Introduction
The XIAOMI Redmi Watch 6 NFC is a versatile smartwatch designed to enhance your daily life with advanced health monitoring, extensive sport tracking, and convenient smart features. This manual provides essential information for setting up, operating, and maintaining your device.
- Crystal Clear AMOLED Display: Features a 2.07-inch AMOLED display with ultra-thin 2mm bezels, offering high brightness for excellent outdoor clarity.
- Slim and Durable Design: An ultra-thin 9.9mm body with a high-quality aluminum alloy frame provides a perfect balance of lightness and durability.
- Extended Battery Life: Equipped with a 550mAh high-capacity battery, providing up to 24 days of battery life with moderate use.
- NFC for Payments: Supports NFC for convenient contactless payments.
- Precise GPS Tracking: Features dual L1 5-system GNSS with a high-precision chip for accurate outdoor activity tracking.
What's in the Box
Upon unboxing your XIAOMI Redmi Watch 6 NFC, please ensure all the following items are present:
- XIAOMI Redmi Watch 6 NFC Smartwatch
- Magnetic Charging Cable
- User Manual (including warranty notice)
Setup
1. Initial Charging
Before first use, fully charge your Redmi Watch 6 NFC. Connect the magnetic charging cable to the charging contacts on the back of the watch and plug the USB end into a power adapter (not included) or a computer's USB port.
2. Pairing with Your Smartphone
- Download the Mi Fitness app from the Google Play Store (for Android devices) or the Apple App Store (for iOS devices).
- Open the Mi Fitness app and follow the on-screen instructions to create an account or log in.
- Tap 'Device' and then 'Add device' or the '+' icon to search for your Redmi Watch 6 NFC.
- Select your watch from the list of nearby devices.
- Confirm the pairing request on both your phone and the watch.
3. Basic Navigation
The Redmi Watch 6 NFC features a touchscreen display and two physical buttons for navigation:
- Touchscreen: Swipe up, down, left, or right to navigate through menus and notifications. Tap to select items.
- Primary Button (Crown): Typically used to return to the home screen or access the app list. Rotate for scrolling.
- Secondary Button: Press once to access the control center. Press and hold to access the power off/restart menu. Press three times to call an emergency contact (requires Mi Fitness app to be updated and SOS emergency enabled).
Image: Two-button navigation for precise control. Shows how to use the secondary button for control center, power menu, and emergency calls.
Operating Instructions
Display and Watch Faces
The 2.07-inch AMOLED display offers vibrant colors and deep blacks. You can customize your watch face from a wide collection available in the Mi Fitness app. The watch also supports an always-on display feature, allowing you to check the time at a glance without activating the screen (this feature must be manually enabled in watch settings).
Image: Wide collection of customizable watch faces.
Notifications
Receive notifications from your smartphone directly on your watch. Manage which app notifications appear on your watch through the Mi Fitness app settings.
Multi-Device Ecosystem Connectivity
The Redmi Watch 6 NFC, powered by Xiaomi HyperOS, allows you to manage smart home devices directly from your wrist, offering enhanced convenience and efficiency.
Image: Multi-device ecosystem connectivity, showing smart home controls on the watch.
Health Monitoring Features
The Redmi Watch 6 NFC provides comprehensive health tracking capabilities:
- All-Day Heart Rate Monitoring: Supports automatic detection and provides alerts for abnormal heart rates.
- Continuous Sleep Monitoring: High-precision sleep tracking and analysis.
- All-Day Stress Monitoring: Monitors stress levels throughout the day.
- Blood Oxygen Saturation (SpO2) Monitoring: Supports all-day SpO2 monitoring with vibration alerts if levels are too low.
- Breathing Exercises: Offers four breathing techniques for dynamic relaxation.
- Female Health Management: Provides reminders and assistance for menstrual cycles.
Image: Multiple modes for complete health attention.
Sport Modes
The Redmi Watch 6 NFC supports over 150 sport modes with accurate recording. Advanced algorithms precisely monitor running, cycling, hiking, and other activities, detecting heart rate and energy consumption in real-time to ensure every effort is accurately recorded.
Image: Over 150 sport modes with accurate professional recording.
NFC Payments
The Redmi Watch 6 NFC supports multifunctional NFC for contactless and cashless payments. Simply bring your watch close to a compatible payment terminal.
Setting up Xiaomi Pay
To use NFC payments, you need to set up Xiaomi Pay through the Mi Fitness app. Follow these general steps:
- Open the Mi Fitness app and navigate to the 'Device' section.
- Find and tap 'Xiaomi Pay'.
- Follow the prompts to add your credit or debit card. You may need to verify your identity with your bank.
- Set a password for your watch if prompted.
- Once activated, your card will be ready for use.
Image: How to configure Xiaomi Pay on your watch.
Important Note on NFC Compatibility: NFC functionality requires a wireless service plan and may be subject to regional restrictions. Cashless payments with NFC are only accepted at payment terminals supporting Mastercard® and Visa®. The availability of Mastercard® and Visa® payments, as well as NFC functionality, may vary by region. For more details, visit www.mi.com/global/support/nfc-bank and contact your card issuer for further information.
Image: NFC bank compatibility table.
Battery Life
The Redmi Watch 6 NFC is equipped with a 550mAh battery, providing excellent endurance:
- Up to 24 days with light use.
- Up to 12 days with normal use.
- Up to 7 days with intense use.
Image: Stay charged, stay connected. Illustrates battery duration for different usage levels.
GPS Functionality
The watch features integrated GPS with dual L1 antenna positioning and a high-precision GNSS chip. This ensures stable signal reception and impeccable localization accuracy, allowing for precise tracking of your outdoor movements even in complex terrains.
Image: Updated dual L1 antenna positioning for enhanced accuracy.
Image: Independent GNSS for outdoor running, monitoring every run with precision.
Maintenance
Water Resistance
The Redmi Watch 6 NFC has a water resistance rating of 5ATM, meaning it can withstand pressures equivalent to a depth of 50 meters. It is suitable for swimming in pools, shallow-water swimming, and other water activities in shallow areas. It is not suitable for use in hot showers, saunas, or deep diving. Avoid direct exposure to high-speed water streams during water sports. The water resistance function is not permanent and may deteriorate over time.
Cleaning
Regularly clean your watch and strap to prevent skin irritation and maintain device performance. Use a soft, damp cloth to wipe the watch. Avoid using harsh chemicals or abrasive materials. Ensure the watch is dry before charging.
Charging
Always use the provided magnetic charging cable. Ensure the charging contacts on the watch and cable are clean and dry before charging to prevent corrosion or damage.
Troubleshooting
- Watch not turning on: Ensure the watch is fully charged. Connect it to the charger for at least 30 minutes.
- Cannot pair with phone: Ensure Bluetooth is enabled on your phone and the watch is within range. Restart both your phone and watch. Try unpairing and re-pairing through the Mi Fitness app.
- NFC payments not working: Verify that your bank and card are supported by Xiaomi Pay in your region. Refer to the official Xiaomi NFC bank compatibility list. Some users have reported success using third-party services like Curve for broader compatibility. Ensure the Mi Fitness app is updated and NFC is enabled on your watch.
- Inaccurate health data: Ensure the watch is worn correctly, snug but not too tight, on your wrist. Keep the sensor area clean.
- Short battery life: Check if features like always-on display, continuous heart rate monitoring, or frequent GPS usage are enabled. Adjust settings in the Mi Fitness app to optimize battery consumption.
Specifications
| Feature | Specification |
|---|---|
| Model Name | Redmi Watch 6 |
| Model Number | M2560W1 |
| Display | 2.07-inch AMOLED |
| Operating System | Xiaomi HyperOS 3.0 |
| Battery Capacity | 550 mAh (Lithium-ion) |
| Typical Battery Life | Up to 12 days (normal use) |
| Connectivity | Bluetooth, NFC |
| GPS | Integrated GPS (Dual L1) |
| Water Resistance | 5ATM (50 meters) |
| Memory (Storage) | 512 MB |
| RAM | 32 MB |
| Case Material | Aluminum |
| Band Material | TPU (Thermoplastic Polyurethane) |
| Compatible Devices | Android Devices, iOS Devices |
| Dimensions | 10 x 10 x 6.5 cm |
| Country of Origin | China |
Warranty and Support
Warranty Information
The XIAOMI Redmi Watch 6 NFC comes with a 2-year manufacturer's warranty. Please refer to the warranty notice included in your product packaging for detailed terms and conditions.
Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact XIAOMI customer support through their official website or the contact information provided in your warranty documentation. You can also refer to the Mi Fitness app for additional help and FAQs.