Devoko Height-Adjustable Desk User Manual

1. Introduction

Thank you for choosing the Devoko Height-Adjustable Desk. This desk is designed to promote a healthier work environment by allowing you to easily switch between sitting and standing positions. This manual provides detailed instructions for assembly, operation, and maintenance to ensure safe and efficient use of your new desk.

The Devoko Height-Adjustable Desk offers quiet operation, robust build quality, and intelligent features for an improved workspace.

2. Safety Instructions

• Read all instructions carefully before assembly and operation.
• Keep children and pets away from the desk during operation.
• Ensure all cables are properly managed to prevent tripping hazards or damage during height adjustment.
• Do not overload the desk. Refer to the specifications for maximum load capacity.
• Avoid placing liquids directly on the control panel or near electrical components.
• If any unusual noise or movement occurs, immediately stop operation and unplug the power cord.
• Only use the provided power adapter and components.

3. Package Contents

Please verify that all components are present before beginning assembly. The tabletop is divided into three parts for easier handling and assembly.

An overview of all parts included in the package. The tabletop is split into three sections.

• Desk Frame (Legs and Crossbar)
• Tabletop (3 sections)
• Control Panel with Memory Functions
• Motor and Power Adapter
• Cable Management Tray
• Headphone Hook
• Assembly Hardware (screws, tools)
• User Manual

4. Setup and Assembly

Assembly typically takes about 30 minutes. It is recommended to have two people for assembly, especially when handling the tabletop.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Assemble Desk Frame: Attach the legs to the crossbar using the provided hardware. Ensure all connections are secure.
3. Install Motor and Control Box: Mount the motor and control box to the designated positions on the desk frame. Connect the motor cables to the control box.
4. Attach Tabletop: Carefully place the three tabletop sections onto the assembled frame. Align the pre-drilled holes and secure the tabletop sections to the frame using the provided screws.
5. Mount Control Panel: Attach the control panel to the underside of the tabletop in a convenient location. Connect its cable to the control box.
6. Install Cable Tray and Hook: Mount the foldable cable management tray and the headphone hook as desired.
7. Connect Power: Plug the power adapter into the control box and then into a wall outlet.

5. Operating Instructions

The Devoko Height-Adjustable Desk features an intuitive control panel for easy height adjustments and memory settings.

The control panel allows for electric height adjustment, 2-position memory, and an automatic reset function.

5.1 Height Adjustment

• Up/Down Buttons: Press and hold the Up or Down arrow buttons to raise or lower the desk to your desired height. The desk moves at a lifting speed of 22mm/s.

5.2 Memory Functions

• Setting Memory Positions: Adjust the desk to your preferred sitting or standing height. Press and hold one of the memory buttons (1 or 2) until you hear a beep or see a confirmation on the display (if available). The current height is now saved to that position.
• Recalling Memory Positions: Press the corresponding memory button (1 or 2) to automatically move the desk to the saved height.

5.3 Automatic Reset Function

• If the desk encounters an error or needs to be reset, press and hold the A button (or indicated reset button) until the desk completes its reset cycle and returns to its initial lowest position.

5.4 Anti-Collision System

• The desk is equipped with an intelligent anti-collision system. If the desk encounters an obstacle during height adjustment, it will automatically stop and reverse slightly to prevent damage.

6. Maintenance

• Cleaning: Wipe the desk surface and frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Cable Management: Periodically check and organize cables to ensure they are not pinched or tangled, especially during height adjustments.
• Inspections: Regularly inspect all screws and connections to ensure they remain tight. Retighten if necessary.
• Motor Care: The durable motors are designed for long-term use (over 10,000 cycles). No special motor maintenance is required.

7. Troubleshooting

8. Specifications

The desk offers a height adjustment range from 71cm to 119cm to accommodate various user preferences.

• Model Number: MW-1021-BE-160-WT
• Dimensions (L x W x H): 160 x 70 x 71-118 cm (Product dimensions: 70 x 160 x 71 cm; Item dimensions D x W x H: 160P x 72l x 70H centimeters)
• Minimum Height: 73 cm
• Maximum Height: 118 cm
• Weight: 25.5 Kilograms
• Recommended Maximum Load: 85 Kilograms (Static load capacity)
• Dynamic Load Capacity: 70 Kilograms
• Material: Industrial-grade Steel Frame, Tabletop (material not specified, typically particle board or MDF)
• Color: White
• Noise Level: < 50 dB
• Lifting Speed: 22 mm/s
• Special Features: Height Adjustable, 2-Function Memory, Anti-Collision System, Cable Tray, Headphone Hook
• Assembly Required: Yes

The desk is tested for durability with a 70kg load capacity over 20,000 lifts.

The desk operates quietly, with noise levels below 50 dB, comparable to light rain.

9. Warranty and Support

For warranty information, technical support, or to order replacement parts, please contact Devoko customer service through their official website or the retailer where the product was purchased. Please have your model number (MW-1021-BE-160-WT) and purchase date available when contacting support.