1. Introduction
The X-Sense Wireless Combination Smoke and Carbon Monoxide Detector, Model XP0H-WN, provides essential dual protection for your home. This device is designed to detect both smoke and carbon monoxide (CO), offering comprehensive safety with a single unit. Featuring a 10-year non-replaceable battery and wireless interconnection capabilities for up to 24 X-Sense Link+ devices, it ensures that all alarms sound together, providing faster alerts throughout your home. This detector is certified to UL 217 9th Edition standards, ensuring reliable performance.
The X-Sense detector installed on a ceiling, prominently displaying its certification to UL 217 9th Edition and ETL Listed Intertek compliance.
2. Safety Information
WARNING: Actuation of your CO Alarm indicates the presence of Carbon Monoxide (CO) which can kill you.
In case of a CO alarm:
- Operate the TEST/HUSH button.
- Call your emergency services (Fire Dept. or 911).
- Immediately move to fresh air - outdoors or by an open door/window. Do a head count to check that all persons are accounted for. Do not re-enter the premises nor move away from the open door/window until the emergency services responders have arrived, the premises has been aired out, and your alarm remains in its normal condition.
- After following steps 1-3, if your alarm reactivates within a 24-hour period, repeat steps 1-3 and call a qualified appliance technician to investigate for sources of CO from fuel-burning equipment and appliances, and inspect for proper operation of this equipment. If problems are identified during this inspection, have the equipment serviced immediately. Note any combustion inspection not inspected by the technician and consult the manufacturer's instructions, or contact the manufacturer directly for more information about CO safety and this equipment. Make sure that motor vehicles are not, and have not been, operating in an attached garage or adjacent to the residence.
Always ensure proper placement and regular testing of your detector to maintain optimal safety.
3. Product Overview
Key Features:
- 2-in-1 Protection: Detects both smoke and carbon monoxide.
- 10-Year Sealed Battery: Long-lasting, non-replaceable lithium battery for a decade of protection.
- Wireless Interconnection: Connects up to 24 X-Sense Link+ devices for simultaneous alerts.
- Voice Location Feature: Clearly identifies the location of the threat (if supported by interconnected system).
- Large Mounting Bracket: Oversized 5.7-inch (145 mm) bracket for neat installation.
- Remote Control Compatibility: Test or silence alarms with a remote (sold separately).
- Certified: Meets UL 217 9th Edition standards.
Components:
- Smoke and Carbon Monoxide Alarm (XP0H-WN)
- Mounting Bracket
- Test/Hush Button
- Smoke Inlets
- Digital Display (for CO levels)
- LED Indicators (Power, Alarm, Fault)
Front view of the X-Sense Wireless Combination Smoke and Carbon Monoxide Detector, showing its compact design and digital display.
4. Setup and Installation
The X-Sense XP0H-WN detector is designed for easy installation. The package includes all necessary mounting hardware.
What's in the Box:
- 1 × Smoke and Carbon Monoxide Alarm XP0H-WN
- 1 × User Manual
- 2 × Screws and Anchor Plugs
The complete set of items included with the X-Sense detector: the device, packaging, user manual, and installation hardware.
Installation Steps:
- Choose Location: Select a central location on the ceiling or wall, away from corners, windows, and vents. Refer to local codes for specific placement requirements.
- Mounting Bracket: Use the provided screws and anchor plugs to securely attach the large 5.7-inch (145 mm) mounting bracket to the ceiling or wall. This oversized bracket helps cover existing screw holes or ceiling marks from previous alarms for a cleaner look.
- Attach Detector: Align the detector with the mounting bracket and twist clockwise until it locks securely into place.
- Activate Battery: The 10-year sealed lithium battery is pre-installed. The device should activate automatically upon installation.
- Test Device: Press the TEST/HUSH button to ensure the alarm is functioning correctly.
A hand installing the X-Sense detector, highlighting the large mounting bracket (5.7 inches / 145 mm) designed for easy and neat installation.
5. Operation
Testing the Alarm:
Regularly test your detector to ensure it is working properly. Press and hold the TEST/HUSH button on the front of the unit. The alarm will sound, and the LED indicators will flash. Release the button to stop the test. Perform this test weekly.
Silencing the Alarm:
In case of a nuisance alarm (e.g., from cooking smoke), press the TEST/HUSH button to temporarily silence the alarm. The alarm will enter a temporary hush period, typically for several minutes, before resetting. If the smoke or CO concentration remains high, the alarm will reactivate.
Wireless Interconnection:
The XP0H-WN supports wireless interconnection with up to 24 compatible X-Sense Link+ devices. When one interconnected alarm detects smoke or CO, all other connected alarms will sound simultaneously. This feature ensures that everyone in your home is alerted quickly, regardless of their location.
An illustrative diagram depicting how all interconnected X-Sense alarms activate together when one detects a threat, ensuring widespread alert.
A remote control (sold separately) can be used to test or silence all interconnected alarms without needing to reach each unit individually.
6. Maintenance
Battery:
The X-Sense XP0H-WN is equipped with a 10-year sealed lithium battery. This battery is non-replaceable and designed to power the unit for its entire 10-year lifespan. No battery replacement is required during the product's operational life.
A detailed image emphasizing the X-Sense detector's 10-year non-replaceable battery for long-term, uninterrupted protection.
Cleaning:
Clean your detector regularly to prevent dust and debris from interfering with its sensors. Use a soft, damp cloth to wipe the exterior. Do not use cleaning solvents or spray directly onto the unit. Vacuum around the alarm's vents with a soft brush attachment to remove dust and dirt.
7. Troubleshooting
If your alarm is sounding or indicating a fault, refer to the following general guidelines:
- False Alarm: If the alarm sounds due to cooking smoke or steam, press the TEST/HUSH button to silence it. Ensure proper ventilation in the area.
- Persistent Alarm: If the alarm continues to sound after silencing or reactivates quickly, follow the safety instructions in Section 2 immediately.
- Fault Indication: If the unit indicates a fault (e.g., specific LED pattern or chirp), consult the full user manual for detailed fault codes and recommended actions. This may indicate a sensor issue or end-of-life.
- Interconnection Issues: Ensure all interconnected devices are within range and properly paired. Refer to the full user manual for pairing instructions.
For detailed troubleshooting steps, please consult the comprehensive user manual included with your product or visit the X-Sense support website.
8. Specifications
| Specification | Detail |
|---|---|
| Brand | X-Sense |
| Model Number | XP0H-WN |
| Style | RF Interconnected Model (1-Pack) |
| Power Source | Battery Powered |
| Battery Type | 10-Year Sealed Lithium Metal (Nonstandard Battery, included) |
| Alarm Type | Audible |
| Sensor Type | Electrochemical (CO), Photoelectric (Smoke) |
| Material | Heat-Resistant PC Plastic Material |
| Item Weight | 13.7 ounces |
| Product Dimensions | 5.71 x 5.71 x 1.97 inches |
| Interconnection | Up to 24 X-Sense Link+ Devices |
| Certifications | UL 217 9th Edition, ETL Listed Intertek |
9. Warranty and Support
For warranty information, technical support, or any inquiries regarding your X-Sense XP0H-WN detector, please contact X-Sense customer service.
Customer Service Email: support@x-sense.com
Please retain your purchase receipt for warranty purposes.
