TINKSEN 68-inch Retractable Selfie Stick Tripod User Manual

Introduction

Thank you for choosing the TINKSEN 68-inch Retractable Selfie Stick Tripod. This versatile device is designed to enhance your mobile photography and videography experience, offering both a portable selfie stick and a stable tripod. Please read this manual carefully to ensure proper use and optimal performance.

Product Overview

The TINKSEN Selfie Stick Tripod combines a retractable monopod with a stable tripod base and a detachable wireless remote control. Key features include:

• Professional Height: Extends up to 68 inches (170 cm) for wide-angle shots and stable live streaming.
• Wireless Remote Control: Bluetooth-enabled remote for hands-free photo and video capture from up to 10 meters (393.7 inches) away.
• 360° Rotation & Stability: Features a 360-degree rotatable phone holder and a stable anti-shake triangular tripod design.
• Compact & Portable: Folds down to 11.6 inches (29.5 cm) and weighs approximately 1.01 pounds (0.46 kg) for easy transport.
• Universal Compatibility: Compatible with most iPhone and Android smartphones, including Samsung Galaxy devices, and mobile phones up to 12.9 inches in width.

Image: A woman uses the TINKSEN selfie stick tripod, extended to capture a wide-angle selfie in a grassy outdoor setting. The phone is securely mounted at the end of the extended stick.

Setup Instructions

1. Unfolding the Selfie Stick Tripod

1. Hold the handle firmly.
2. Gently pull the top section upwards to extend the telescopic rod.
3. To use as a tripod, spread the three legs at the base of the handle until they are fully extended and stable.

Image: Close-up view illustrating the robust triangular structure of the tripod base and the multi-section telescopic shaft, designed for stability and smooth extension.

2. Attaching Your Smartphone

1. Locate the phone holder at the top of the selfie stick.
2. Gently pull apart the spring-loaded clamps of the phone holder.
3. Carefully insert your smartphone between the clamps, ensuring it is securely held and balanced. The holder supports phones up to 12.9 inches.
4. Adjust the phone holder's angle by rotating it up to 360 degrees or flipping it 180 degrees for optimal viewing.

Image: This graphic demonstrates the flexibility of the phone holder, showing its ability to rotate 360 degrees and flip 180 degrees to achieve various shooting angles.

3. Pairing the Wireless Remote Control

1. The wireless remote control is typically located within the handle of the selfie stick. Gently slide it out.
2. Turn on the remote control (usually by pressing and holding the button until an indicator light flashes).
3. On your smartphone, go to Bluetooth settings and search for available devices.
4. Select the device named "AB Shutter3" or similar (refer to remote for exact name) to pair. The indicator light on the remote will stop flashing once paired.
5. Open your phone's camera app. The remote button will now act as a shutter button.

Image: A group of people posing for a photo, with a hand holding the detachable wireless remote control, illustrating its use for capturing group shots.

Operating Instructions

Using as a Selfie Stick

• Hold the handle firmly.
• Extend the telescopic rod to your desired length (up to 68 inches).
• Adjust the phone holder's angle for the best shot.
• Use the wireless remote to capture photos or start/stop video recording.

Using as a Tripod

• Ensure the tripod legs are fully extended and stable on a flat surface.
• Extend the telescopic rod to the desired height.
• Place your smartphone securely in the holder.
• Use the wireless remote for hands-free operation, ideal for group photos, time-lapses, or stable video recording.

Image: A woman demonstrates using the Bluetooth remote control while the selfie stick is set up as a tripod in a field, allowing for remote photo capture.

Maintenance

• Cleaning: Wipe the selfie stick tripod with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Storage: When not in use, fold the tripod legs and retract the telescopic rod completely. Store in a cool, dry place away from direct sunlight.
• Battery: The wireless remote uses a small button cell battery. Replace it when the remote's performance degrades. Ensure correct polarity when replacing.
• Avoid Overloading: Do not attach devices heavier than recommended to prevent damage to the phone holder or tripod.

Troubleshooting

Remote Control Not Pairing:

• Ensure the remote control is turned on and its battery is not depleted.
• Make sure Bluetooth is enabled on your smartphone.
• Try unpairing and re-pairing the remote control in your phone's Bluetooth settings.
• Ensure the remote is within the 10-meter operating range of your phone.

Selfie Stick/Tripod Instability:

• Ensure all telescopic sections are fully extended and locked into place (if applicable).
• When using as a tripod, ensure the legs are fully spread on a flat, stable surface.
• Verify your smartphone is securely and centrally mounted in the phone holder to maintain balance.

Phone Not Fitting in Holder:

• The holder supports devices up to 12.9 inches. Ensure your phone's dimensions are within this limit.
• Remove bulky phone cases if they prevent a secure fit.

Specifications

Image: A visual representation of the product's size at different extensions: folded (11.6 inches), partially extended (16.7 inches), and fully extended as a tripod (67 inches).

Warranty and Support

Warranty: The product information indicates that there is no specific warranty provided by the manufacturer for this item.

Support: For any questions, issues, or assistance with your TINKSEN Selfie Stick Tripod, please refer to the seller or the platform where the product was purchased. They can provide further support and guidance.