Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Ant Esports 400 Air Mini Tower Gaming Cabinet. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage. This cabinet is designed to support Micro-ATX and Mini-ITX motherboards, offering a compact solution for gaming PC builds.
Safety Information
- Always disconnect the power supply from the wall outlet before installing or servicing any components inside the cabinet.
- Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
- Avoid placing the cabinet in areas with high humidity, extreme temperatures, or direct sunlight.
- Ensure proper ventilation around the cabinet to prevent overheating.
- Keep small parts and tools away from children.
- Do not attempt to modify the cabinet structure or components, as this may void your warranty and pose safety risks.
Package Contents
Verify that all items are present in your package:
- Ant Esports 400 Air Mini Tower Gaming Cabinet
- 3 x Pre-installed ARGB Fans (2 front, 1 rear)
- Accessory box with screws, standoffs, and cable ties
- User Manual (this document)
Setup and Installation
Follow these steps for assembling your PC components within the Ant Esports 400 Air Mini cabinet.
1. Prepare the Cabinet
Carefully remove the tempered glass side panel by unscrewing the thumb screws. Place the panel on a soft, flat surface to prevent scratches.
Image: Tempered Glass Side Panel. This image shows the cabinet with its clear tempered glass side panel, offering a view of the internal components.
2. Install the Motherboard
Install your Micro-ATX or Mini-ITX motherboard onto the pre-installed standoffs. Secure it with the appropriate screws from the accessory kit.
Image: Motherboard & Component Support. This diagram illustrates the compatible motherboard sizes (Mini-ITX and Micro-ATX) and the maximum VGA card length of 280mm.
3. Install the Power Supply Unit (PSU)
The Ant Esports 400 Air Mini supports ATX PSUs. Install the PSU in the designated front-mount location and secure it with screws.
4. Install Storage Drives
The cabinet supports 1 HDD and 2 SSDs. Mount your 3.5-inch HDD and 2.5-inch SSDs in the available drive bays and secure them.
Image: Storage & PSU Support. This image highlights the installation areas for SSDs, HDDs, and the ATX power supply unit.
5. Install Expansion Cards (GPU, etc.)
Install your graphics card (VGA card) and other expansion cards into the motherboard's PCIe slots. The cabinet supports VGA cards up to 280mm in length. Secure the cards with screws.
Image: 4 Expansion Slots. This rear view of the cabinet indicates the four available expansion slots for graphics cards and other add-in cards.
6. Connect Front Panel I/O Cables
Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power, Reset) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.
Image: I/O Panel. This image details the front input/output panel, showing the USB 3.0 port, Audio TRRS port, Reset button, and Power button.
7. Cable Management
Utilize the cable routing options behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics.
8. Reinstall Side Panel
Once all components are installed and cables are managed, carefully reattach the tempered glass side panel and secure it with the thumb screws.
Operating Instructions
Powering On
After connecting all necessary peripherals and the power cable to your PSU, press the Power Button on the front I/O panel to start your system.
ARGB Fan Operation
The Ant Esports 400 Air Mini comes with three pre-installed ARGB fans (two at the front, one at the rear) for immediate cooling and aesthetic lighting. These fans provide vibrant lighting effects. Please note that the RGB lighting on these pre-installed fans cannot be individually turned off or controlled via a dedicated button on the case itself. Control may be possible via motherboard software if your motherboard supports ARGB synchronization.
Image: Pre-Installed 3 ARGB Fans. This image shows the cabinet with its three pre-installed ARGB fans, highlighting their aesthetic and cooling function.
Fan Support and Airflow
The cabinet is designed for optimal airflow, supporting up to 7 x 120mm fans. This includes 2 x 120mm at the front, 2 x 120mm at the top, 2 x 120mm at the bottom, and 1 x 120mm at the rear.
Image: Fan Support. This diagram illustrates the various fan mounting locations and sizes supported by the cabinet for optimal airflow.
Maintenance
Dust Filter Cleaning
The Ant Esports 400 Air Mini features a magnetic dust filter on the top panel. Regularly remove and clean this filter to prevent dust buildup inside the cabinet, which can impede airflow and component cooling.
Image: Magnetic Dust Filter on Top. This image highlights the removable magnetic dust filter located on the top panel of the cabinet, designed to reduce dust accumulation.
General Cleaning
Use a soft, dry cloth to wipe down the exterior of the cabinet. For stubborn smudges on the tempered glass, a glass cleaner can be used sparingly on the cloth, not directly on the glass. Avoid abrasive cleaners or solvents.
Troubleshooting
If you encounter issues with your PC build, consider the following common troubleshooting steps:
- No Power: Ensure all power cables (PSU to wall, PSU to motherboard, CPU, GPU) are securely connected. Check the power switch on the PSU.
- Fans Not Spinning: Verify that all fan headers are correctly connected to the motherboard or fan controller. Check power connections to the PSU.
- No Display: Confirm that your monitor is connected to the graphics card (GPU) and not the motherboard's integrated graphics ports (unless you are using integrated graphics). Reseat the graphics card and RAM modules.
- Component Fitment Issues: Double-check the specifications for maximum component lengths (VGA card 280mm, CPU cooler 160mm) and motherboard compatibility (Micro-ATX, Mini-ITX).
- Front Panel I/O Not Working: Ensure the front panel cables are correctly connected to the motherboard headers.
For more specific component-related issues, refer to the respective component manuals (motherboard, GPU, PSU, etc.).
Specifications
Image: Ant Esports 400 Air Mini Computer Case. A general overview of the Ant Esports 400 Air Mini Tower Gaming Cabinet.
| Feature | Detail |
|---|---|
| Brand | Ant Esports |
| Model Name | 400 Air Mini |
| Case Type | Mini-Tower |
| Chassis Dimensions (L x W x H) | 320 x 192 x 391 mm (12.6D x 7.5W x 15.4H Centimeters) |
| Motherboard Compatibility | Micro ATX, Mini ITX |
| Materials | Acrylonitrile Butadiene Styrene (ABS), SPCC, Tempered Glass |
| Drive Bays | 1 x 3.5-inch HDD, 2 x 2.5-inch SSD |
| Fan Support (Maximum) | Front: 2 x 120mm Top: 2 x 120mm Bottom: 2 x 120mm Rear: 1 x 120mm |
| Pre-Installed Fans | 3 x ARGB Fans (2 Front, 1 Rear) |
| VGA Card Length (Maximum) | 280 mm |
| CPU Cooler Height (Maximum) | 160 mm |
| Power Supply Mounting Type | Front Mount (ATX PSU) |
| I/O Panel | 1 x USB 3.0, 1 x USB 2.0, 1 x HD Audio (TRRS Port), 1 x Reset Button, 1 x Power Button |
| Expansion Slots | 4 |
| Item Weight | 2.7 Kilograms |
| Special Features | RGB Lighting, Tempered Glass Side Panel, Magnetic Dust Filter |
Warranty Information
The Ant Esports 400 Air Mini Tower Gaming Cabinet comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation. Please retain your proof of purchase for warranty claims.
Support
For technical assistance, warranty claims, or product inquiries, please contact Ant Esports customer support. Refer to the official Ant Esports website for the most current contact information.
Manufacturer: Ant Esports
Importer Contact Information: Acro Engineering Company
