Introduction
This manual provides instructions for the uehba replacement remote control, designed for use with specific Lasko Ceramic Tower Space Heater models. This remote control offers a direct replacement solution, requiring no programming for immediate use.
Image: The uehba replacement remote control (left, new design) is compatible with the original Lasko remote control (right, old model).
Setup
1. Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards or outwards to open.
- Insert two (2) AAA 1.5V alkaline batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
- Replace the battery cover by sliding it back into position until it clicks securely.
Image: The battery compartment requires two AAA batteries (not included).
2. Initial Use
This replacement remote control is designed to work immediately with compatible Lasko Ceramic Tower Space Heaters without any programming or setup. Simply install the batteries, and it is ready for use.
Image: The remote control functions instantly upon battery installation, requiring no programming.
Operating Instructions
The remote control utilizes infrared (IR) technology. Ensure a clear line of sight between the remote control and the Lasko Ceramic Tower Space Heater for optimal performance. The maximum effective range is approximately 10 meters.
Button Functions:
- Power Button: Turns the heater ON or OFF.
- Temperature Control (+/-): Adjusts the desired temperature setting.
- Mode/Function Button: Cycles through heating modes or fan settings.
- Timer Button: Sets or adjusts the heater's operational timer.
- Oscillation Button: Activates or deactivates the heater's oscillation function.
Image: The remote control features clearly labeled buttons for various heater functions.
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's performance diminishes or if it stops responding. Always replace both batteries simultaneously with new AAA alkaline batteries.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
Troubleshooting
Remote Control Not Responding:
- Check Batteries: Ensure batteries are inserted correctly with the proper polarity. Replace old or depleted batteries with new AAA alkaline batteries.
- Line of Sight: Verify there is a clear path between the remote control and the heater's infrared receiver. Obstructions can block the signal.
- Distance: Ensure you are within the effective operating range (approximately 10 meters) of the heater.
- Heater Power: Confirm that the Lasko heater is plugged in and powered on.
Specifications
| Brand | uehba |
| Model Number | ABCD |
| Compatible Devices | Lasko Ceramic Tower Space Heaters (CT22835, CT32990C, CT32791, CT22840) |
| Connectivity Technology | Infrared (IR) |
| Controller Type | Button Control |
| Maximum Range | 10 meters |
| Batteries Required | 2 x AAA 1.5V Alkaline (not included) |
| Product Dimensions (L x W x H) | 9.98 x 4.19 x 1.37 cm |
| Item Weight | 21 g |
| Color | Black |
Warranty and Support
For any questions or support regarding your uehba replacement remote control, please refer to the retailer or manufacturer's customer service channels. Specific warranty details may vary by purchase location.