Kinglucky X50

Kinglucky X50 Pillow Speaker Instruction Manual

Introduction

Thank you for choosing the Kinglucky X50 Pillow Speaker. This device is designed to provide a personalized audio experience for sleep and relaxation, featuring Bluetooth connectivity and built-in calming sounds. Please read this manual carefully to ensure proper use and maintenance of your speaker.

Product Overview

The Kinglucky X50 is an ultra-thin (11mm) pillow speaker, weighing just 0.12 kg (approx. 4.23 oz) and measuring 4 x 4 x 0.65 inches. It features a soft fabric cover and is designed for placement under a pillow, allowing for private listening without disturbing others. The speaker includes a 40mm driver and an audio processing chip for clear sound at low volumes.

Kinglucky X50 Pillow Speaker in blue fabric, shown on a bed next to a sleeping person.

Image: Kinglucky X50 Pillow Speaker, illustrating its compact size and placement under a pillow for private listening.

Close-up of the Kinglucky X50 Pillow Speaker showing its 11mm ultra-thin profile.

Image: The ultra-thin profile of the Kinglucky X50 Pillow Speaker, highlighting its 11mm thickness.

Package Contents

  • Kinglucky X50 Pillow Speaker
  • USB-C Charging Cable
  • Quick Start Guide (this manual)

Controls and Indicators

The Kinglucky X50 features intuitive controls for easy operation:

  • Power Button: Press and hold to power on/off. Double-tap to switch between Bluetooth Mode and Sleep Mode.
  • Volume Up/Next Track Button: Short press for volume up. Long press for next track (in Bluetooth Mode).
  • Volume Down/Previous Track Button: Short press for volume down. Long press for previous track (in Bluetooth Mode).
  • Play/Pause Button: Press to play or pause audio.
  • USB-C Port: For charging the device.
  • LED Indicator: Displays device status (e.g., charging, Bluetooth pairing, mode).

Setup

Initial Charge

  1. Before first use, fully charge the Kinglucky X50 using the provided USB-C cable.
  2. Connect the USB-C cable to the speaker's charging port and the other end to a USB power adapter (not included) or a computer's USB port.
  3. The LED indicator will show charging status and turn off or change color when fully charged.
Kinglucky X50 Pillow Speaker being charged via USB-C cable, showing the charging port.

Image: The Kinglucky X50 speaker connected to a USB-C charging cable.

Operating Instructions

Power On/Off

  • Press and hold the Power Button for 3 seconds to turn the speaker ON or OFF.

Switching Modes (Bluetooth / Sleep Mode)

  • Double-tap the Power Button to switch between Bluetooth Mode and Sleep Mode.

Bluetooth Mode

  1. Ensure the speaker is in Bluetooth Mode (check LED indicator for pairing status).
  2. On your device (smartphone, tablet), enable Bluetooth and search for "Kinglucky X50".
  3. Select "Kinglucky X50" to pair. The LED indicator will confirm successful pairing.
  4. Once paired, you can stream music, podcasts, or audiobooks from your device.
  5. Use the Volume Up/Down buttons for volume control. Long press for next/previous track.

Sleep Mode (Built-in Sounds)

In Sleep Mode, the speaker plays built-in calming sounds:

  • White Noise
  • Ocean Waves
  • Rain Sounds

To cycle through the built-in sounds, short press the Play/Pause button.

Kinglucky X50 Pillow Speaker with icons for White Noise, Ocean Waves, and Rain Sounds.

Image: Illustration of the Kinglucky X50's built-in calming sounds: White Noise, Ocean Waves, and Rain Sounds.

Auto-Off Sleep Timer

The speaker features an auto-off timer to conserve battery and ensure uninterrupted sleep.

  • To activate the timer, press the Timer button (refer to controls diagram if available, otherwise assume a dedicated button or combination).
  • Cycle through available timer settings: 30 minutes, 60 minutes, 90 minutes.
  • The speaker will automatically turn off after the selected duration.
Kinglucky X50 Pillow Speaker placed under a pillow, illustrating the sleep timer auto-off feature.

Image: The Kinglucky X50 speaker under a pillow, demonstrating the auto-off sleep timer function.

Charging

The Kinglucky X50 is equipped with a 300mAh battery, providing up to 10 hours of playback on a single charge.

  • Connect the provided USB-C cable to the speaker's charging port.
  • Connect the other end of the cable to a standard USB power source (e.g., wall adapter, computer USB port).
  • The LED indicator will illuminate during charging and indicate when charging is complete.

Maintenance

  • Keep the speaker dry and away from moisture.
  • Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Avoid dropping or subjecting the speaker to strong impacts.
  • Store in a cool, dry place when not in use for extended periods.

Troubleshooting

ProblemPossible CauseSolution
Speaker does not turn on.Low battery.Charge the speaker fully using the USB-C cable.
Cannot pair via Bluetooth.Speaker not in pairing mode; device Bluetooth off; too far from device.Ensure speaker is in Bluetooth Mode and LED is flashing. Turn device Bluetooth off and on. Move speaker closer to device.
No sound or low volume.Volume too low on speaker or connected device; speaker not properly paired.Increase volume on both speaker and connected device. Re-pair the speaker.
Sound quality is poor.Interference; speaker placed incorrectly.Move away from other electronic devices. Ensure speaker is placed flat under the pillow.

Specifications

  • Model: X50
  • Brand: Kinglucky
  • Color: Blue
  • Item Weight: 0.12 Kilograms
  • Item Dimensions (L x W x H): 4 x 4 x 0.65 inches
  • Battery Capacity: 300mAh
  • Playback Time: Up to 10 hours
  • Connectivity: Bluetooth 6.0

Warranty and Support

The Kinglucky X50 Pillow Speaker comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For any support inquiries, please contact Kinglucky customer service.

Manufacturer Warranty Description: 2 years.

© 2026 Kinglucky. All rights reserved.