1. Introduction
The Ecoviva E8 800 GPD Reverse Osmosis (RO) Water Filter System provides advanced 9-stage filtration for purified water directly from your tap. This tankless system is designed for under-sink installation, offering high-speed water delivery and real-time water quality monitoring through its smart faucet. It effectively reduces Total Dissolved Solids (TDS) and other impurities, ensuring clean and safe drinking water for your household.
Key Features:
- 9-Stage Filtration: Comprehensive purification process.
- 800 GPD High Flow: Delivers up to 800 gallons per day for instant, on-demand water.
- Tankless Design: Saves space and prevents secondary contamination.
- Smart Faucet: Features a real-time TDS display and filter life indicator.
- Efficient Water Usage: 2.5:1 pure-to-drain ratio minimizes water waste.
- Certified Purity: Independently tested and certified to meet NSF/ANSI 42, 58 standards for reducing various impurities.
Image: The Ecoviva E8 system installed under a kitchen sink, providing purified water to a family.
Safety Information:
- Read all instructions carefully before installation and use.
- Ensure all connections are secure to prevent leaks.
- The system requires an electrical outlet. Ensure proper grounding and avoid overloading circuits.
- Do not install the system where it may be exposed to freezing temperatures.
- Use only genuine Ecoviva replacement filters to maintain performance and warranty.
2. Setup and Installation
This section provides detailed instructions for installing your Ecoviva E8 RO system. Professional installation is recommended if you are not comfortable with plumbing or drilling.
Before You Begin:
- Space Requirements: Ensure a minimum clearance of 12.2" (H) x 5.0" (W) x 16.54" (L) under your sink. Leave 2-4 inches around pipe connections for maintenance.
- Electrical Outlet: An under-sink power outlet (AC110-120V/60Hz 85W) is required.
- Water Supply: Connects to municipal tap water.
- Countertop Hole: A 24-35mm hole is required for the dedicated smart faucet. A drilling guide sticker is included.
- Included Components: Verify all parts are present: RO System (with pre-installed PPC and RO filters), Smart Faucet, Installation Kit (tubing, fittings), User Manual.
Image: Compact design of the Ecoviva E8 system under a sink, highlighting its dimensions and electrical requirement.
Installation Steps:
- Prepare the Faucet Hole: If a hole is not present, drill a 24-35mm hole in your countertop or sink for the smart faucet.
- Install the Smart Faucet: Insert the faucet into the drilled hole and secure it from underneath the sink using the provided hardware. Connect the water lines and electrical cable from the faucet to the main RO unit.
- Connect Water Supply: Turn off the cold water supply. Install the provided T-adapter to your cold water line and connect the system's input water line (usually blue) to the T-adapter.
- Connect Drain Line: Attach the drain saddle to the drain pipe under your sink. Connect the system's drain line (usually red) to the drain saddle.
- Place the RO Unit: Position the Ecoviva E8 unit under the sink, ensuring it is level and has adequate clearance.
- Connect Power: Plug the RO system into a grounded electrical outlet.
- Initial Flush: Turn on the cold water supply. Open the smart faucet and let the water run for approximately 30 minutes to flush the system and new filters. This removes air and carbon fines.
Video: Official installation guide for the Ecoviva E6 & E8 RO System, demonstrating the setup process.
Video: An installation video demonstrating the setup of the Ecoviva RO system.
3. Operating Instructions
The Ecoviva E8 system is designed for simple operation, providing purified water on demand.
Dispensing Water:
- Simply turn the handle on the smart faucet to dispense purified water.
- The system delivers water at a high flow rate of up to 0.53 gallons per minute (GPM), filling containers quickly.
Image: The smart faucet demonstrating its high flow rate by filling various containers rapidly.
Smart Faucet Display:
The integrated LED smart faucet provides real-time information about your water quality and filter status.
- Real-Time TDS Monitor: The display shows the current TDS (Total Dissolved Solids) level of the filtered water. A lower TDS reading indicates higher water purity.
- Filter Life Reminder: The faucet will indicate the status of your PPC and RO filters, reminding you when it's time for replacement.
Image: The smart faucet's display showing real-time TDS levels and filter life status.
4. Maintenance
Regular maintenance, primarily filter replacement, ensures optimal performance and water quality from your Ecoviva E8 system.
Filter Replacement:
The Ecoviva E8 uses two main filters: the PPC (Pre-Carbon Block & PP Cotton) filter and the RO (Reverse Osmosis Membrane & Carbon Block & PP Cotton) filter. The smart faucet will indicate when replacement is needed.
- PPC Filter Life: Approximately 12 months.
- RO Filter Life: Approximately 24 months.
Image: Ecoviva PPC and RO filters with their respective lifespans.
Steps for Filter Replacement:
- Turn off the water supply to the RO system.
- Unplug the power cord from the electrical outlet.
- Locate the filter(s) to be replaced. The filters are designed for tool-free replacement.
- Twist the old filter counter-clockwise and pull it out.
- Insert the new filter, aligning it correctly, and twist clockwise until it locks into place.
- Plug in the power cord and turn on the water supply.
- Flush the new filter by running water from the smart faucet for 5-10 minutes.
Image: Simple filter replacement process, showing a hand twisting out a filter.
Self-Cleaning Feature:
The Ecoviva E8 system includes an automatic self-cleaning function to maintain optimal membrane performance and extend filter life.
5. Troubleshooting
This section addresses common issues you might encounter with your Ecoviva E8 RO system. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No water from faucet | Water supply off, power off, clogged filters, faucet not connected properly. | Check water supply valve. Ensure unit is plugged in. Check filter status on smart faucet and replace if needed. Ensure smart faucet is securely connected to the main unit. |
| Low water flow | Clogged filters, low incoming water pressure. | Replace filters. Ensure adequate incoming water pressure (refer to specifications). |
| High TDS reading | RO filter needs replacement, system not flushed properly. | Check RO filter status on smart faucet and replace if indicated. Ensure initial flush was completed for 30 minutes. |
| Leakage | Loose connections, damaged O-rings or tubing. | Tighten all connections. Inspect O-rings and tubing for damage and replace if necessary. |
| System not making water (faucet feedback needed) | Smart faucet not properly connected or communicating with the main unit. | Ensure the smart faucet's electronic connection to the main unit is secure. The system requires electronic feedback from the spigot to operate. |
Image: FAQ section providing answers to common product inquiries.
6. Specifications
Detailed technical specifications for the Ecoviva E8 800 GPD Reverse Osmosis Water Filter System.
| Feature | Specification |
|---|---|
| Model Number | E8 |
| Filtration Stages | 9-Stage |
| RO Membrane Accuracy | 0.0001 µm |
| Daily Production Capacity | 800 GPD (Gallons Per Day) |
| Maximum Flow Rate | 0.53 GPM (Gallons Per Minute) |
| Pure to Drain Ratio | 2.5:1 |
| Product Dimensions (L x W x H) | 16.54" x 5.00" x 12.20" |
| System Weight | 18.3 pounds |
| Power Source | Corded Electric AC110-120V/60Hz 85W |
| Installation Type | Under Sink |
| PPC Filter Life Cycle | 12 months |
| RO Filter Life Cycle | 24 months |
| Supported Water TDS Level Maximum | 900 PPM |
| Operating Temperature Range | 41 °F - 100.4 °F (5 °C - 38 °C) |
| Included Components | RO System (pre-installed RO & PPC filter), Faucet, Installation Kit, User Manual |
Image: Diagram of the 9-stage filtration process, highlighting the RO membrane.
Image: SGS test report confirming the system's compliance with NSF/ANSI standards for impurity reduction. For the full report, visit SGS Online.
7. Warranty and Support
Ecoviva is committed to providing reliable products and excellent customer service.
Warranty Information:
The Ecoviva E8 tankless reverse osmosis water filter comes with a 5-year warranty for the machine (excluding filters and mineralization media). This warranty covers manufacturing defects and malfunctions under normal use.
Customer Support:
For any product problems, technical assistance, or questions regarding filter replacements, please contact Ecoviva customer support. A solution will be provided within 24 hours.
- Support Channels: Email, Online Chat, Apps Online Chat.
- Supported Languages: English.
- Hours of Operation: Weekdays 9:00 AM - 6:00 PM EST.
- Repair Center: 181 Solstice Drive, Haw River, NC 27258, United States.
Image: Ecoviva customer support team and available contact methods.
