Introduction
Thank you for choosing the atomberg SilenceAire Hi-Speed 400mm BLDC Pedestal Fan. This manual provides essential information for the safe and efficient use of your new fan. Please read these instructions carefully before assembly, operation, or maintenance, and retain them for future reference.
Image: The atomberg SilenceAire Hi-Speed Pedestal Fan, showcasing its sleek design.
Important Safety Instructions
- Always ensure the fan is unplugged before cleaning or performing any maintenance.
- Do not insert fingers or any objects through the fan guard when the fan is operating.
- Keep the fan away from water or other liquids to prevent electric shock.
- Do not operate the fan with a damaged cord or plug. Contact customer support for repairs.
- Ensure the fan is placed on a stable, level surface to prevent tipping.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
What's in the Box
Upon unpacking, please verify that all components are present and undamaged:
- Blade set - 1 Unit
- Remote - 1 Unit
- Motor box - 1 Unit
- Shackle kit - 1 Unit
- Manual Leaflet & Warranty card - 1 Unit
Setup and Assembly
Follow these steps to assemble your atomberg SilenceAire Pedestal Fan:
- Base Assembly: Attach the pedestal pole to the base using the provided screws and shackle kit. Ensure it is securely fastened.
- Motor Unit Attachment: Mount the motor box onto the top of the pedestal pole.
- Rear Guard Installation: Secure the rear fan guard to the motor unit.
- Blade Installation: Carefully attach the fan blades to the motor shaft. Ensure they are correctly aligned and secured with the provided cap/nut.
- Front Guard Installation: Place the front fan guard over the blades and secure it to the rear guard using the clips or screws.
- Height Adjustment: The fan's height can be adjusted from 3ft to 4ft. Loosen the height adjustment knob on the pedestal pole, set to desired height, and tighten securely.
- Power Connection: Plug the fan into a standard 220V AC power outlet.
Image: Details of the fan's height adjustment mechanism, premium flat grill design, and digital speed display with feather touch button.
Operating Instructions
Your atomberg SilenceAire Pedestal Fan can be operated using the feather-touch buttons on the unit or the included IR remote control.
Remote Control Functions
Image: The universal IR remote control, highlighting buttons for speed, timer, sleep mode, and oscillation control.
- Power Button: Turns the fan ON or OFF.
- Speed Control (1-6): Adjusts the fan speed. The fan has 6 speed options.
- Boost Mode: Activates the highest speed setting for maximum airflow.
- Timer Mode: Sets the fan to turn OFF automatically after a pre-set number of hours.
- Sleep Mode: Gradually decreases the fan's speed every two hours for comfortable sleep.
- Oscillation Control: Activates or deactivates the 90° horizontal swing function.
Manual Controls
The fan unit features feather-touch buttons for basic operation, including power and speed adjustment. The digital display indicates the current speed setting.
Adjusting Airflow Direction
- Horizontal Swing: Use the oscillation control on the remote or fan unit to activate a 90° automatic horizontal swing.
- Vertical Tilt: The fan head can be manually tilted up to 45° to direct airflow vertically. Gently adjust the fan head to the desired angle.
Image: Illustration of the fan's 90-degree horizontal swing and 45-degree manual vertical tilt capabilities, along with height adjustment.
Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your fan.
- Always unplug the fan from the power outlet before cleaning.
- Exterior Cleaning: Wipe the exterior surfaces of the fan with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Blade Cleaning: To clean the blades, carefully remove the front grill. Wipe the blades with a soft, damp cloth. Ensure blades are dry before reassembling the grill.
- Grill Cleaning: The fan grills can be cleaned with a soft brush or vacuum cleaner to remove dust buildup.
- Storage: When not in use for extended periods, store the fan in a cool, dry place, preferably in its original packaging.
Image: The fan's premium flat grill design, which can be removed for cleaning the blades.
Troubleshooting
If you encounter issues with your fan, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | Not plugged in; power outlet fault; remote battery low; power button not pressed. | Ensure fan is securely plugged in. Check power outlet with another appliance. Replace remote batteries. Press power button on fan or remote. |
| Weak airflow. | Fan speed too low; fan blades or grill are dirty. | Increase fan speed. Clean fan blades and grills as per maintenance instructions. |
| Fan makes unusual noise. | Loose parts; fan not on a level surface; obstruction in blades. | Check for loose screws or components. Place fan on a stable, level surface. Ensure no objects are obstructing the blades. |
| Remote control not working. | Batteries depleted or incorrectly inserted; obstruction between remote and fan. | Replace remote batteries, ensuring correct polarity. Remove any obstructions between the remote and the fan's sensor. |
If the problem persists after trying these solutions, please contact atomberg customer support.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | atomberg |
| Model Name | SilenceAire Hi-Speed Pedestal |
| Electric Fan Design | Floor Fan |
| Colour | Midnight Black |
| Power Source | Corded Electric |
| Wattage | 60 Watts |
| Voltage | 220 Volts |
| Number of Speeds | 6 |
| Noise Level | 57 Decibels |
| Air Flow Capacity | 110 Cubic Meters Per Minute (CMM) |
| Speed | 1250 RPM |
| Number of Blades | 3 |
| Product Dimensions (D x W x H) | 60D x 46W x 26H Centimeters |
| Item Weight | 6.35 Kilograms |
| Material Type | Plastic |
| Special Features | Inverter Compatible, Remote Controlled, BLDC Motor |
| Country of Origin | India |
Image: Illustration highlighting the energy-efficient BLDC motor, 45% energy savings, double-ball bearing, and low motor heating.
Warranty and Customer Support
Warranty Information
Your atomberg SilenceAire Hi-Speed Pedestal Fan comes with a standard warranty. Please refer to the included Warranty Card for specific terms and conditions. An additional one-year warranty can be obtained upon product registration.
Product Registration
To register your product and avail the additional warranty, please use one of the following methods:
- Email: support@atomberg.com
- Website: www.atomberg.com
- Call: 08448449442
Customer Support
For any queries, technical assistance, or service requests, please contact atomberg customer support:
- Email: support@atomberg.com
- Phone: 08448449442
- Manufacturer Address: Atomberg Technologies Pvt Ltd, Mind Space Shelters LLP/ Vithai Developers LLP, Gat No. 51-59, Village Bhamboli, Chakan, Pune, Maharashtra-410507.
Image: A general view of the atomberg SilenceAire Hi-Speed Pedestal Fan, representing product support.