Introduction
Thank you for choosing the Vexilar C8 Corded Upright Vacuum Cleaner. This appliance is designed for efficient and thorough cleaning of various surfaces in your home. With its powerful 600W motor, 70KPa suction, and versatile features, the Vexilar C8 provides a reliable cleaning solution. Please read this manual carefully before use to ensure proper operation, maintenance, and safety.
The Vexilar C8 Corded Upright Vacuum Cleaner, ready for use.
Setup
Follow these steps to assemble your Vexilar C8 vacuum cleaner:
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the packing list are present and undamaged.
- Assemble Main Unit: Connect the main body of the vacuum cleaner to the telescopic tube. Ensure it clicks securely into place.
- Attach Floor Brush: Connect the floor brush to the bottom of the telescopic tube. Ensure a firm connection.
- Cable Management: Unwind the 7-meter power cable. Utilize the integrated cable hooks on the vacuum for tidy storage when not in use.
The 7-meter power cable provides extensive reach, with integrated hooks for organized storage.
The Vexilar C8 features a self-standing design, allowing it to stand upright independently for convenient storage without needing to lean against a wall or require drilling for mounting.
The self-standing design offers practical and space-saving storage.
Operating Instructions
The Vexilar C8 is designed for ease of use and powerful cleaning.
Powering On and Suction Modes
- Plug the power cable into a suitable electrical outlet.
- Press the power button to turn on the vacuum cleaner.
- Select between two suction levels: Standard Mode for daily cleaning on hard floors and High Power Mode for deep cleaning on carpets or heavily soiled areas.
Experience extreme power with 70,000 Pa suction for various cleaning tasks.
Using the Floor Brush and LED Lights
The main floor brush features high-visibility green LED lights that illuminate fine dust and hidden dirt under furniture and in corners, ensuring no spot is missed.
The LED lights reveal hidden dust for a more precise clean.
Versatile Accessories
The Vexilar C8 comes with several accessories to tackle different cleaning needs:
- Telescopic Tube: Adjust the length of the tube to comfortably clean high areas, ceilings, or under furniture.
- Furniture Brush: Ideal for cleaning delicate surfaces, upholstery, and furniture.
- Crevice Tool: Perfect for reaching tight spaces, corners, and edges.
The telescopic design allows for easy adjustment to clean various heights and hard-to-reach areas.
Utilize the crevice tool for narrow spaces and the upholstery tool for fabrics.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your Vexilar C8.
Emptying the Dust Container
The 1.5-liter dust container allows for extended cleaning sessions. To empty:
- Ensure the vacuum is unplugged.
- Press the one-button release mechanism to detach the dust container.
- Empty the contents into a trash bin.
- Reattach the dust container securely.
The large 1.5L dust container is easily emptied with a single button.
Cleaning the Filtration System
The 6-level sealed filtration system, including a HEPA filter, reduces dust dispersion. Clean filters regularly to maintain optimal airflow and suction.
- Remove the dust container.
- Carefully remove the filters from the dust container.
- Tap off loose dirt and rinse the filters under cold running water. Do not use detergents.
- Allow filters to air dry completely for at least 24 hours before reassembling. Do not use the vacuum with wet filters.
The 6-level HEPA Lock™ filtration system traps 99% of dust.
Cleaning the Anti-Tangle V-Roller Brush
The V-shaped roller brush with a comb structure is designed to reduce hair tangling. Periodically check and clean the brush roll:
- Ensure the vacuum is unplugged.
- Detach the floor brush from the telescopic tube.
- Remove any tangled hair or debris from the brush roll using scissors or a brush cleaning tool.
- Ensure the brush roll spins freely before reattaching.
The anti-tangle V-roller brush improves cleaning efficiency and reduces maintenance.
Troubleshooting
If you encounter issues with your Vexilar C8, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Loss of Suction | Full dust container, clogged filters, blocked hose/brush. | Empty dust container. Clean or replace filters. Check for and remove any blockages in the hose or brush roll. |
| Vacuum Stops During Use | Overheating protection activated (especially on thick carpets). | Unplug the device and allow it to cool down for at least 15 minutes before resuming use. Ensure filters are clean. |
| Brush Roll Not Spinning | Hair or debris tangled in the brush roll, blockage. | Unplug the vacuum. Remove the floor brush and clear any obstructions from the brush roll. |
| Unusual Noise | Foreign object in the brush roll or hose, motor issue. | Unplug the vacuum and check for any foreign objects. If the noise persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Vexilar |
| Model Name | C8 |
| Power Source | Corded Electric |
| Electric Power | 600 Watts |
| Suction Power | Up to 70 KPa |
| Number of Power Levels | 2 |
| Filter Type | HEPA Filter (6-level filtration system) |
| Dust Container Capacity | 1.5 Liters |
| Power Cable Length | 7 meters |
| Item Weight | 1.69 Kilograms |
| Item Dimensions (LxWxH) | 23L x 12l x 25H cm |
| Recommended Surfaces | All floor types, Carpets |
| Special Features | LED front light, Anti-tangle V-brush, Self-standing design, Telescopic tube, Thermal protection |
| Voltage | 220 Volts |
Warranty Information
The Vexilar C8 Corded Upright Vacuum Cleaner comes with a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or failure to follow the instructions in this manual. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, technical assistance, or warranty claims, please contact our customer support team. Vexilar provides post-sales service in several European countries.
Email: service-it@vactidy.com
Our customer service is available Monday to Friday.