KOOPER TLL090

KOOPER Solar Lanterns Outdoor Waterproof

Model: TLL090

1. Introduction

This manual provides instructions for the KOOPER Solar Lanterns Outdoor Waterproof (Model TLL090). These lanterns are designed for outdoor decorative lighting, featuring solar charging, automatic operation, and a durable, waterproof construction. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your solar lanterns.

The package includes 4 solar lanterns and this user manual.

2. Setup

  1. Unpack: Carefully remove all lanterns and components from the packaging.
  2. Activate: Locate the ON/OFF switch, typically found on the underside of the solar panel. Slide the switch to the "ON" position.
  3. Remove Protective Film: Gently peel off any clear protective plastic film from the surface of the solar panel. This is crucial for efficient solar charging.
  4. Placement: Choose an outdoor location that receives 6-8 hours of direct, unobstructed sunlight daily. Ensure no shadows from trees, buildings, or other structures fall on the solar panel during the day.
  5. Installation: Use the integrated hook to hang the lanterns from a tree branch, shepherd's hook, or wall bracket. Alternatively, place them on a flat surface such as a table or step.
KOOPER Solar Lanterns charging during the day and illuminating at night

Image: Solar lanterns charging in sunlight and glowing at night. Shows 6-8 hours auto charging and 10-14 hours auto lighting.

KOOPER Solar Lanterns with dimensions and components

Image: A solar lantern with dimensions (9.1 inch height, 5.9 inch lantern height, 4.1 inch width) and close-ups of the high-efficiency solar panel, upgraded filament LED, and sturdy metal hook.

Video: A short demonstration of the KOOPER Solar Lanterns, highlighting their outdoor decorative use and IP65 waterproof rating.

3. Operation

  • Automatic Charging: Once the switch is in the "ON" position and the protective film is removed, the lanterns will automatically absorb sunlight and charge their internal battery during the day.
  • Automatic Illumination: A built-in light sensor detects ambient light levels. At dusk, when light levels are low, the lanterns will automatically turn on.
  • Lighting Duration: On a full charge (typically 6-8 hours of direct sunlight), the lanterns will provide 10-14 hours of continuous illumination.
  • Automatic Shut-off: At dawn, as light levels increase, the lanterns will automatically turn off and resume charging.
KOOPER Solar Lanterns illuminating an outdoor patio at night

Image: Two KOOPER solar lanterns providing warm light on an outdoor patio at night, creating an inviting atmosphere.

KOOPER Solar Lanterns in various outdoor settings

Image: Multiple KOOPER solar lanterns placed in different outdoor environments, including by a pool, on a porch, and near a mailbox, demonstrating versatile placement options.

4. Maintenance

  • Cleaning the Solar Panel: To ensure optimal charging efficiency, periodically wipe the solar panel surface with a soft, damp cloth to remove any accumulated dust, dirt, leaves, or snow. Avoid abrasive cleaners.
  • Clear Obstructions: Regularly check that no new foliage or objects are obstructing the solar panel's exposure to direct sunlight.
  • Weather Resistance: The lanterns are designed with an IP65 waterproof rating, making them resistant to rain, snow, wind, and heat. They do not require special protection during most weather conditions.
KOOPER Solar Lanterns with IP65 waterproof rating

Image: A KOOPER solar lantern hanging outdoors in the rain, illustrating its IP65 waterproof, frost-resistant, heat-resistant, and wind-resistant features.

5. Troubleshooting

  • Lanterns do not light up at night:
    • Ensure the ON/OFF switch is in the "ON" position.
    • Verify the solar panel is clean and free from any obstructions.
    • Confirm the lantern receives 6-8 hours of direct sunlight daily. Relocate if necessary.
    • Allow the lantern to charge for at least 2 full sunny days before expecting full performance, especially after initial setup or prolonged storage.
  • Lanterns light up for a short duration:
    • The solar panel may not be receiving enough direct sunlight for a full charge. Check placement and obstructions.
    • The battery may not be fully charged due to cloudy weather or insufficient sun exposure. Allow more charging time.
    • Extreme cold weather can reduce battery efficiency and overall lighting duration.

6. Specifications

FeatureDetail
BrandKOOPER
Model NumberTLL090
Power SourceSolar Powered
MaterialMetal
Finish TypePolished
Mounting TypeHanging
Water Resistance LevelIP65 Waterproof
Battery LifeUp to 14 Hours (on full charge)
Number of Light Sources4 (per pack)
Light Source Special FeaturesWarm Glow, Auto ON/OFF
Item Dimensions (L x W x H)4.1"L x 4.1"W x 15"H
KOOPER Solar Lanterns with upgraded high efficiency solar panel

Image: Close-up of the upgraded high-efficiency solar panel, highlighting its large charging area, 40%+ conversion rate, 2X charging speed, and 800mAh high-capacity battery.

KOOPER Solar Lanterns with upgraded premium tungsten filament bulb

Image: Detail of the upgraded premium tungsten filament bulb, showing its bright and soft filament light for a cozy ambiance and a lumen value graph indicating 12 hours of illumination.

7. Warranty and Support

The KOOPER Solar Lanterns come with a 90-day manufacturer's warranty. For warranty claims or technical support, please contact KOOPER customer service through your purchase platform or the contact information provided with your product packaging.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.