COLAMY ARLA Wooden Counter Height Bar Stools

1. Introduction

Thank you for choosing COLAMY ARLA Wooden Counter Height Bar Stools. These stools are designed to provide comfortable and stylish seating for your kitchen island, home bar, or dining area. Featuring a classic mid-century style with solid wood legs and upholstered seats, they blend seamlessly with various home decors. Please read this manual carefully before assembly and use to ensure proper installation and safe operation.

2. Safety Information

• Weight Capacity: Each stool is designed to support a maximum weight of 250 lbs (113 kg). Do not exceed this limit.
• Assembly: Ensure all screws and fasteners are securely tightened before using the stools. Periodically check and re-tighten fasteners as needed.
• Stability: Do not stand on the stools. Use them only for sitting.
• Children: Keep small parts and packaging materials away from children during assembly to prevent choking hazards.
• Placement: Place stools on a flat, stable surface to prevent tipping.

3. Package Contents

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Upholstered Seat (2x)
• Wooden Backrest (2x)
• Leg Assembly (2x)
• Hardware Pack (screws, washers, Allen wrench)
• Assembly Instructions Manual

4. Assembly Instructions

Assembly typically takes 10 to 15 minutes per stool. All necessary hardware and tools are included. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
2. Attach Backrest to Seat: Align the backrest with the pre-drilled holes on the seat. Secure using the provided screws and Allen wrench. Do not overtighten.
3. Attach Leg Assembly: Connect the leg assembly to the underside of the seat. Ensure the footrest is facing the correct direction. Secure with the appropriate screws and washers.
4. Final Tightening: Once all parts are loosely assembled, gently place the stool on a flat surface. Apply slight pressure to ensure all legs are even, then fully tighten all screws.
5. Repeat: Repeat the process for the second stool.

Figure 4.1: Detailed dimensions of the ARLA Bar Stool for reference during assembly.

5. Operating Instructions (Usage)

The COLAMY ARLA Bar Stools are designed for comfortable and stable seating. Their contoured upholstered seats and integrated backrests provide support for extended periods.

• Seating: Sit centrally on the seat for optimal balance and comfort.
• Footrest: Utilize the built-in footrest to reduce leg fatigue, especially during long periods of sitting.
• Placement: Position the stools appropriately under your counter or bar, ensuring adequate space for movement.

Figure 5.1: COLAMY ARLA Bar Stool in a kitchen island setting.

6. Maintenance and Care

Proper care will extend the life and appearance of your bar stools.

• Cleaning Wood Frame: Wipe the wooden frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Cleaning Upholstery: For spills, blot immediately with a clean, dry cloth. For general cleaning, use a mild fabric cleaner according to its instructions. Test on an inconspicuous area first.
• Fasteners: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading of upholstery and wood discoloration.

Figure 6.1: Key features for comfort and stability, including anti-slip protectors for floor protection.

7. Troubleshooting

8. Specifications

9. Warranty and Support

COLAMY provides customer support for its products. For any questions regarding assembly, missing parts, or product defects, please contact COLAMY customer service. Please retain your proof of purchase for warranty claims.