the device is fully charged. Connect it to the charger and wait for the charging indicator (if any) to confirm it's receiving power.
• Weak thrusting/vibration: The battery might be low. Recharge the device.
• Suction cup not adhering: Ensure the surface is clean, smooth, and dry. Press firmly and engage the lever. Avoid porous or textured surfaces.
• If you experience any other issues, please refer to the manufacturer's website or contact customer support.

Specifications

Warranty and Support

For warranty information, product registration, or technical support, please visit the official ROMP website or contact their customer service department. Keep your proof of purchase for any warranty claims.