1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your MixBubole 900W Macerator Pump FLO700-B PRO. Please read these instructions thoroughly before use and retain them for future reference.
Video: Overview of the MixBubole 900W Macerator Pump FLO700-B PRO, highlighting its features and applications.
Product Overview
The MixBubole 900W Macerator Pump is designed for residential use, enabling the installation of plumbing fixtures in locations where gravity drainage is not feasible. It effectively pumps wastewater from toilets, sinks, showers, and other appliances to a main drainage system.
Key Features:
- Powerful Motor: 900W, 110V-120V/60Hz, 4000 RPM, all-copper coil, oil-filled for durability and heat resistance.
- High Pumping Capacity: Up to 29.5 ft vertical lift and 295 ft horizontal discharge, with a flow rate of 2200 GPH.
- Versatile Connections: Features 4 universal wastewater inlets (Ø 40mm) and 1 outlet, allowing connection to multiple fixtures.
- Automatic Operation: Fully automatic ON/OFF mechanism, activating at 3 inches water level and shutting off at 2 inches.
- Safety Design: Float switch mounted above water to prevent electrical leakage and short circuits.
- Low Noise: Operates at approximately 45 dB for quiet performance.
- Odor Control: Includes a replaceable activated carbon module for an odor-free environment.
- Durable Construction: Crafted from premium IPX4 waterproof PP material, resistant to aging and scratches.
- Macerating Blades: Stainless steel reamer quickly crushes debris to prevent clogging.
2. What is a Macerator Pump?
A macerator pump is a device that grinds and liquefies waste from toilets and other plumbing fixtures, allowing it to be pumped through a small-diameter pipe to a distant drain or sewer line. This is particularly useful in basements, extensions, or other areas where traditional gravity-fed plumbing is not practical.
Image: Diagram explaining the function of a macerator, which uses stainless steel rotating blades to liquefy waste.
3. Safety Information
- Always disconnect power before performing any maintenance or installation.
- Ensure proper ventilation during operation.
- Do not discharge any acids, alkalis, solvents, paint, or other corrosive chemicals into the system.
- Avoid flushing non-biodegradable items such as feminine hygiene products, wet wipes, or large quantities of paper.
- The pump is designed for domestic wastewater only.
- Ensure all connections are secure and watertight to prevent leaks.
- If the pump operates continuously or makes unusual noises, disconnect power and consult the troubleshooting section.
4. Package Contents
Verify that all components listed below are included in your package:
Image: Detailed view of the MixBubole Macerator Pump and its accessories, including various connectors and clamps.
- Macerator Pump Unit (1)
- Plug Mounted On The Pump (1)
- Hose Clamp (32-50mm) (5)
- Plastic Inlet Hose (4)
- Toilet Connection Rubber Ring (1)
- Hose Clamp (40-60mm) (3)
- Activated Carbon (1)
- Plastic Outlet Hose Elbow (1)
- Hose Clamp (110-120mm) (2)
- Check Valve (1)
- Front Lid (1)
- Instruction Manual (1)
5. Setup & Installation
Proper installation is crucial for the optimal performance and longevity of your macerator pump. If you are unsure about any step, consult a qualified plumber.
General Installation Notes:
- The pump should be installed on a flat, stable surface.
- Ensure adequate space around the unit for ventilation and maintenance.
- All connections must be sealed tightly to prevent leaks and odors.
- The one-way valve must be installed correctly in the outlet pipe to prevent backflow.
Installation Steps:
- Toilet Connection: Attach the toilet connection rubber ring to the toilet interface out on the pump. Secure it with a hose clamp and tighten the screws to ensure a stable connection.
- Inlet Connections: Connect the plastic inlet hoses to the four universal wastewater inlets on the pump. Secure each hose with a hose clamp and tighten the screws. These inlets can be used for a sink, shower, bathtub, or other appliances.
- Outlet Pipe Connection: Attach the plastic outlet hose elbow to the pump's outlet. Install the check valve within the drain line as per the diagram. Secure all connections with appropriate hose clamps. If the toilet tank covers the drain installation, you can use the side drain option.
- Vent Hole & Carbon Filter: Insert the activated carbon module into the designated vent hole on the top of the pump. This helps neutralize odors.
- Power Connection: Connect the pump to a grounded electrical outlet (110V-120V/60Hz). Ensure the power cord is not pinched or damaged.
- Placement: Position the pump in a suitable location, such as behind a toilet, under a sink, or near a washing machine, ensuring it is accessible for maintenance.
Image: Schematic diagram illustrating the correct connection of the side outlet pipe. Ensure the one-way valve is installed in the correct direction.
Image: The pump features four water inlets and one outlet, allowing for multiple fixture connections.
Image: Product details diagram highlighting the vent hole for the carbon filter and various inlet/outlet points.
Image: Examples of the compact macerator pump installed in different household environments, including laundry rooms, shower rooms, next to toilets, and under washbasins.
6. Operating Instructions
Automatic Operation:
The MixBubole Macerator Pump features a fully automatic ON/OFF mechanism. It will activate automatically when the water level inside the unit reaches approximately 3 inches and will shut off when the water level drops to 2 inches. This ensures efficient and hands-free operation.
Manual Button:
A manual button is provided on the top of the unit for drainage tests or in case of an emergency. Press this button to manually activate the pump and initiate drainage. Release the button to stop the pump. Use this feature cautiously and only when necessary.
Image: Close-up of the manual button on the pump, used for drainage tests or emergency activation.
7. Maintenance
Regular maintenance ensures the longevity and efficient operation of your macerator pump.
Activated Carbon Filter:
- The activated carbon module helps control odors. Check and replace the carbon filter periodically, or if odors become noticeable.
- To replace, unscrew the cap on the vent hole, remove the old filter, and insert a new one.
Cleaning:
- The exterior of the pump can be cleaned with a damp cloth and mild detergent. Do not use abrasive cleaners or solvents.
- For internal cleaning or descaling, specialized macerator cleaner products are available. Follow the product instructions carefully.
- Never attempt to open the pump housing unless you are a qualified technician.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not start | No power; float switch stuck; motor fault | Check power supply; inspect float switch for obstructions; contact support if motor fault is suspected. |
| Pump runs continuously | Float switch stuck; check valve faulty; continuous water inflow | Check float switch; inspect/replace check valve; identify and stop continuous water source. |
| Poor drainage/clogging | Non-flushable items; pipe obstruction; worn macerator blades | Avoid flushing inappropriate items; check pipes for blockages; inspect macerator blades (professional service recommended). |
| Unpleasant odors | Carbon filter needs replacement; poor ventilation; waste accumulation | Replace activated carbon filter; ensure proper ventilation; clean the unit. |
| Excessive noise | Foreign object in macerator; pump not stable; motor issue | Disconnect power and check for foreign objects (professional service recommended); ensure pump is on a stable surface; contact support for motor issues. |
9. Specifications
Image: Visual representation of the macerator pump highlighting its power, flow rate, and pumping capabilities.
| Feature | Detail |
|---|---|
| Brand | MixBubole |
| Model Number | FLO700-B PRO |
| Power | 900 Watts |
| Voltage | 110V-120V/60Hz |
| Horsepower | 1.2 HP |
| Motor Speed | 4000 RPM |
| Maximum Flow Rate | 2200 GPH (36 Gallons Per Minute) |
| Maximum Vertical Lift | 29.5 Feet |
| Maximum Horizontal Discharge | 295 Feet |
| Water Inlets | 4 (Ø 40mm universal) |
| Outlet | 1 (Ø 23, 25, 32, 38 mm adaptable) |
| Product Dimensions | 17"L x 6"W x 11"H |
| Item Weight | 19 Pounds |
| Material | Polypropylene (PP) |
| Waterproof Rating | IPX4 |
| Heat Resistance | Continuous 60°C, 4 hours at 80°C |
| Noise Level | 45 dB |
| Certifications | GS, CE |
10. Warranty & Support
Manufacturer's Warranty:
This MixBubole Macerator Pump FLO700-B PRO comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, neglect, accidents, or unauthorized repairs.
Customer Service:
For technical assistance, warranty claims, or any questions regarding your MixBubole Macerator Pump, please contact our customer service team. We offer 24/7 customer support to ensure your satisfaction.
Please have your model number (FLO700-B PRO) and purchase date available when contacting support.