Introduction
The SANSI RGB Submersible Pool Light is designed to provide vibrant and reliable illumination for your pool, pond, or other outdoor water features. Featuring advanced LED technology, IP68 waterproofing, and multiple mounting options, this light offers both functionality and aesthetic appeal. This manual provides essential information for safe installation, operation, and maintenance of your SANSI pool lights.
Key Features:
- Super Bright and Durable: Utilizes 8 optical lenses and a high-efficiency light source, offering 4 times the brightness of conventional pool lights and an average duration of up to 60 hours.
- IP68 Water Resistance and Double Sealing: Equipped with two sealing rings (side and bottom) for enhanced waterproofing, suitable for underwater use up to 3 meters deep without leaks.
- Easy Installation, Multiple Mounting Options: Includes magnetic plates, suction cups, and strong adhesive for versatile installation on various surfaces like metal, tiles, inflatable pools, and above-ground pools.
- Wireless Remote Control and 20 Color Modes: Control colors, brightness, and dynamic modes from a distance of up to 40 meters (in air) or 2 meters (underwater). The remote can be used with wet hands.
- Reliable Quality: Manufactured with an anti-oxidation internal magnet, durable PC casing, and an optimized power system for extended lifespan.
Package Contents
Please check the package to ensure all items are present and in good condition:
- 2 x SANSI Submersible LED Lights (AA batteries not included)
- 8 x Suction Cups
- 2 x Magnetic Attraction Plates
- 1 x Adhesive Gel
- 1 x Remote Control (AAA batteries not included)
- 1 x User Guide
Image: Package contents diagram.
Safety Information
- Always ensure the battery compartment is securely closed and sealed before submerging the light in water.
- Do not mix old and new batteries, or different types of batteries.
- Keep the remote control dry. It is not waterproof.
- Keep out of reach of children.
- Dispose of batteries according to local regulations.
Setup and Installation
1. Battery Installation
- Twist open the light unit to access the battery compartment.
- Insert 3 AA batteries into each light unit, observing the correct polarity (+/-).
- Securely close and twist the light unit until it is tightly sealed. Ensure the double sealing rings are properly seated to prevent water leakage.
- Open the remote control's battery compartment and insert 2 AAA batteries, observing the correct polarity (+/-).
- Close the remote control's battery compartment.
Image: Internal view of the light showing battery compartment and double seals.
2. Mounting Options
The SANSI pool lights offer versatile installation methods:
- Magnetic Mount (for metal surfaces):
Simply attach the light directly to any magnetic metal surface. The internal anti-oxidation magnet provides a strong hold.
Image: Magnetic installation method.
- Magnetic Plate with Adhesive (for above-ground pools or non-metal surfaces):
This method is ideal for above-ground pools with thin walls or other non-metal surfaces.- Clean the desired installation surface thoroughly.
- Apply the provided adhesive gel to one side of the magnetic attraction plate.
- Attach the plate to the exterior wall of the pool, ensuring the light can be magnetically attached to the interior wall. The exterior wall thickness should be less than 0.1 cm for optimal magnetic attraction.
- Allow 24 hours for the adhesive to cure before attaching the light. The adhesive is safe for underwater use.
Image: Installation method for above-ground pools.
Image: Installation method using adhesive gel.
- Suction Cups (for smooth, hard surfaces):
For tiled pools or other smooth, non-porous surfaces.- Ensure the surface is clean and dry before application.
- Attach the 4 suction cups to the back of the light unit.
- Press the light firmly onto the desired smooth surface. Avoid placing suction cups over grout lines or seams for best adhesion.
Image: Suction cup installation method.
3. Pool Light Quantity Recommendations
For optimal illumination, consider the following guidelines:
- Square Pools: Recommended spacing of 1.5m - 2m per lamp. For widths greater than 3m, double-sided installation is recommended.
- Circular Pools:
- Diameter < 2m: 2 lamps
- Diameter 2-3m: 2-3 lamps
- Diameter 4-5m: 4-6 lamps
Image: Pool light quantity recommendations.
Operating Instructions
Use the provided RF remote control to manage your SANSI pool lights.
Image: RF Remote Control functionality and range.
- Power On/Off: Press the ON or OFF button on the remote.
- Color Selection: Choose from 20 vivid colors. A single click on a color button selects the top-half colors, while a double click selects the bottom-half colors.
Image: 20 vivid light colors and selection method.
- Brightness Adjustment: Adjust the light intensity with 5 levels of brightness (20%, 40%, 60%, 80%, 100%).
Image: Dynamic modes and brightness levels.
- Dynamic Modes: Select from three dynamic lighting effects: FLASH (quick color changes), SMOOTH (gradual color transitions), and FADE (slow, gentle color changes).
- Timer Function: Set an automatic shut-off timer for 2 hours (2H), 4 hours (4H), or 6 hours (6H). Press the corresponding button on the remote. To cancel the timer, press the TIMER OFF button.
Image: Auto timer settings.
- Remote Control Range: The RF remote works up to 40 meters in open air and up to 2 meters underwater. It does not require direct line-of-sight.
Maintenance
- Battery Replacement: Replace AA batteries in the light units and AAA batteries in the remote control when brightness diminishes or the remote becomes unresponsive.
- Cleaning: Regularly clean the light units, especially if used in saltwater pools, to prevent mineral accumulation and ensure optimal performance and longevity. Use a soft cloth and mild detergent if necessary.
- Sealing Check: Before each submersion, visually inspect the double sealing rings for any signs of wear or damage. Ensure the light unit is tightly twisted shut to maintain its IP68 waterproof rating.
- Storage: When not in use for extended periods, remove batteries from both the lights and the remote control and store them in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Dead or incorrectly inserted batteries in the light unit. Remote control batteries are dead or remote is out of range. | Replace AA batteries in the light, ensuring correct polarity. Replace AAA batteries in the remote. Ensure remote is within operating range (40m air / 2m water). |
| Remote control is unresponsive. | Dead or incorrectly inserted batteries in the remote. Remote is too far from the lights. | Replace AAA batteries in the remote, ensuring correct polarity. Move closer to the lights. |
| Water inside the light unit. | Battery compartment not sealed properly. Damaged sealing rings. | Immediately remove the light from water, open, and dry thoroughly. Check sealing rings for damage and replace if necessary. Ensure the unit is tightly sealed before re-submerging. |
| Light is dim or flickers. | Low battery power. | Replace AA batteries in the light unit. |
| Suction cups do not hold. | Surface is not clean, smooth, or dry. Suction cups are worn. | Clean and dry the surface thoroughly. Ensure the surface is smooth and non-porous. Avoid grout lines. Replace suction cups if worn. |
Specifications
| Brand | SANSI |
| Model Number | C21SD002 |
| Dimensions (L x W x H) | 8.5 x 8.5 x 3.5 cm |
| Weight (per light) | 0.1 kg |
| Color | RGB (20 variable colors) |
| Material | Plastic |
| Power Source | Battery (3x AA per light, 2x AAA for remote) |
| Power | 1 Watt (per light) |
| Water Resistance Rating | IP68 (Waterproof up to 3 meters) |
| Control Method | RF Remote Control |
| Special Features | Double sealing rings, Magnetic/Suction Cup/Adhesive mounting, 5 brightness levels, 3 dynamic modes, 2/4/6H timer |
| Smart Home Compatibility | Not compatible |
Warranty and Support
SANSI provides a one-year support for this product from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.
For technical assistance, warranty claims, or any questions regarding your SANSI RGB Submersible Pool Lights, please contact the seller or SANSI customer support through the platform where the product was purchased. Please have your order number and product model (C21SD002) ready when contacting support.