INJORA T6M Transmitter, T4DCM Receiver

INJORA T6M 2.4 GHz Transmitter and T4DCM 4-Channel Receiver User Manual

Model: T6M Transmitter, T4DCM Receiver

Brand: INJORA

Introduction

The INJORA T6M 2.4 GHz Transmitter and T4DCM 4-Channel Receiver system is designed for remote control vehicles, offering reliable performance and a compact design. This manual provides essential information for setup, operation, and maintenance of your radio control system.

  • Compact receiver design, suitable for 1/30, 1/24, 1/18 RC cars like SCX30, SCX24, and TRX4M.
  • 2.4 GHz spread spectrum technology with 67-channel pseudo-random frequency hopping (FHSS) for superior anti-interference performance.
  • Unique throttle speed limit adjustment allows beginners to practice safely at reduced speeds.
  • Transmitter voltage range: 4.8-12 V, with a 3-stage automatic voltage identification alarm. Low voltage alerts activate at 4.4 V, 7.4 V, and 10.8 V.
  • Audible power on/off alert, with an automatic alarm after 12 minutes of inactivity and automatic shutdown after 15 minutes without signal.
INJORA T6M 2.4GHz Radio System Transmitter and Receiver
The INJORA T6M 2.4GHz Radio System, featuring the T6M transmitter and T4DCM receiver, designed for precise control of RC vehicles.

Setup Instructions

Follow these steps to set up your INJORA T6M Transmitter and T4DCM Receiver:

  1. Remove the transmitter and receiver from their packaging.
  2. Insert 4 AA batteries into the transmitter. Ensure correct polarity. (Batteries are not included).
  3. Connect the receiver to your RC car's electronic speed controller (ESC) and other components as required.
  4. Turn on the transmitter first, then the receiver.
  5. Adjust the throttle speed limit on the transmitter if desired, especially for beginners.
  6. Confirm proper binding and functionality before operating your RC car.
Close-up of INJORA T6M Transmitter features: battery compartment, USB port, and control switches
Key features of the T6M transmitter, including the battery compartment for 4 AA batteries, a USB port, and adjustable control switches for fine-tuning settings.
INJORA T4DCM 4-channel receiver with connection wires
The compact INJORA T4DCM 4-channel receiver, shown with its connection wires, ready for installation in an RC vehicle.
Connecting the INJORA T4DCM receiver to an RC vehicle's electronic speed controller (ESC)
Illustration of the T4DCM receiver being connected to an RC vehicle's electronic speed controller (ESC) or other components, demonstrating the wiring process.

Operating Instructions

Once set up, operate your RC vehicle using the T6M transmitter. The system provides a control range of approximately 400-450 meters. The 2.4 GHz FHSS technology ensures stable and interference-free control.

  • Throttle Control: Use the trigger for forward and reverse movement. The adjustable throttle speed limit can be engaged for controlled learning.
  • Steering Control: Use the steering wheel for left and right turns.
  • Voltage Monitoring: The transmitter features a 3-stage automatic voltage identification alarm to alert you when battery levels are low (4.4 V, 7.4 V, and 10.8 V).
  • Automatic Safety Features: An audible alert signals power on/off. The transmitter will alarm automatically after 12 minutes of inactivity and shut down after 15 minutes without a signal to conserve battery life.
INJORA T6M Transmitter held in hand, showing ergonomic design
The INJORA T6M transmitter held comfortably in a user's hand, highlighting its ergonomic design for extended use.
INJORA T6M Transmitter compatible with RC Car, RC Boat, and RC Tank
The INJORA T6M transmitter, indicating its versatility and compatibility with various remote-controlled vehicles including cars, boats, and tanks.

Maintenance

To ensure the longevity and optimal performance of your INJORA T6M Transmitter and T4DCM Receiver, follow these maintenance guidelines:

  • Keep the transmitter and receiver clean and dry. Use a soft, dry cloth to wipe away dust and dirt.
  • Avoid exposure to extreme temperatures, direct sunlight, or moisture.
  • Regularly check the battery compartment for corrosion. If present, clean contacts with a cotton swab and rubbing alcohol.
  • When not in use for extended periods, remove the AA batteries from the transmitter to prevent leakage.
  • Store the system in a safe place, away from strong magnetic fields or static electricity.

Troubleshooting

If you encounter issues with your INJORA T6M Transmitter and T4DCM Receiver, consider the following common troubleshooting steps:

  • No Power: Ensure that 4 fresh AA batteries are correctly installed in the transmitter. Check the power switch on both the transmitter and receiver.
  • Loss of Control/Interference: Verify that the transmitter and receiver are within the specified operating range (400-450m). Ensure no other 2.4 GHz devices are causing interference nearby. Re-bind the transmitter and receiver if necessary (refer to binding instructions, typically involving a bind button on the receiver and a sequence on the transmitter).
  • Unresponsive Controls: Check all wiring connections between the receiver, ESC, and servos in your RC car. Ensure all components are securely plugged in.
  • Low Voltage Alarm: If the low voltage alarm sounds, replace the AA batteries in the transmitter immediately.

Specifications

Transmitter (T6M)

  • Part Number: T6M
  • Control Distance: Approx. 400-450 m
  • Voltage Input: 4 AA batteries (not included)
  • Net Weight: 175 g
  • Dimensions: 53 x 27 x 175 mm
  • Voltage Range: 4.8-12 V
  • Low Voltage Alerts: 4.4 V, 7.4 V, 10.8 V

Receiver (T4DCM)

  • Part Number: T4DCM
  • Frequency: 2.4 GHz
  • Channels: 4
  • Operating Voltage: 3-10 V
  • Gyro: None
  • Dimensions: 21.5 x 14.5 x 6.8 mm

General Product Details

  • Manufacturer Reference: INT-T6M-T4
  • ASIN: B0GFNB4PHW
  • Country of Origin: China
  • Material Type: Plastic
  • Power Source Type: Battery
  • Battery Type: 4 AA batteries (for transmitter)
  • Operation: Manual
  • Indoor/Outdoor Use: Outdoor
  • Assembly Required: No
  • Theme: RC Car Racing
  • Color: Black
Dimensions of INJORA T6M Transmitter and T4DCM Receiver
Detailed dimensions of the T6M transmitter and the compact T4DCM receiver.

Warranty Information

For specific warranty details, please refer to the retailer's return policy or contact INJORA customer support directly. Typically, electronic products come with a limited manufacturer's warranty against defects in materials and workmanship for a specified period from the date of purchase. Keep your purchase receipt as proof of purchase.

Customer Support

For technical assistance, product inquiries, or further support, please visit the official INJORA website or contact their customer service department. When contacting support, please have your product model number (INT-T6M-T4) and purchase details readily available.

INJORA Official Website: Visit INJORA Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.