DERCASS N708S00010 Queen Size Space-Saving Murphy Bed Instruction Manual

1. Introduction

Thank you for choosing the DERCASS N708S00010 Queen Size Space-Saving Murphy Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

Always follow assembly instructions precisely.
Assembly requires two adults. Do not attempt to assemble alone.
Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
Do not exceed the maximum weight capacity of 500 lbs.
Keep children and pets away from the bed during assembly and when folding/unfolding.
Use only the recommended mattress thickness of 4-6 inches.
Avoid placing heavy objects on the bed when it is in the upright (cabinet) position.

2. Package Contents

Your DERCASS Murphy Bed is shipped in two separate packages. Please ensure all components are present before beginning assembly. If any parts are missing or damaged, contact customer support immediately.

Included Components:

Bed Frame components
Slat base system (13 pieces)
Two large storage drawers
Cabinet doors with rattan finish
USB Charging Port assembly
All necessary hardware (screws, bolts, hinges, etc.)
Assembly Instruction Manual (this document)

3. Setup and Assembly

Assembly is required and should be performed by two adults. Please clear an adequate workspace and have the necessary tools ready (e.g., screwdriver, hammer, wrench).

Assembly Steps:

Unpack and Identify Parts: Carefully unpack all components from both packages. Lay them out and compare them against the parts list in the included detailed assembly manual to ensure everything is present and undamaged.
Assemble the Cabinet Frame: Begin by constructing the main cabinet frame. Follow the step-by-step diagrams in the detailed manual, ensuring all panels are correctly oriented and secured with the provided hardware.
Install the Bed Frame Mechanism: Attach the folding bed frame mechanism to the cabinet. This involves securing hinges and support arms. Pay close attention to the alignment to ensure smooth operation.
Attach the Slat Base: Once the bed frame is in place, install the 13 wooden slats onto the frame. Ensure they are evenly spaced and securely fastened to provide proper mattress support.
Assemble and Install Drawers: Construct the two large storage drawers. Insert the drawer slides into the cabinet and then slide the assembled drawers into place.
Install Cabinet Doors: Attach the decorative rattan-style cabinet doors to the front of the unit. Adjust hinges as needed for proper alignment and smooth closing.
Connect USB Charging Port: Locate the designated area for the USB charging port and install it according to the instructions. Ensure it is properly connected to a power source (if applicable, check detailed manual for power requirements).
Final Checks: Before first use, double-check all screws, bolts, and connections to ensure they are tight and secure. Test the folding mechanism several times to confirm smooth operation.

Visual Assembly Guide

**Figure 3.1:** Detailed dimensions of the DERCASS Murphy Bed in open and closed configurations, including drawer measurements. This image provides a comprehensive overview of the bed's size and the storage drawers' capacity.

**Figure 3.2:** The DERCASS Murphy Bed partially open, revealing the folding mechanism and one storage drawer extended. This illustrates the initial stage of unfolding the bed from its cabinet position.

**Figure 3.3:** The DERCASS Murphy Bed partially open, showcasing the slat base and the overall structural design. This view highlights the sturdy construction of the bed frame.

**Figure 3.4:** The DERCASS Murphy Bed fully extended and ready for use, showing the complete slat base. This is the sleeping configuration of the bed.

**Figure 3.5:** Side view of the DERCASS Murphy Bed fully extended, illustrating the support legs and overall length. This perspective helps visualize the bed's footprint when open.

**Figure 3.6:** The DERCASS Murphy Bed in its closed cabinet mode, featuring decorative rattan-style doors and two large storage drawers at the bottom. This shows the space-saving configuration.

**Figure 3.7:** The DERCASS Murphy Bed in a partially folded state, demonstrating the mechanism for lifting and securing the bed frame back into the cabinet. This illustrates the folding process.

4. Operating Instructions

Folding and Unfolding the Bed

To Unfold: Gently pull the bed frame downwards from the cabinet. The support legs will automatically extend. Ensure the bed is fully extended and stable before use.
To Fold: Remove any bedding and mattress. Lift the bed frame upwards, guiding the support legs to fold inward. Push the bed frame completely into the cabinet until it locks securely in place. Close the cabinet doors.

Using the Storage Drawers

The two large drawers located beneath the cabinet provide ample storage for pillows, blankets, clothes, or toys. Simply pull the handles to open and push to close. Ensure drawers are fully closed when folding the bed.

Using the USB Charging Port

The integrated USB charging port allows you to conveniently charge your electronic devices. Connect your device's USB cable to the port. Ensure the bed is connected to a power outlet for the USB port to function.

5. Maintenance

Cleaning

Wipe the wood surfaces with a dry cloth to remove dust and dirt.
For stubborn marks, use a slightly damp cloth with mild soap, then immediately wipe dry.
Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.

General Care

Periodically check all hardware connections and tighten if loose.
Ensure the folding mechanism operates smoothly. If it becomes stiff, apply a small amount of silicone-based lubricant to the moving parts.
Protect the bed from direct sunlight and extreme temperature changes to prevent warping or fading.

6. Troubleshooting

Bed Difficult to Fold/Unfold

Ensure no obstructions are present (e.g., bedding, items in drawers).
Check that all hinges and moving parts are clean and free of debris. Lubricate if necessary.
Verify that the bed frame is properly aligned within the cabinet.

Drawers Sticking

Check for any items obstructing the drawer slides.
Ensure the drawer slides are clean and free of dust.
Verify that the drawers were assembled correctly and are aligned with the slides.

USB Port Not Charging

Confirm that the bed's power cord is securely plugged into a working wall outlet.
Try a different USB cable or device to rule out cable/device issues.
Check the connection of the USB port assembly within the bed frame.

7. Specifications

Product Type	Murphy Bed
Size	Queen
Model Number	N708S00010
Overall Product Dimensions (Open)	80.6" L x 63" W x 41.3" H
Overall Product Weight	195.4 lbs
Weight Capacity	500 lbs
Recommended Mattress Thickness	4" - 6"
Material	Plywood, MDF, Pinewood
Number of Slats	13
Number of Drawers	2
Special Features	Foldable, Large Drawers, USB Charging Port, No Box Spring Needed
Assembly Required	Yes
Care Instructions	Wipe with Dry Cloth

8. Warranty and Support

Manufacturer's Warranty

This DERCASS Murphy Bed comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing or damaged parts, please contact DERCASS customer support. Have your model number (N708S00010) and purchase information ready when you call or email.

Contact Information:
Email: support@dercass.com
Phone: [Insert Customer Service Phone Number Here]