Introduction
This manual provides detailed instructions for the proper use and care of your Zoop Naruto Ana-Digi Watch, Model 16053PP01. This timepiece combines both analog and digital displays, offering versatile timekeeping functions. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.
Product Features
The Zoop Naruto Ana-Digi Watch is designed with several key features:
- Ana-Digi Function: Combines traditional analog hands with a digital display for versatile time reading.
- Dedicated Push Buttons: Multiple buttons for easy access and control of various digital functions.
- Stainless Steel Crown: Durable crown for setting analog time.
- Skin-Friendly Silicon Strap: Comfortable and durable strap featuring Naruto Uzumaki and Kakashi Hatake printed designs.
- Water Resistance: Rated for 5 ATM (50 meters), suitable for everyday activities like hand washing and light rain exposure. Not suitable for swimming or diving.
- Case Dimensions: Case size of 45.60mm x 49.80mm and a thickness of 15.60mm.
- Buckle Lock Mechanism: Secure and adjustable strap closure.
Image: Overview of the watch highlighting its key features including Ana-Digi function, push buttons, stainless steel crown, and printed silicon strap.
Setup Instructions
Setting Analog Time
- Pull the crown (located on the right side of the watch case) outwards to the first click position.
- Rotate the crown clockwise or counter-clockwise to adjust the analog hour and minute hands to the desired time.
- Once the analog time is set, push the crown back into its normal position to start the watch movement.
Setting Digital Time and Date
The digital display is controlled by the push buttons on the watch case. Refer to the image below for button identification.
Image: Side view of the watch, illustrating the position of the crown and the various push buttons used for digital functions.
- Press the MODE button (typically bottom-left) repeatedly to cycle through the digital modes: Time, Alarm, Stopwatch, Date.
- When in the Time display mode, press and hold the SET button (typically top-left) until the seconds begin to flash. This indicates setting mode.
- Press the MODE button to cycle through the settings: Seconds, Hour, Minute, Year, Month, Day.
- Use the ADJ button (typically top-right) to increase the flashing value. Use the LIGHT button (typically bottom-right) to decrease the value (if applicable, or to switch between 12/24 hour format).
- Once all settings are adjusted, press the SET button again to exit the setting mode.
Operating Instructions
Your watch offers several digital functions. The labels on the watch face indicate the primary function of each button in different modes.
Image: Front view of the watch, displaying the analog and digital time, and indicating the functions of the four push buttons: SET, MODE, ADJ, and LIGHT.
Using the Digital Display
- Time Mode: Displays current digital time (hours, minutes, seconds) and day of the week.
- Alarm Mode:
- Press MODE until "ALARM" or "AL" appears.
- Press and hold SET to enter alarm setting mode.
- Use MODE to select hour or minute. Use ADJ to change the value.
- Press SET to confirm.
- Press ADJ in Alarm Mode to toggle the alarm ON/OFF. An alarm icon will appear when active.
- Stopwatch Mode:
- Press MODE until "CHRONO" or "ST" appears.
- Press ADJ to start/stop the stopwatch.
- Press SET to reset the stopwatch to zero when stopped.
- Light Function: Press the LIGHT button (bottom-right) to illuminate the digital display for a few seconds in low-light conditions.
Maintenance
Water Resistance
Your Zoop Naruto Ana-Digi Watch is water-resistant up to 5 ATM (50 meters). This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water, such as during hand washing. It is not designed for swimming, diving, or showering, as prolonged exposure to water pressure or steam can compromise the seals.
- Do not operate the crown or push buttons when the watch is wet or submerged.
- Ensure the crown is fully pushed in after setting the time to maintain water resistance.
Cleaning Your Watch
To clean your watch, wipe the case and strap with a soft, damp cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish or strap material.
Battery Replacement
The watch uses a battery for power. When the digital display fades or the watch stops functioning, the battery may need replacement. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance. Attempting to replace the battery yourself may void the warranty and compromise the watch's integrity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Analog hands not moving | Crown is pulled out; battery depleted. | Push the crown back in. If still not moving, battery may need replacement by a professional. |
| Digital display is blank or dim | Battery depleted. | Battery needs replacement by a professional. |
| Digital time is incorrect | Time not set correctly; accidental button press. | Refer to "Setting Digital Time and Date" section to reset the time. |
| Watch fogging up internally | Exposure to extreme temperature changes; compromised water resistance. | Avoid extreme temperature changes. If fogging persists, seek professional inspection as water resistance may be compromised. |
Specifications
| Brand | Zoop |
| Model Number | 16053PP01 |
| Model Name | Naruto |
| Display Type | Analog-Digital |
| Case Material | Not specified (typically resin/plastic for this type of watch) |
| Strap Material | Silicon |
| Case Dimensions (LxWxH) | 50 x 46 x 16 Millimeters (approx. 45.60mm x 49.80mm case size) |
| Case Thickness | 15.60 mm |
| Item Weight | 200 g |
| Water Resistance Depth | 50 Meters (5 ATM) |
| Batteries Included | Yes |
| Batteries Required | Yes |
| Battery Cell Composition | Other Than Listed (typically Lithium or Silver Oxide) |
| Country of Origin | India |
Image: The watch displayed with a ruler, indicating a case diameter of approximately 45.60 mm.
Warranty and Support
For warranty information and customer support regarding your Zoop Naruto Ana-Digi Watch, please refer to the warranty card included with your purchase or visit the official Zoop by Titan website. You may also contact the retailer where the watch was purchased for assistance.
Manufacturer: Titan Company Limited, #3, Sipcot Industrial Complex, Hosur, Tamil Nadu - 635126, India.