Helidirect YX-F112S

Helidirect Yu Xiang F112S AH-1 Cobra RC Helicopter User Manual

Model: YX-F112S

1. Introduction

Thank you for choosing the Helidirect Yu Xiang F112S AH-1 Cobra 1:40 Scale Electric RC Helicopter. This model features a highly realistic AH-1 Cobra design, equipped with advanced flight technology for stable and precise control. It is designed for both adult and beginner pilots, offering an immersive flying experience with its intelligent flight system.

Key features include a flybarless dual brushless power system, GPS and LiDAR intelligent flight capabilities, wind-resistant metal-gear servos, and an 8-channel transmitter with real-time telemetry. The helicopter is constructed from durable carbon fiber and nylon, ensuring a robust and crash-resistant structure.

2. Package Contents

Please verify that all items listed below are included in your package:

  • 1 x Helidirect Yu Xiang F112S AH-1 Cobra RC Helicopter
  • 1 x 8-Channel 2.4G Transmitter (Remote Control)
  • 1 x 7.4V 1200mAh LiPo Battery
  • 1 x USB Charging Cable
  • 1 x User Manual (This Document)
  • 2 x Main Blades (Spare)
  • 1 x Tail Blade (Spare)

3. Setup

3.1. Battery Charging

The helicopter is powered by a 7.4V 1200mAh 25C LiPo battery. Before first use, fully charge the battery using the provided USB charging cable. The charging time is approximately 60 minutes. The smart battery includes overcharge and low-voltage protection. Use a compatible Type-C charger (not included) for optimal charging.

3.2. Transmitter Preparation

Insert the required batteries (not included) into the 8-channel 2.4G transmitter. Ensure correct polarity. The transmitter provides 1024-level precision control and displays real-time flight telemetry such as battery status, height, and speed.

3.3. Initial Assembly

Some minor assembly may be required. Carefully attach any loose components such as main blades or tail blades if they are not pre-installed. Refer to the diagrams in this manual for guidance.

4. Operating Instructions

4.1. Power On and Pairing

  1. Ensure the helicopter battery is fully charged and securely installed.
  2. Turn on the helicopter's power switch.
  3. Turn on the transmitter. The transmitter and helicopter should automatically pair. Wait for the indicator lights to confirm a successful connection.

4.2. Flight Modes

The F112S features a smart flight controller with multiple modes:

  • GPS Mode: Utilizes GPS positioning for enhanced stability and precise hovering.
  • Vision Mode (Optical Flow): Uses optical flow sensors for stable and accurate hovering, especially in indoor environments or areas with limited GPS signal.
  • Manual Mode: Provides full manual control for experienced pilots.

Refer to your transmitter's specific controls for switching between these modes.

4.3. Smart Flight Features

The intelligent flight system includes several safety and convenience features:

  • One-Button Return: Initiates an automatic return to the takeoff point.
  • Geofence: Establishes virtual boundaries to prevent the helicopter from flying out of a designated area.
  • Auto-Routes: Allows for pre-programmed flight paths.
  • Low Battery Return: The helicopter will automatically return when the battery level is critically low.
  • Signal Loss Return: The helicopter will return to its takeoff point if the signal from the transmitter is lost.

4.4. Flight Duration

Expect a flight time of approximately 10-12 minutes on a full charge, depending on flight conditions and maneuvers.

5. Maintenance

5.1. Cleaning

Regularly clean the helicopter's fuselage and rotor blades with a soft, dry cloth. Avoid using harsh chemicals or solvents that could damage the material or electronics.

5.2. Blade Inspection

Before each flight, inspect the main and tail blades for any signs of damage, cracks, or deformities. Replace damaged blades immediately to ensure safe and stable flight. Spare blades are included in your package.

5.3. Battery Care

Store the LiPo battery in a cool, dry place away from direct sunlight and extreme temperatures. Do not overcharge or over-discharge the battery. If the helicopter will not be used for an extended period, charge the battery to approximately 50% capacity before storage.

6. Troubleshooting

  • Helicopter does not power on: Ensure the battery is fully charged and correctly inserted. Check the power switch on both the helicopter and the transmitter.
  • Helicopter does not respond to controls: Verify that the transmitter and helicopter are properly paired. Check the transmitter batteries. Ensure there are no strong interference sources nearby.
  • Unstable flight: Perform a calibration if available (refer to transmitter instructions). Check for damaged or bent rotor blades. Ensure flight is conducted in calm conditions, as the helicopter is designed to work in 4-5 wind but extreme conditions can affect stability.
  • Short flight time: Ensure the battery is fully charged. Flight time can vary based on aggressive flying or strong winds.

7. Specifications

FeatureDetail
ModelYX-F112S
Scale1:40 Scale AH-1 Cobra
Rotor Diameter375mm
Fuselage Length440mm
Height150mm
Control Mode2.4G, 8-Channel
Max Control Range300M
MaterialHigh-strength composite material (Nylon + Carbon Fiber)
Helicopter Battery7.4V/1200mAh/25C LiPo
Charging TimeApproximately 60 minutes
Flight Time10-12 minutes
MotorsDual Brushless (Main & Tail)
Servos3 x 4.3g Metal-Gear Servos
Flight SystemGPS + LiDAR Intelligent Flight System, Optical Flow Positioning
Age Recommendation15+ years
Usage EnvironmentOutdoor

8. Safety Guidelines

  • This product is intended for users aged 15 years and older.
  • Always operate the helicopter in open outdoor areas, away from people, animals, buildings, and power lines.
  • Do not fly in strong winds, rain, or other adverse weather conditions.
  • Keep fingers and loose clothing away from rotating blades.
  • Never attempt to modify or disassemble the helicopter or its components.
  • Ensure the battery is handled with care, following all charging and storage instructions to prevent damage or injury.

9. Product Images

Side view of the Helidirect Yu Xiang F112S AH-1 Cobra RC helicopter in green.

Figure 1: Side view of the Helidirect Yu Xiang F112S AH-1 Cobra RC helicopter, showcasing its detailed military green fuselage.

Rear-side view of the Helidirect Yu Xiang F112S AH-1 Cobra RC helicopter, highlighting the tail rotor and landing skids.

Figure 2: Rear-side perspective of the AH-1 Cobra RC helicopter, showing the tail section and overall structure.

Front view of the Helidirect Yu Xiang F112S AH-1 Cobra RC helicopter, featuring the cockpit and distinctive shark mouth decal.

Figure 3: Front view of the AH-1 Cobra RC helicopter, emphasizing the detailed cockpit and nose art.

Helidirect Yu Xiang F112S AH-1 Cobra RC helicopter resting on a surface, viewed from the front.

Figure 4: The AH-1 Cobra RC helicopter in a static display, showing its compact size and design.

Helidirect Yu Xiang F112S AH-1 Cobra RC helicopter in stable flight against a blurred outdoor background.

Figure 5: The AH-1 Cobra RC helicopter demonstrating its flight capabilities outdoors.

10. Product Videos

No official seller videos directly relevant to the Helidirect Yu Xiang F112S AH-1 Cobra model were found in the provided data.

© 2026 Helidirect. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.