1. Product Overview
The MixBubole 1500W Macerator Pump FLO1200-BGS PRO is designed to pump wastewater from conventional toilets with a bottom outlet, as well as other fixtures like sinks, bathtubs, showers, and laundry machines, in locations where gravity drainage is not feasible. This pump features a powerful motor, efficient grinding blades, and smart control for reliable operation.
Image 1.1: Overview of the MixBubole Macerator Pump and its applications.
2. Important Safety Information
- Compatibility: This macerator pump is suitable for conventional toilets with a bottom outlet ONLY. It is NOT suitable for rear discharge toilets. Using it with an incompatible toilet type may lead to malfunction or damage.
- Electrical Safety: Always disconnect the power supply before attempting any installation, maintenance, or troubleshooting. Ensure the pump is properly grounded according to local electrical codes.
- Water Temperature: Do not exceed continuous water temperatures of 60°C (140°F). The pump can handle up to 90°C (194°F) for a maximum of 4 hours.
- Installation: Installation should be performed by a qualified professional or in accordance with local plumbing and electrical regulations.
- Foreign Objects: Avoid flushing large, hard, or non-biodegradable objects that could damage the grinding blades or clog the pump.
Image 2.1: Important note on toilet compatibility for the macerator pump.
3. Product Features
- Powerful Motor: Equipped with a 1500W all-copper coil motor, operating at 110V-120V/60Hz with an 8000 RPM speed. Designed for quiet, robust, and long-term operation without overheating.
- Efficient Grinding: Features sharpened stainless steel grinding blades capable of cutting various waste materials, including sanitary napkins, condoms, cigarette butts, plastic film, towels, and wet wipes, to ensure smooth water flow.
- PCB Smart Control: Includes a time delay function to prevent frequent activation, contributing to quieter operation and energy efficiency.
- Versatile Connections: Designed with four 40mm universal wastewater inlets and two outlets, allowing connection to multiple fixtures such as toilets, bathtubs, basins, showers, and laundry facilities.
- Automatic Operation: Features a fully automatic ON/OFF mechanism, activating when the water level reaches 3 inches and shutting off at 2 inches. A manual button is provided for drainage tests.
- Enhanced Safety: The float switch is mounted above the water level to minimize the risk of electrical leakage and short circuits.
- Low Noise & Odor Control: Operates at approximately 45 dB for minimal disruption. A replaceable activated carbon module ensures an odor-free environment.
- Durable Construction: Crafted from premium PP material, resistant to aging and scratches, and easy to clean. IPX4 waterproof rating ensures durability in challenging conditions.
- Upgraded Design: Features an upgraded switch and internal structure for improved sealing performance, enhanced stability, extended lifespan, and reduced maintenance.
Image 3.1: All-copper motor and grinding blade details.
Image 3.2: PCB delay function and upgraded structure.
Image 3.3: Explanation of macerator function.
Image 3.4: Inlet/outlet design, hot water resistance, and IPX4 rating.
4. Package Contents
Verify that all items listed below are included in your package:
- FLO1200-BGS PRO Pump (1 unit)
- Hose Clamp (32-50mm) (5 units)
- Plastic Inlet Hose (5 units)
- Toilet Connection Rubber Ring (1 unit)
- Hose Clamp (40-60mm) (2 units)
- Activated Carbon (1 unit)
- Check Valve with Plastic Elbow (1 unit)
- Hose Clamp (110-120mm) (2 units)
- Plug (3 units)
- Front Lid (1 unit)
Image 4.1: Detailed view of all package contents.
5. Setup and Installation
The MixBubole macerator pump is designed for flexible installation in various spaces, including under basins. Ensure the installation adheres to all local plumbing and electrical codes.
5.1 Pre-Installation Checks
- Confirm the toilet is a conventional model with a bottom outlet.
- Ensure adequate space for the pump (L 15.7” x W 11.4” x H 7.5”).
- Verify power supply (110V-120V/60Hz) is available and properly grounded.
5.2 Connection Steps
- Toilet Connection: Connect the toilet outlet to the designated inlet on the macerator pump using the provided toilet connection rubber ring and appropriate hose clamps.
- Fixture Inlets: Connect other wastewater fixtures (sink, shower, washing machine) to the available 40mm universal inlets. Secure all connections with hose clamps.
- Discharge Outlet: Connect the pump's discharge outlet to the main sewage line. Ensure the check valve with plastic elbow is installed to prevent backflow. The pump offers multiple outlet diameter options (23, 25, 32, 38 mm) for flexibility.
- Venting: Ensure proper venting for the system. The pump includes a vent hole with an activated carbon filter for odor control.
- Electrical Connection: Once all plumbing connections are secure and leak-free, connect the pump to a grounded electrical outlet.
Image 5.1: Installation diagram showing options for pump placement.
Image 5.2: Examples of compact installation in various bathroom and utility settings.
6. Operation
The MixBubole macerator pump operates automatically based on water levels. Once installed and connected to power, it requires minimal user intervention.
- Automatic Activation: The pump will automatically turn ON when the water level inside the unit reaches approximately 3 inches.
- Automatic Deactivation: The pump will automatically turn OFF when the water level drops to approximately 2 inches, indicating successful drainage.
- Manual Test: A manual button is available on the unit to initiate a drainage cycle for testing purposes or to clear residual water.
- Waste Processing: The internal grinding blades will liquefy organic waste and toilet paper, along with other specified items, before pumping the slurry to the sewage system.
7. Maintenance
Regular maintenance ensures the longevity and efficient operation of your macerator pump.
- Cleaning: The pump's exterior is made from PP material, which is easy to clean. Use a damp cloth and mild detergent. Do not use abrasive cleaners.
- Activated Carbon Filter: The replaceable activated carbon module helps control odors. Check and replace this filter periodically, or if odors become noticeable.
- Inspection: Periodically inspect all connections for leaks and ensure hose clamps are secure. Check for any unusual noises or vibrations during operation.
- Professional Service: For internal component inspection or repair, it is recommended to contact a qualified service technician.
8. Troubleshooting
If you encounter issues with your MixBubole macerator pump, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not activate | No power supply Float switch stuck Motor issue | Check power connection and circuit breaker. Ensure float switch moves freely. Contact customer support. |
| Pump runs continuously | Float switch stuck in ON position Check valve malfunction Leak in discharge pipe | Check float switch for obstructions. Inspect or replace check valve. Inspect discharge piping for leaks. |
| Unusual noises or vibrations | Foreign object in grinding chamber Motor bearing wear | Disconnect power and carefully inspect grinding chamber (professional recommended). Contact customer support. |
| Water leakage | Loose connections Damaged seals or pipes | Tighten all hose clamps and connections. Inspect seals and pipes for damage and replace as needed. |
| Odor present | Activated carbon filter needs replacement Improper venting | Replace the activated carbon module. Ensure the vent system is clear and properly installed. |
If the problem persists after attempting these solutions, please contact MixBubole customer support for further assistance.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | FLO1200-BGS PRO |
| Power | 1500W |
| Voltage / Frequency | 110V-120V / 60Hz |
| Max. Flow Rate | 2800 GPH |
| Max. Vertical Lift | 32.8 ft |
| Max. Horizontal Discharge | 328 ft |
| Motor Speed | 8000 RPM |
| Dimensions (L x W x H) | 15.7 in x 11.4 in x 7.5 in |
| Inlet Diameter | 3 x 40mm |
| Toilet Inlet Diameter | 100mm |
| Outlet Diameter | 23, 25, 32, 38 mm (multiple options) |
| Noise Level | 45 dB |
| Waterproof Rating | IPX4 |
| Max. Continuous Water Temp. | 60°C (140°F) |
| Max. Intermittent Water Temp. | 90°C (194°F) for up to 4 hours |
Image 9.1: Product specifications summary.
10. Warranty and Support
The MixBubole 1500W Macerator Pump FLO1200-BGS PRO comes with a 1-Year Factory Service warranty.
For warranty claims, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official MixBubole website.
Image 10.1: Warranty information.
