Introduction
Thank you for choosing the truke Mega 12 True Wireless Earbuds. This manual provides detailed instructions for setting up, operating, and maintaining your earbuds to ensure optimal performance and longevity. Please read this manual carefully before use.
What's in the Box
- truke Mega 12 True Wireless Earbuds (Left and Right)
- Charging Case
- Ear Cushions (various sizes)
- Type-C Charging Cable
- User Manual
Setup Guide
1. Initial Charging
Before first use, fully charge the earbuds and the charging case. Connect the provided Type-C charging cable to the charging port on the case and a compatible USB power source. The indicator lights on the case will show the charging status.
Image: truke Mega 12 Earbuds and Charging Case. A full charge provides up to 70 hours of total playtime. A 10-minute charge offers 150 minutes of playback.
2. Pairing with a Device
- Ensure the earbuds are charged.
- Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing LED light on one or both earbuds.
- On your device (smartphone, tablet, laptop), enable Bluetooth.
- Search for "truke Mega 12" in the list of available Bluetooth devices and select it to connect.
- Once connected, a voice prompt will confirm successful pairing.
Dual Device Pairing: The truke Mega 12 earbuds support simultaneous connection to two devices. After pairing with the first device, disconnect the earbuds from it. Pair with the second device. Then, reconnect to the first device from its Bluetooth settings. The earbuds should now be connected to both devices, allowing seamless switching.
Image: truke Mega 12 Earbuds connected to both a smartphone and a laptop, illustrating the dual device pairing feature.
Operating Instructions
1. Touch Controls
The truke Mega 12 earbuds feature intuitive touch controls on each earbud for managing playback, calls, and other functions. Specific touch gestures may vary; refer to the quick start guide for detailed commands.
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Long press on either earbud.
- Activate Voice Assistant: Triple tap on either earbud.
2. Gaming Mode (Ultra-Low Latency)
For an optimized gaming experience, activate "Battle Mode" to reduce audio latency to 40ms. This ensures synchronized audio and video, providing a competitive edge in gaming.
Image: truke Mega 12 Earbuds alongside a gaming controller, highlighting the 40ms ultra-low latency feature for gaming.
3. Spatial Audio
Experience immersive 24-bit spatial audio, delivering a 360-degree surround sound experience. This feature enhances music and movie playback by creating a more dynamic and engaging soundstage.
Image: A visual representation of 24-bit 360-degree spatial sound, indicating an immersive audio experience.
4. Calling with Environmental Noise Cancellation (ENC)
The earbuds are equipped with advanced Quad-Mic Environmental Noise Cancellation (ENC) technology. This feature filters out ambient noise, ensuring crystal-clear conversations even in noisy environments.
Image: Diagram illustrating the Quad Mic Pure Voice True ENC technology, designed to reduce background noise for clear calls.
Maintenance
- Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
- Ear Tips: Remove and clean the ear tips periodically with water and mild soap. Ensure they are completely dry before reattaching.
- Storage: When not in use, store the earbuds in their charging case to protect them from dust and damage.
- Water Resistance: The earbuds are rated IPX5 water resistant, meaning they can withstand splashes and light rain. Do not submerge them in water or expose them to heavy rain.
Troubleshooting
1. Earbuds Not Pairing
- Ensure both earbuds are charged.
- Place earbuds back into the charging case, close the lid, then open it again to reset.
- Turn off and on Bluetooth on your device.
- Forget "truke Mega 12" from your device's Bluetooth list and attempt to pair again.
2. Only One Earbud Playing Sound
- Ensure both earbuds are charged.
- Place both earbuds back into the charging case, close the lid, and then open it. This should re-sync them.
- If the issue persists, try resetting the earbuds (refer to the full user manual for specific reset procedures if available).
3. Charging Issues
- Check if the charging cable is securely connected to both the case and the power source.
- Ensure the charging port is clean and free of debris.
- Try using a different Type-C charging cable and power adapter.
Specifications
| Brand | truke |
| Model Name | truke Mega 12 earbuds |
| Model Number | S40 |
| Ear Placement | In Ear |
| Form Factor | In Ear |
| Drivers | 13mm Titanium Drivers |
| Spatial Audio | 24-bit 360° Spatial Sound |
| Latency | 40ms Ultra-Low Latency (Battle Mode) |
| Microphone | Quad-Mic with Environmental Noise Cancellation (ENC) |
| Total Playtime | Up to 70 Hours (with charging case) |
| Fast Charging | 10 minutes charge for 150 minutes playback |
| Connectivity | Bluetooth 5.4, Dual Device Pairing |
| Water Resistance | IPX5 |
| Item Weight | 41 Grams |
| Country of Origin | India |
Image: Exploded view of the 13mm Titanium Driver, highlighting its components for high-fidelity sound.
Warranty and Support
Warranty: The truke Mega 12 True Wireless Earbuds come with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims.
Customer Support: For any technical assistance, troubleshooting, or warranty-related queries, please contact truke customer support. Contact details can typically be found on the official truke website or on the packaging.