FAHKNS Triple Monitor Stand Instruction Manual

1. Safety Information

Please read this manual carefully before installation and use. Keep it for future reference. Incorrect installation or use may cause damage to the product or personal injury.

• Weight Capacity: Each monitor arm supports up to 19.8 lbs (9 kg). Do not exceed this weight limit.
• Screen Size: Compatible with monitors from 17 to 32 inches.
• VESA Compatibility: Ensure your monitors have VESA mounting patterns (75x75mm or 100x100mm).
• Desk Stability: Ensure your desk is stable and strong enough to support the combined weight of the stand and three monitors.
• Pinch Points: Be aware of pinch points during assembly and adjustment. Keep hands clear of moving parts.
• Children: Keep small parts away from children.

2. Package Contents

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, please contact customer support.

• Main Pole with Base
• Monitor Arms (3 units)
• VESA Plates (3 units)
• C-Clamp Assembly
• Grommet Mount Assembly
• Hardware Kit (screws, washers, spacers)
• Tools (Allen wrenches)
• Cable Management Clips

3. Setup and Installation

The FAHKNS Triple Monitor Stand offers two installation methods: C-Clamp and Grommet Mount. Choose the method that best suits your desk.

Image: Detailed diagram illustrating the two installation methods: C-Clamp and Grommet Mount, including compatible desk thickness and grommet hole diameter.

3.1 C-Clamp Installation

1. Attach the C-clamp assembly to the bottom of the main pole.
2. Position the stand on the edge of your desk. Ensure the desk thickness is between 0.39 inches and 3.54 inches.
3. Tighten the C-clamp screw until the stand is securely fastened to the desk. Do not overtighten.

3.2 Grommet Mount Installation

1. If your desk has a grommet hole, ensure its diameter is between 0.3 inches and 2.36 inches, and the desk thickness is between 0.39 inches and 2.56 inches.
2. Attach the grommet mount assembly to the bottom of the main pole.
3. Insert the main pole through the grommet hole.
4. From underneath the desk, secure the grommet plate and tighten the nut until the stand is firmly attached.

3.3 Attaching Monitors

1. Attach the VESA plates to the back of your monitors using the provided screws. Ensure the screws are appropriate for your monitor's VESA pattern.
2. Slide the VESA plates with attached monitors onto the monitor arms. Ensure they click securely into place.
3. Adjust the tension screws on the monitor arms as needed to support the weight of your monitors and allow for smooth movement.

4. Operating and Adjustments

The FAHKNS Triple Monitor Stand allows for flexible positioning of your monitors to achieve an ergonomic setup.

Image: The monitor stand demonstrating adjustable extension and height, indicating an 11.8-inch vertical adjustment range.

4.1 Height Adjustment

• To adjust the height of the monitor arms along the main pole, loosen the collar clamp on the pole, slide the arms to the desired height, and then re-tighten the clamp.

4.2 Tilt, Swivel, and Rotation

Image: Visual representation of the monitor stand's articulation, showing tilt (+90° to -45°), swivel (180°), and rotation (360°) functions.

• Tilt: Monitors can be tilted from +90° to -45° to reduce glare and optimize viewing angles. Adjust by hand or use an Allen wrench on the tilt mechanism if it feels too loose or stiff.
• Swivel: Each monitor arm can swivel 180° horizontally, allowing you to position screens for individual or collaborative viewing.
• Rotation: Monitors can be rotated 360° from landscape to portrait orientation.
• Arm Extension: The monitor arms can be extended or retracted to bring screens closer or push them further away.

5. Cable Management

The integrated cable management system helps keep your workspace tidy and organized.

Image: A close-up view of the monitor stand's cable management clips, demonstrating how power and video cables can be routed along the arms and pole for a clean setup.

• Route your monitor power and video cables through the provided cable clips located along the monitor arms and the main pole.
• Ensure cables have enough slack to allow for full range of motion of the monitor arms without tension.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your monitor stand.

• Cleaning: Wipe the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents.
• Check Connections: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary.
• Lubrication: No lubrication is typically required for the moving parts. If movement becomes stiff, ensure no debris is obstructing the joints.

7. Troubleshooting

If you encounter issues with your FAHKNS Triple Monitor Stand, refer to the following common problems and solutions.

• Monitors are not level: Adjust the height of individual VESA plates or fine-tune the arm positions. Ensure all monitors are of similar weight if possible.
• Monitor sags or does not stay in position: Tighten the tension screw on the monitor arm's joint. Refer to the assembly instructions for specific adjustment points.
• Stand feels unstable: Ensure the C-clamp or grommet mount is securely tightened to the desk. Verify the desk surface is flat and sturdy.
• Difficulty moving arms: Check for any obstructions. Loosen tension screws slightly if movement is too stiff.

8. Specifications

9. Warranty and Support

The FAHKNS Triple Monitor Stand (Model 147112-6) comes with a 1-Year Limited Warranty from the date of purchase.

This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, modifications, or unauthorized repairs.

For warranty claims, technical support, or any questions regarding your product, please contact FAHKNS customer service through the retailer where the product was purchased or visit the official FAHKNS website for contact information.

Please have your model number (147112-6) and proof of purchase ready when contacting support.