SERWALL SW-Expandable Dining-TSL-9-Grey-New

SERWALL HDPE Outdoor Dining Set Instruction Manual

Model: SW-Expandable Dining-TSL-9-Grey-New

Brand: SERWALL

1. Introduction

Thank you for choosing the SERWALL HDPE Outdoor Dining Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new dining set. Please read it thoroughly before use and retain it for future reference.

This 9-piece set includes an expandable dining table and 8 textilene chairs, designed for outdoor use. The table features an aluminum frame and HDPE tabletop, while the chairs combine textilene fabric seats with HDPE frames, ensuring durability and weather resistance.

SERWALL HDPE Outdoor Dining Set in Grey

Image: The complete SERWALL HDPE Outdoor Dining Set, featuring an expandable table and 8 chairs, set up in an outdoor patio environment.

2. Safety Information

  • Always assemble the product on a soft, clean surface to prevent damage.
  • Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
  • Do not exceed the weight capacity: Table 220 lbs, Chairs 330 lbs per seat.
  • Keep children away from the assembly area. Small parts can be a choking hazard.
  • Use caution when extending or retracting the table to avoid pinching fingers.
  • Place the dining set on a level surface to prevent tipping.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

  • 1 x Expandable Dining Table
  • 8 x Textilene Dining Chairs
  • 1 x Umbrella Hole Cover
  • Assembly Hardware Kit (Stainless Steel)
  • Instruction Manual
Components of SERWALL HDPE Outdoor Dining Set

Image: An overhead view of the SERWALL dining set, showing the table and eight chairs arranged on a patio.

4. Assembly Instructions

The SERWALL dining set features partially pre-assembled components and pre-drilled screw holes for straightforward assembly. All necessary tools are included.

4.1 Chair Assembly

  1. Attach the chair back to the seat frame using the provided hardware.
  2. Connect the side frames to the seat and back.
  3. Secure all connections with bolts and tighten firmly.
Chair assembly steps for SERWALL dining set

Image: Visual guide showing the four steps for assembling a dining chair, from individual parts to a complete chair.

4.2 Table Assembly

  1. Attach the table legs to the tabletop frame.
  2. Ensure the expandable mechanism is correctly aligned.
  3. Secure all connections with bolts and tighten firmly.
  4. Insert the umbrella hole cover if an umbrella is not being used.
Table assembly steps for SERWALL dining set

Image: Visual guide showing the four steps for assembling the dining table, from attaching legs to securing the top.

For a visual guide on table assembly, please refer to the video below:

Video: A detailed demonstration of how to assemble the SERWALL expandable outdoor dining table.

5. Operating Instructions

5.1 Extending the Dining Table

  1. Unlock: Locate and unlock both switches underneath the tabletop.
  2. Stretch: Gently pull the side panels of the table outwards.
  3. Flip: Flip the middle panel upwards to reveal the extension leaf.
  4. Close: Push the side panels inwards until they meet the extended middle panel.
  5. Lock: Lock both switches underneath the tabletop to secure the extended position.

5.2 Retracting the Dining Table

  1. Unlock: Locate and unlock both switches underneath the tabletop.
  2. Stretch: Gently pull the side panels of the table outwards.
  3. Flip: Flip the middle panel downwards to store the extension leaf.
  4. Close: Push the side panels inwards until they meet in the center.
  5. Lock: Lock both switches underneath the tabletop to secure the retracted position.
Instructions for extending and retracting the SERWALL dining table

Image: A step-by-step visual guide demonstrating how to extend and retract the SERWALL dining table.

6. Maintenance

The SERWALL dining set is designed for low maintenance and all-weather durability.

  • Cleaning: Simply rinse with soapy water or clean with a soft brush/sponge. The slatted design prevents water accumulation.
  • Hardware: All hardware is made from stainless steel to resist rust and corrosion. Periodically check and tighten any loose connections.
  • Storage: While designed for all-weather use, covering the set during extreme weather conditions or prolonged periods of non-use can extend its lifespan.
Easy cleaning of SERWALL dining table

Image: A close-up showing water beading on the HDPE tabletop, illustrating its low-maintenance and weather-resistant properties.

Watch the video below for a demonstration of the set's durability and ease of cleaning:

Video: A demonstration highlighting the weather resistance and easy cleaning features of the SERWALL HDPE dining set.

7. Troubleshooting

ProblemPossible CauseSolution
Table does not extend/retract smoothly.Switches not fully unlocked; debris in mechanism.Ensure both switches are fully unlocked. Clean any debris from the sliding mechanism.
Chairs feel wobbly.Loose bolts.Check and re-tighten all assembly bolts on the chairs.
Table feels unstable.Uneven surface; loose leg connections.Place the table on a level surface. Adjust the table's adjustable feet if present. Check and tighten all leg connections.
Water pooling on tabletop.Not applicable, slatted design prevents pooling.The slatted design is intended to prevent water accumulation. If pooling occurs, ensure the table is level.

8. Specifications

  • Model Number: SW-Expandable Dining-TSL-9-Grey-New
  • Color: Textilene Grey
  • Material: High Density Polyethylene (HDPE), Aluminum Frame, Textilene Fabric
  • Table Dimensions (Closed): 60.2" (L) x 34.4" (W) x 29.1" (H)
  • Table Dimensions (Expanded): 83.1" (L) x 34.4" (W) x 29.1" (H)
  • Chair Dimensions: 23.4" (W) x 22.6" (D) x 33.9" (H)
  • Table Weight Capacity: 220 lbs
  • Chair Weight Capacity: 330 lbs per chair
  • Umbrella Hole: 2-inch diameter
  • Hardware: Stainless Steel
Dimensions of SERWALL dining table and chair

Image: Detailed diagram showing the dimensions and weight capacities of the SERWALL dining table and chairs.

9. Warranty and Support

SERWALL offers a 1000-day policy on its furniture, ensuring free replacement parts in case of non-human damage or missing components.

Return Policy: This product is eligible for a 30-day return for refund or replacement.

For customer support or to inquire about replacement parts, please contact SERWALL directly. Refer to your purchase documentation for specific contact details.

You can also visit the official SERWALL store for more information: SERWALL Store

© 2026 SERWALL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.