Vision LED Bluetooth Headphones User Manual

Introduction

Thank you for choosing the Vision LED Bluetooth Headphones. These wireless over-ear headphones feature dynamic RGB LED lighting and Bluetooth connectivity for an immersive audio experience. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.

Package Contents

Please verify that all items are present in your package:

• Vision LED Bluetooth Headphones
• Micro USB Charging Cable
• Instruction Manual (this document)

Image: Vision LED Bluetooth Headphones packaging, displaying the product and key features.

Setup

1. Charging the Headphones

1. Connect the Micro USB charging cable to the charging port on the headphones.
2. Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
3. The LED indicator on the headphones will illuminate during charging and turn off when fully charged.
4. A full charge typically takes approximately 1.5 hours.

2. Powering On/Off

• To power on, press and hold the Power button until the LED indicator lights up.
• To power off, press and hold the Power button until the LED indicator turns off.

3. Bluetooth Pairing

1. Ensure the headphones are charged and powered off.
2. Press and hold the Power button for approximately 5-7 seconds until the LED indicator flashes blue and red, indicating pairing mode.
3. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
4. Select "Vision Led" from the list of available devices.
5. Once paired, the LED indicator on the headphones will flash blue slowly or turn solid blue.
6. The headphones will automatically attempt to reconnect to the last paired device when powered on.

Operating Instructions

Audio Playback

• Play/Pause: Press the Multi-function button once.
• Next Track: Press and hold the Volume Up button.
• Previous Track: Press and hold the Volume Down button.
• Volume Up: Short press the Volume Up button.
• Volume Down: Short press the Volume Down button.

Call Management

• Answer/End Call: Press the Multi-function button once.
• Reject Call: Press and hold the Multi-function button for 2 seconds.
• Redial Last Number: Double-press the Multi-function button.

RGB LED Lighting Control

The Vision LED headphones feature dynamic color-changing RGB lighting. A dedicated button or a combination of buttons (refer to device-specific controls if available) can be used to cycle through lighting modes or turn the lighting on/off. Consult the quick start guide included in your package for specific button functions related to LED control.

Maintenance

• Clean the headphones with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Avoid exposing the headphones to extreme temperatures, humidity, or direct sunlight.
• Store the headphones in a cool, dry place when not in use.
• Do not attempt to disassemble or modify the headphones, as this will void the warranty.

Troubleshooting

Specifications

• Model: Vision Led
• Connectivity: Bluetooth 5.0
• Bluetooth Range: Up to 33 feet (10 meters)
• Charging Time: Approximately 1.5 hours
• Impedance: 16 Ohms
• Sensitivity: 105 dB
• Frequency Response: 20 Hz (lower bound)
• Audio Driver Type: Dynamic Driver
• Noise Control: Passive Noise Cancellation
• Material: Plastic

Warranty and Support

Specific warranty information for the Vision LED Bluetooth Headphones is not available in the provided product details. Please refer to the warranty card included in your product packaging or visit the manufacturer's official website for detailed warranty terms and conditions.

For technical support or customer service, please contact the retailer or manufacturer directly using the contact information provided in your product documentation.