HIGH GODO Transforming Building Set (Model 7814) Instruction Manual

1. Introduction

This manual provides detailed instructions for assembling and operating your HIGH GODO 2-in-1 Transforming Building Set. This kit allows you to construct a robot model that can transform into a truck, offering two distinct display or play modes. The set contains 688 pieces designed for teens and adults aged 14 and above.

2. Safety Information

WARNING: CHOKING HAZARD - Small Parts. Not suitable for children under 3 years. This product contains small parts which may pose a choking hazard. Adult supervision is recommended during assembly.

3. Setup and Assembly

The HIGH GODO Transforming Building Set requires assembly. Follow the included instruction manual carefully for step-by-step guidance.

3.1 Unpacking and Preparation

• Open the packaging and carefully remove all building block bags and the instruction booklet.
• Organize the pieces by color and type to facilitate easier assembly.
• Ensure all 688 pieces are present. Refer to the parts list in the included instruction manual.

3.2 Building the Model

This set allows for the construction of two primary forms: a robot and a truck. The transformation between these modes involves reconfiguring the same set of blocks.

Step-by-step instructions are provided in the physical instruction manual included with your set. Follow these diagrams precisely.

Figure 3.1: This image illustrates the two primary configurations of the building set: a fully assembled truck and a fully assembled robot, along with an intermediate transformation stage. The set allows for free transformation between these modes.

Figure 3.2: A person engaged in the assembly process of the HIGH GODO transforming robot model, demonstrating the hands-on building experience.

Figure 3.3: Detailed views of the robot mode highlight the intricate design of the front end and the robust construction of the base, ensuring stability for display.

4. Operating Instructions: Transformation

The HIGH GODO Transforming Building Set is designed for dynamic transformation between its robot and truck modes. This process involves reconfiguring the building blocks.

4.1 Transforming from Truck to Robot Mode

1. Begin with the model in its complete truck configuration.
2. Carefully detach and re-position the cab section to form the robot's torso and head.
3. Extend the side panels and wheels to form the robot's arms and legs.
4. Adjust the joints to achieve the desired robot pose.
5. Attach any accessories, such as the laser gun, to the robot's hands.

4.2 Transforming from Robot to Truck Mode

1. Start with the model in its complete robot configuration.
2. Detach any accessories and set them aside.
3. Fold the robot's limbs and torso back into the compact truck form.
4. Ensure all sections align correctly to form the truck's chassis, cab, and trailer bed.
5. Verify that all wheels are properly aligned and functional.

Refer to the detailed diagrams in the included instruction manual for specific transformation sequences and joint movements.

Figure 4.1: This image displays the robot in its standing form, alongside a diagram indicating its height (28.1cm/11.1in) and width (20.3cm/8in), providing a clear understanding of its assembled size.

Figure 4.2: Detailed views of the truck mode highlight features such as the dual exhaust pipes and the wide tire design, contributing to the model's realistic appearance.

Figure 4.3: The fully assembled robot model is shown on display, demonstrating its aesthetic appeal and stability.

5. Maintenance

5.1 Cleaning

To clean the building set, gently wipe the pieces with a dry, soft cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive cleaners.

5.2 Storage

Store the building set in a cool, dry place away from direct sunlight to prevent material degradation or discoloration. Keep small parts in a designated container to avoid loss.

6. Troubleshooting

6.1 Missing Parts

If you discover any missing parts during assembly, please contact HIGH GODO customer service. Provide clear details about the missing component, including its shape, color, and the step number where it is required.

6.2 Difficulty with Assembly

If you encounter difficulties during assembly, re-examine the instruction manual's diagrams for the current step. Ensure all pieces are correctly oriented and firmly connected. Building blocks require precise alignment.

6.3 Model Instability

If the assembled model feels unstable, check all connections, especially at joints and load-bearing points. Ensure all blocks are fully pressed together.

7. Specifications

8. Warranty and Support

8.1 After-sales Service

For any issues, including missing parts or assembly difficulties, please contact HIGH GODO customer service. We are committed to resolving any problems you may encounter with your product.

8.2 Contact Information

Please refer to the contact details provided in the product packaging or on the official HIGH GODO website for support.