1. Introduction
The TESmart HKS0202A2U Dual Monitor HDMI KVM Switch allows you to control two computers using a single set of keyboard, mouse, and two monitors. This device supports 4K@60Hz resolution, USB 3.0 data transfer, and includes EDID emulators to maintain display settings during switching. It is designed to streamline your workspace and enhance productivity across multiple systems.
2. Package Contents
Verify that all items listed below are included in your package:
- 1 x TESmart 2x2 HDMI KVM Switch
- 2 x 5ft HDMI+USB-B Cables
- 2 x 5ft HDMI Cables
- 1 x IR Remote Control (AAA batteries not included)
- 1 x DC 12V Power Adapter
- 1 x User Manual

3. Setup Instructions
Follow these steps to connect your TESmart KVM Switch:
- Power Connection: Connect the included DC 12V power adapter to the KVM switch and then to a power outlet.
- Keyboard and Mouse Connection: Plug your wired or wireless keyboard and mouse into the dedicated K&M USB ports on the KVM switch. Note: Bluetooth keyboards and mice are not supported.
- Computer Connections: Connect each of your two computers (PC1 and PC2) to the KVM switch using the provided HDMI+USB-B cables and additional HDMI cables. Each computer requires two HDMI connections (Input A and Input B) and one USB-B connection to the KVM switch. Ensure your laptop is capable of dual monitor output before connecting.
- Monitor Connections: Connect your two monitors to the HDMI output ports (Display A and Display B) on the KVM switch. HDMI output cables are not included.
- USB 3.0 Peripherals: Connect any USB 3.0 peripherals (e.g., printer, scanner, webcam, hard disk) to the USB 3.0 ports on the KVM switch. The front panel USB 3.0 port can also charge your phone.
- Audio Connection: Connect your audio device (e.g., headphones, speakers) to the 3.5mm audio output port on the KVM switch.

4. Operating Instructions
4.1 Switching Between Computers
The KVM switch offers multiple methods for switching between connected computers:
- Keyboard Hotkeys: The default hotkey combination is [Right-Ctrl] key pressed twice, followed by '1' or '2' to switch to PC1 or PC2 respectively. Alternative hotkeys are [Scroll Lock] or [Left-Ctrl] key.
- Mouse Wheel Switching: This mode is off by default. You can enable it using a keyboard hotkey command. Once enabled, you can switch by double-clicking the mouse wheel.
- Front Panel Buttons: Press the 'Select' button on the front panel to cycle through the connected computers.
- IR Remote Control: Use the included IR remote control to switch between computers.


4.2 Display Modes
The KVM switch supports two main display modes:
- Mode 1: One PC Across Two Monitors (Extended or Mirror): Both monitors display content from a single PC, either extending the desktop or mirroring it.
- Mode 2: Two PCs on Two Monitors: Each monitor displays content from a different PC, allowing you to view both systems simultaneously.

4.3 EDID Emulation
The KVM switch features EDID emulators in each input port. This ensures that your computers always receive correct display information, preventing display settings from changing or windows from rearranging when switching inputs, especially in display mode 1.

4.4 Independent USB & Audio Focus Lock
You can maintain USB and audio connections to the current source while switching displays. This means your headphones will remain active during a switch, and you can continue using USB peripherals without interruption.
- Switch USB 3.0 Device: Use hotkeys (e.g., [Scroll Lock] twice, then Up Arrow) to switch the USB 3.0 device focus between PCs in display mode 2.
- Switch Audio Focus: Use hotkeys (e.g., [Scroll Lock] twice, then Down Arrow) to switch audio focus between PCs.

4.5 USB 3.0 Data Transfer and Charging
The integrated USB 3.0 ports support data transfer rates up to 5Gbps, which is 10 times faster than USB 2.0. The front panel USB 3.0 port also provides charging capabilities for your phone.

5. Maintenance
To ensure the longevity and optimal performance of your KVM switch:
- Keep the device in a cool, dry place away from direct sunlight and heat sources.
- Clean the exterior with a soft, dry cloth. Avoid using liquid cleaners or solvents.
- Ensure proper ventilation around the unit to prevent overheating.
- Avoid placing heavy objects on top of the KVM switch.
6. Troubleshooting
If you encounter issues with your KVM switch, refer to the following common solutions:
- No Display/Video Output:
- Ensure all HDMI cables are securely connected to both the KVM switch and your monitors/computers.
- Verify that the KVM switch is powered on and the correct input is selected.
- Check if your computer's graphics card supports dual monitor output.
- Try using different HDMI cables or connecting monitors directly to the computer to rule out cable or monitor issues.
- Ensure your computer's display settings are configured for extended or mirrored displays as desired.
- Keyboard/Mouse Not Responding:
- Confirm that the keyboard and mouse are plugged into the dedicated K&M USB ports on the KVM switch.
- Ensure the USB-B cables from the computers to the KVM switch are properly connected.
- Restart the KVM switch and the connected computers.
- Test the keyboard and mouse directly with the computer to ensure they are functional.
- Display Settings Change After Switching:
- The KVM switch includes EDID emulators to prevent this. Ensure your KVM is operating in a mode that fully utilizes EDID emulation (typically display mode 1).
- If the issue persists, check for any available firmware updates for your KVM switch from the manufacturer's website.
- Audio Issues:
- Verify that your audio device is correctly plugged into the KVM's audio port.
- Check the audio output settings on your computer to ensure the KVM's audio output is selected.
- Use the independent audio focus hotkeys to ensure audio is directed to the desired computer.
7. Specifications
| Feature | Specification |
|---|---|
| Model | TES-HKS0202A2U-USBK-V2 |
| Brand | TESmart |
| Connectivity Protocol | USB 3.0 |
| Max Resolution | 3840x2160 (4K) @60Hz, 3440x1440@100Hz |
| Video Support | 3D, HDR10, HDCP2.2, Dolby Vision |
| USB 3.0 Data Rate | Up to 5Gbps |
| Control Method | Push Button, Remote, Hotkey |
| Operating Voltage | 12 Volts |
| Current Rating | 3 Amps |
| Wattage | 36 watts |
| Material | Metal |
| Item Dimensions (L x W x H) | 11.81 x 4.33 x 1.18 inches |
| Operating Temperature | Up to 50 Degrees Celsius |
| International Protection Rating | IP41 |
| Certification | FCC |
8. Warranty and Support
The TESmart HKS0202A2U KVM Switch comes with a 1-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact TESmart customer service directly through their official website or the retailer where the product was purchased.