1. Introduction
The Cmore Baby Shower Stand is designed to provide a safe and comfortable bathing experience for infants and toddlers aged 6 to 36 months. This stand offers adjustable height, secure support arms, and a stable anti-slip base, making bath time easier for parents and enjoyable for children. Its foldable design allows for convenient storage.

Image 1.1: Overview of the Cmore Baby Shower Stand highlighting its key features.
2. Important Safety Information
Please read all instructions carefully before using the Cmore Baby Shower Stand. Failure to follow these instructions could result in serious injury or death.
- Always supervise your child: Never leave your child unattended in the shower stand, even for a moment. Drowning can occur quickly and in very shallow water.
- Age and Weight Limits: This stand is suitable for infants and toddlers aged 6 to 36 months, weighing up to 33 lbs (15 kg). Do not use for children outside this age or weight range.
- Stable Surface: Always place the shower stand on a flat, stable, and non-curved surface. Do NOT use in curved bathtubs.
- Check Stability: Before each use, ensure the stand is fully assembled, all locking mechanisms are engaged, and it is stable.
- Water Temperature: Always check the water temperature before placing your child in the stand to prevent burns.
- Anti-Slip Mat: Ensure the child's feet are placed on the textured anti-slip mat for added safety.
- BPA-Free Material: The stand is made from BPA-free ABS and PP plastic, ensuring safety for your child.

Image 2.1: A child being bathed in the Cmore Baby Shower Stand, demonstrating proper usage and supervision.
3. Package Contents
Your Cmore Baby Shower Stand package should contain the following components:
- Main Shower Stand Base with adjustable central column
- Secure Wraparound Support Arms (pre-attached or easily attachable)
- Integrated Anti-Slip Mat
- Shower Head Holder
4. Setup Guide
Follow these steps to set up your Cmore Baby Shower Stand:
- Unfold the Stand: Place the folded stand on a flat surface. Gently pull the central column upwards until it locks into an upright position.
- Attach Support Arms (if separate): If the support arms are not pre-attached, align them with the top of the central column and press down firmly until they click securely into place. Ensure both sides are locked.
- Adjust Height: Press the release buttons on the central column to adjust the height to your desired level. The arm height is adjustable from 16.1 to 21.2 inches. Ensure the column locks into one of the height settings.
- Adjust Arm Width: The support arms have hidden release buttons underneath. Press these buttons to adjust the arm width for a closer fit, suitable for children with a chest circumference between 9.8 to 13.7 inches. Release the buttons to lock the arms in place.
- Verify Stability: Before placing your child in the stand, gently push on the stand to ensure it is stable and all components are securely locked.

Image 4.1: Detailed view of the stand's adjustable features and locking mechanisms.

Image 4.2: The Cmore Baby Shower Stand demonstrating adjustable height and the shower head holder.
Setup Video Guide
Video 4.1: This video demonstrates the easy unfolding, assembly, and adjustment of the Cmore Baby Shower Stand, including securing the arms and setting the height.
5. Operating Instructions
Using the Cmore Baby Shower Stand for a stress-free bathing experience:
- Prepare the Area: Ensure the bathroom floor is dry and the stand is placed on a flat, non-curved surface.
- Place Child in Stand: Gently place your child into the stand, ensuring their feet are on the anti-slip mat and the support arms comfortably embrace them. Adjust arm width if necessary for a snug fit.
- Check Water Temperature: Before applying water, always test the temperature to ensure it is safe and comfortable for your child.
- Bathing: Use the shower head holder on the back of the stand to keep the shower head accessible, allowing both hands to be free for washing your child.
- Diaper Changes and Cream Application: The stand can also be used for convenient diaper changes and applying skin cream/lotion, reducing strain on your back.
- Remove Child: After bathing or use, carefully remove your child from the stand.

Image 5.1: A mother and child enjoying bath time with the Cmore Baby Shower Stand.
6. Care and Maintenance
Proper care will extend the life of your Cmore Baby Shower Stand:
- Cleaning: After each use, wipe down the stand with a soft cloth and mild soap. Rinse thoroughly and allow to air dry. Do not use abrasive cleaners or harsh chemicals.
- Drying: Ensure the stand is completely dry before folding and storing to prevent mold or mildew.
- Storage: The stand folds away into a compact format. Store in a cool, dry place away from direct sunlight.

Image 6.1: The Cmore Baby Shower Stand in its folded configuration for compact storage.
7. Troubleshooting
If you encounter any issues with your Cmore Baby Shower Stand, refer to the following common solutions:
- Stand feels unstable: Ensure the stand is placed on a completely flat surface. Check that the central column is fully extended and locked into a height setting. Verify that the support arms are securely attached and locked.
- Support arms not locking: Ensure the arms are correctly aligned with the central column and pressed down firmly until a click is heard. Check for any obstructions.
- Difficulty adjusting height/arm width: Ensure the respective release buttons are fully depressed when attempting to adjust. If there is resistance, check for any debris or obstructions in the mechanism.
- Child slipping: Ensure the child's feet are positioned on the textured anti-slip mat. Always supervise the child closely.
If problems persist, please contact customer support.
8. Specifications
| Product Name | Cmore Baby Shower Stand |
| Model Number (ASIN) | B0GK8WCYB7 |
| Material Composition | ABS, PP (BPA-Free) |
| Recommended Age | 6 to 36 Months |
| Maximum Weight Capacity | 33 lbs (15 kg) |
| Adjustable Arm Height | 16.1 to 21.2 inches (41 to 54 cm) |
| Adjustable Arm Width | 9.8 to 13.7 inches (25 to 35 cm) |
| Base Dimensions | 16.5 x 17.7 inches (42 x 45 cm) |
| Item Weight | 4.84 pounds (2.2 kg) |
| Package Dimensions | 18.11 x 16.93 x 5.91 inches |
| Batteries Required | No |

Image 8.1: Dimensional diagram and base features of the Cmore Baby Shower Stand.
9. Warranty and Support
For warranty information or customer support, please refer to the product packaging or contact the manufacturer directly. Keep your purchase receipt for any warranty claims.