KPAW M1 Automatic 2-Deck Card Shuffler User Manual

Introduction

Thank you for choosing the KPAW M1 Automatic 2-Deck Card Shuffler. This device is designed to provide efficient, quiet, and reliable card shuffling for a variety of card games. Please read this manual thoroughly to ensure proper use and maintenance of your card shuffler.

What's in the Box

• 1 × KPAW M1 Automatic Card Shuffler
• 1 × USB-C Charging Cable
• 1 × User Manual
• 1 × Packaging Box

Setup

1. Unpack the Shuffler: Carefully remove the KPAW M1 Automatic Card Shuffler and all accessories from its packaging.
2. Initial Charge: Before first use, ensure the shuffler is fully charged. Connect the provided USB-C charging cable to the charging port on the device and to a suitable USB power source. The charging indicator light will be RED while charging and turn GREEN when fully charged. Note: The shuffler cannot be operated while charging.
3. Placement: Place the shuffler on a flat, stable surface. The design requires a surface beneath the card collection area for shuffled cards to stack properly.

Image: Visual guide for setting up the KPAW M1 card shuffler, illustrating card placement and operation buttons.

Operating Instructions

The KPAW M1 shuffler supports 1 to 2 decks of standard-sized playing cards and is compatible with various card games including Poker, UNO, Bridge, Texas Hold'em, Phase 10, and Five Crowns.

1. Load Cards: Place 1 to 2 decks of cards into the two input trays on either side of the shuffler. Ensure cards are neatly stacked.
2. Select Shuffling Mode: The shuffler offers two modes:
   • Automatic Mode: Press the "AUTO" button once for effortless, fully automatic shuffling. The device will shuffle the cards completely.
   • Semi-Automatic (Manual) Mode: Press and hold the "MANUAL" button to shuffle. The shuffling will continue as long as the button is held down, stopping when released. This provides more control over the shuffling duration.
3. Shuffling Process: The shuffler operates quickly, typically completing a full shuffle in about 3 seconds. It is designed for low-noise operation (approximately 65dB).
4. Retrieve Cards: Once shuffling is complete, lift the shuffler to collect the neatly stacked cards from the output tray below.

Image: Illustration of the KPAW M1 card shuffler's dual modes (Manual and Auto) and how to place cards for shuffling.

Image: The KPAW M1 card shuffler demonstrating its adaptability to different card sizes, including Standard, Bridge, UNO, Phase 10, and Five Crowns.

Maintenance

• Storage: When not in use, store the shuffler in a dry place away from direct sunlight and extreme temperatures.
• Cleaning: Use a soft, dry cloth to wipe the exterior of the shuffler. Do not use abrasive cleaners or immerse the device in water.

Troubleshooting Tips

• Shuffler Not Working: Ensure the device is fully charged. The charging indicator light should be green. Remember, the shuffler cannot operate while charging.
• Card Jams:
  • Ensure cards are placed neatly in the input trays.
  • Avoid overfilling the trays; the shuffler is designed for 1-2 decks.
  • Consider using good quality cards (e.g., Bicycle brand or 100% plastic cards) as poor quality or worn cards can cause jams.
  • For optimal performance and to extend the lifespan of the shuffler, try filling the hoppers approximately half full on each side.
• Incomplete Shuffle: If cards are not shuffled to your satisfaction, run them through the shuffler again.

Specifications

Warranty and Support

The KPAW M1 Automatic 2-Deck Card Shuffler comes with a 1-Year Manufacturer Warranty. For any product inquiries, technical support, or warranty claims, please refer to the contact information provided with your purchase or visit the official KPAW website.