Diivoo 4 Zone Sprinkler Timer with Brass Inlet Instruction Manual

1. Introduction

The Diivoo 4 Zone Sprinkler Timer is designed to automate your garden and lawn watering, providing efficient and customizable irrigation. Featuring a durable brass inlet and IP68 waterproof rating, this timer ensures reliable outdoor performance. It allows for independent scheduling across four zones, offering flexibility for various watering needs. The large display provides clear visibility of watering plans and battery status, while rain delay and manual watering functions offer additional control.

Image 1: Overview of the Diivoo 4 Zone Sprinkler Timer, highlighting its multi-zone capability and digital display.

2. Setup

2.1. Battery Installation

1. Locate the battery compartment on the back of the timer.
2. Open the battery cover. Note the sealing ring designed to prevent water ingress.
3. Insert 4 x AA alkaline batteries (not included), ensuring correct polarity (+/-).
4. Securely close the battery cover, tightening any screws to maintain the IP68 waterproof seal.

Video 1: Demonstrates the battery installation process and initial setup of the Diivoo 4 Zone Sprinkler Timer.

2.2. Connecting to Faucet

1. Ensure the faucet is clean and free of debris.
2. If your faucet is 1/2", install the provided 1/2" washer into the 1/2" inlet adapter, then connect to the water timer and faucet. For 3/4" faucets, simply connect the water timer directly to the faucet.
3. Hand-tighten the brass inlet connector to the outdoor faucet. Do not overtighten.
4. Open the faucet fully to allow water flow to the timer.

Image 2: Highlights the durable brass inlet and IP68 waterproof design, crucial for secure faucet connection.

2.3. Connecting Hoses

1. Attach your garden hoses to the four independent outlets at the bottom of the timer.
2. Ensure each hose connection is secure to prevent leaks.

Image 3: Illustrates the four irrigation zones and how hoses connect to the timer outlets.

3. Operating Instructions

The Diivoo 4 Zone Sprinkler Timer features a user-friendly dial and large LCD screen for easy programming. Follow these steps to set up your watering schedule.

Video 2: A comprehensive guide on how to set up and program your Diivoo Water Timer.

3.1. Setting the Clock

1. Turn the dial to SET CLOCK.
2. Use the +/- buttons to adjust the current time. Hold the button for quick adjustment.
3. Press the ZONE button to switch between 12H and 24H format if needed.

3.2. Setting Start Time

1. Turn the dial to START TIME.
2. Press the ZONE button to select the desired outlet (Zone 1/2/3/4) you want to program.
3. Use the +/- buttons to set the time you want watering to begin.

3.3. Setting Watering Duration (How Long)

1. Turn the dial to HOW LONG.
2. Press the ZONE button to select the desired outlet (Zone 1/2/3/4).
3. Set the watering duration from 0 to 240 minutes using the +/- buttons.

3.4. Setting Watering Frequency (How Often)

1. Turn the dial to HOW OFTEN.
2. Press the ZONE button to select the desired outlet (Zone 1/2/3/4).
3. Set the watering frequency (every 6/12 hours or every 1-7 days) using the +/- buttons.

Image 4: The large LCD screen clearly displays all watering schedule information for easy programming.

3.5. Auto Watering

1. After setting the clock, start time, duration, and frequency for each desired zone, turn the dial to AUTO.
2. Ensure your garden faucet is turned on.
3. The water timer will now operate according to your programmed schedule.

3.6. Manual Watering

This feature allows for instant watering without interrupting pre-set programs.

1. Turn the dial to AUTO.
2. Press the MANUAL button.
3. Press the ZONE button to select which outlet (Zone 1/2/3/4) you want to water.
4. Use the +/- buttons to select the watering time, from 0 to 240 minutes.
5. To stop manual watering, press the MANUAL button again, or turn the dial to OFF and then back to AUTO.

Image 5: A user manually watering plants, demonstrating the manual watering feature.

3.7. Rain Delay

The rain delay function helps conserve water by postponing watering on rainy days.

1. Turn the dial to AUTO.
2. Press and hold the + / DELAY button for 2 seconds to select a delay of 1-7 days.
3. The screen will show the days remaining before the programmed cycle resumes.
4. To remove the rain delay, press and hold the + / DELAY button for 2 seconds again, or turn the dial to OFF and then back to AUTO.

Image 6: The timer displaying the rain delay function, showing days remaining before watering resumes.

3.8. Turning Off a Single Zone

1. Turn the dial to START TIME.
2. Press the ZONE button to select the outlet (Zone 1/2/3/4) you want to turn off.
3. Use the +/- buttons to set the start time to OFF. If using 24-hour format, OFF is between 23:59 and 00:00. If using 12-hour format, OFF is between 11:59 PM and 12:00 AM.
4. Turn the dial back to AUTO.

4. Maintenance

4.1. Battery Replacement

When the battery icon on the screen flashes, it indicates low battery. Replace the 4 x AA alkaline batteries promptly to ensure continuous operation. The valve will automatically close to prevent overflow if batteries are critically low.

4.2. Cleaning the Filter

Periodically check the filter located within the brass inlet for any debris. Clean it as needed to maintain optimal water flow and prevent blockages.

4.3. Winterization

Before freezing temperatures occur, disconnect the timer from the faucet and hoses. Remove the batteries and store the timer in a dry, frost-free location to prevent damage.

5. Troubleshooting

• No Water Flow: Ensure the faucet is fully open. Check battery levels. Verify that the watering schedule is correctly programmed and not in OFF or Rain Delay mode. Inspect the filter for clogs.
• Water Leaks: Ensure all connections (faucet, hoses) are hand-tightened. Check that washers and O-rings are properly seated and not damaged. If leaks persist, apply PTFE tape to the faucet threads before attaching the timer.
• Timer Not Responding: Replace batteries with fresh ones. Ensure the dial is set to a valid mode (e.g., AUTO, SET CLOCK).
• Incorrect Time/Schedule: Re-set the clock and verify all programmed watering parameters (start time, duration, frequency) for each zone.

6. Specifications

• Model: DI-WT23M1
• Brand: Diivoo
• Color: Green
• Outlets: 4 Zones
• Inlet: Brass
• Waterproof Rating: IP68
• Pressure Range: 7.25-116 PSI
• Watering Duration: 0-240 minutes
• Watering Frequency: Every 6/12 hours or every 1-7 days
• Power Source: 4 x AA Alkaline Batteries (not included)
• Product Dimensions: 8.19"D x 5.87"W x 4.02"H
• Item Weight: 1.6 Pounds

7. Warranty & Support

For warranty information or technical support, please refer to the product packaging or contact Diivoo customer service directly. Keep your purchase receipt for warranty claims.