OEDRO Running Boards Instruction Manual

1. Introduction and Overview

Thank you for choosing OEDRO Running Boards. This manual provides essential information for the proper installation, operation, and maintenance of your new running boards. Please read these instructions thoroughly before beginning installation to ensure a safe and successful setup.

These running boards are custom-designed for the following vehicle models:

• 2009-2018 RAM 1500 Crew Cab
• 2010-2026 RAM 2500 3500 Crew Cab
• 2019-2024 RAM 1500 Classic Crew Cab

The OEDRO running boards feature an extended 85.7-inch length and a triple convex platform design, providing easy access to the vehicle's cab, roof, and truck bed. They are constructed from heavy-duty carbon steel with a corrosion-resistant powder coating, designed to support up to 550 lbs per side without flexing. The perforated step plates offer a non-slip surface for enhanced grip in various weather conditions.

Image: Compatibility chart illustrating compatible RAM truck models (2009-2018 RAM 1500, 2010-2026 RAM 2500/3500, 2019-2024 RAM 1500 Classic Crew Cab).

2. Safety Information

Always prioritize safety during installation and use. Failure to follow these safety guidelines may result in injury or damage to your vehicle.

• Read all instructions: Ensure you understand each step before proceeding with installation.
• Use appropriate tools: Employ the correct tools for the job to prevent damage to components or injury.
• Securely fasten all hardware: Loose hardware can lead to product failure and potential hazards. Periodically check all bolts and nuts for tightness.
• Do not exceed weight limit: The running boards are designed to support up to 550 lbs per side. Exceeding this limit can cause damage or failure.
• Inspect regularly: Check for any signs of wear, damage, or corrosion, especially after off-road use or exposure to harsh weather.
• Professional installation recommended: If you are unsure about any step, seek assistance from a qualified professional.

3. Package Contents

Please verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact OEDRO customer support immediately.

• 2 x Nerf Bars (Running Boards)
• 1 x Set of Brackets
• 1 x Installation Instructions (this manual)
• All necessary hardware (bolts, nuts, washers, etc.)

4. Setup and Installation

Installation typically requires basic hand tools and can be completed without drilling, utilizing existing factory mounting points on your vehicle. It is recommended to have a second person assist with the installation due to the size and weight of the running boards.

4.1 Pre-Installation Steps

1. Inspect Components: Unpack all items and compare them against the package contents list. Check for any manufacturing defects or shipping damage.
2. Clean Mounting Area: Ensure the vehicle's frame and rocker panel areas where the brackets will attach are clean and free of debris.
3. Identify Mounting Points: Locate the pre-drilled holes on your vehicle's frame. These are typically found along the rocker panel beneath the doors.

4.2 Installation Procedure

1. Attach Brackets: Secure the mounting brackets to the vehicle's frame using the provided hardware. Do not fully tighten the bolts at this stage to allow for adjustment. The pre-drilled holes on the brackets should align perfectly with the factory mounting points.
2. Position Running Boards: With assistance, carefully lift one running board and align it with the attached brackets.
3. Secure Running Boards: Attach the running board to the brackets using the remaining hardware. Again, do not fully tighten the bolts yet.
4. Adjust and Tighten: Once both running boards are loosely mounted, adjust their position to ensure they are level and properly spaced from the vehicle body. Once satisfied with the alignment, progressively tighten all bolts and nuts, starting from the center and working outwards. Ensure all connections are secure.
5. Repeat for Other Side: Follow the same steps for the opposite side of the vehicle.

Image: Illustration of the no-drilling installation process, highlighting the use of existing factory mounting points.

Image: A person installing the running board onto a truck, demonstrating the attachment of the board to the brackets.

5. Operating Instructions

The OEDRO running boards are designed to provide a stable and secure step for easier entry and exit from your truck, as well as improved access to the roof and truck bed.

• Stepping On/Off: Use the lower step for convenient entry and exit. The triple-convex platform design offers multiple stepping points.
• Roof and Bed Access: The upper steps and extended length facilitate easier reach to the vehicle's roof for cleaning or loading cargo, and to the truck bed for accessing items.
• Non-Slip Surface: The perforated step plates are engineered to provide enhanced grip, reducing the risk of slipping, especially in wet or muddy conditions.

Image: Two individuals utilizing the running boards to access the truck's interior and roof-mounted cargo.

Image: A close-up view of a foot stepping on the running board, demonstrating the 6-inch wide non-slip surface, even in snowy conditions.

6. Maintenance

Proper maintenance will extend the life and appearance of your OEDRO running boards.

• Regular Cleaning: Wash the running boards regularly with mild soap and water to remove dirt, salt, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the powder coating.
• Inspect for Damage: Periodically inspect the running boards for any signs of rust, chips in the powder coating, dents, or structural damage. Address any damage promptly to prevent further deterioration.
• Check Hardware: Every few months, or after heavy off-road use, check all mounting bolts and nuts to ensure they remain tight. Re-tighten if necessary.
• Corrosion Protection: The running boards feature a corrosion-resistant powder coating. If the coating is scratched or chipped, consider touching up the area with a suitable automotive paint to prevent rust.

Image: Visual representation of the running board's rust-resistant properties, emphasizing its durability.

7. Troubleshooting

This section addresses common issues you might encounter with your running boards.

• Loose Running Board: If the running board feels unstable or moves, check all mounting bolts and nuts. Re-tighten them securely. Over time, vibrations can cause hardware to loosen.
• Rust Appears: While designed to be corrosion-resistant, prolonged exposure to harsh elements or damage to the powder coating can lead to rust. Clean the affected area, remove any loose rust, and apply a rust-inhibiting primer and paint. If rust appears prematurely or extensively, contact OEDRO customer support.
• Difficulty with Installation: Ensure you are using the correct brackets for the correct side of the vehicle. Double-check that you are aligning with the factory mounting points. If issues persist, consult a professional installer.
• Unusual Noises (e.g., rattling): This often indicates loose hardware. Inspect all attachment points and tighten any loose bolts or nuts.

8. Specifications

Image: Technical diagram illustrating the dimensions of the OEDRO running board.

Image: Visual representation of the running board's 550 lbs weight capacity.

Image: Detailed view of the running board's construction, highlighting the unique powder-coated finish, all-steel build, and rust-resistant layer.

9. Warranty and Support

OEDRO running boards come with a 2-year manufacturer's warranty against defects in materials and workmanship. This warranty covers normal use and does not apply to damage resulting from improper installation, accident, abuse, neglect, or unauthorized modifications.

For warranty claims, technical assistance, or any questions regarding your product, please contact OEDRO customer support. Refer to the contact information provided with your purchase or visit the official OEDRO website for support details.