iphoenix IP570 Portable Bluetooth Speaker User Manual

Introduction

Thank you for choosing the iphoenix IP570 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use to ensure optimal performance and longevity of your device.

Product Overview

Package Contents

• iphoenix IP570 Portable Bluetooth Speaker
• USB-C Charging Cable
• User Manual

Speaker Layout

Familiarize yourself with the buttons and ports on your IP570 speaker:

Top Panel Buttons:

• Power Button: Long press to power on/off. Short press to play/pause in music mode, or answer/end calls.
• Volume Down / Previous Track Button: Short press to decrease volume. Long press to go to the previous track.
• Volume Up / Next Track Button: Short press to increase volume. Long press to go to the next track.
• Mode Button: Short press to switch between Bluetooth, TF Card, USB, AUX, and FM Radio modes.
• Light Button: Short press to cycle through RGB light modes or turn lights off.

Side Panel Ports:

• USB Port: For USB drive playback.
• TF Card Slot: For TF (MicroSD) card playback.
• AUX Input: For connecting external audio devices via a 3.5mm audio cable.
• Type-C Charging Port: For charging the speaker.

Setup

Charging the Speaker

Before first use, fully charge the speaker. Connect the provided USB-C charging cable to the speaker's Type-C port and the other end to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off once fully charged. A full charge provides up to 25 hours of playtime.

Powering On/Off

• To Power On: Long press the Power button until you hear an audible prompt and the indicator light turns on.
• To Power Off: Long press the Power button again until you hear an audible prompt and the indicator light turns off.

Bluetooth Pairing

The speaker will automatically enter Bluetooth pairing mode when powered on for the first time or if no device is connected. The Bluetooth indicator light will flash.

1. Ensure the speaker is powered on and in Bluetooth pairing mode.
2. On your mobile device, enable Bluetooth and search for available devices.
3. Select "IP570" from the list of devices.
4. Once connected, the Bluetooth indicator light will remain solid, and you will hear a confirmation tone.

The speaker will automatically attempt to reconnect to the last paired device when powered on.

Operation

Music Playback Modes

Press the Mode Button to cycle through available playback modes:

• Bluetooth Mode: Connect your device via Bluetooth as described in the Setup section.
• TF Card Mode: Insert a TF (MicroSD) card with audio files into the TF card slot. The speaker will automatically switch to TF card mode and begin playback.
• USB Drive Mode: Insert a USB drive with audio files into the USB port. The speaker will automatically switch to USB mode and begin playback.
• AUX Mode: Connect an external audio device using a 3.5mm audio cable to the AUX input. Switch to AUX mode using the Mode button.
• FM Radio Mode: Switch to FM Radio mode using the Mode button. Short press the Power button to auto-scan and save available stations. Use the Volume Up/Down buttons to navigate between saved stations.

True Wireless Stereo (TWS) Pairing

Connect two IP570 speakers for a true stereo sound experience.

Image shows two iphoenix IP570 speakers, illustrating their ability to connect wirelessly for a stereo sound experience.

1. Ensure both IP570 speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the primary speaker), long press the Mode Button (or a dedicated TWS button if present, refer to product diagram) until you hear a pairing tone.
3. The two speakers will automatically connect to each other. Once paired, you will hear a confirmation tone.
4. Now, connect your mobile device to the primary speaker via Bluetooth as described in the Bluetooth Pairing section.

Dynamic RGB Lights

The speaker features dynamic RGB lighting that can enhance your listening experience.

Image shows the iphoenix IP570 speaker with its front panel illuminated by colorful RGB lights, demonstrating the dynamic lighting feature.

Short press the Light Button to cycle through various RGB light modes, including breathing effects and rhythm control that pulses to the beat of your music. Press the button repeatedly to turn the lights off.

Call Function

With the built-in microphone, you can answer calls directly through the speaker when connected via Bluetooth.

• Answer/End Call: Short press the Power Button.
• Reject Call: Long press the Power Button.

Maintenance

Cleaning

To clean the speaker, use a soft, damp cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface or internal components. Ensure all ports are dry before charging or using the speaker after cleaning, especially given its IPX6 water resistance.

Storage

Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery to approximately 50% every three months to maintain battery health.

Troubleshooting

Specifications

Image shows the iphoenix IP570 speaker with its dimensions labeled: 2.2 inches (Length), 4.7 inches (Width), and 3.5 inches (Height).

Warranty and Support

iphoenix is committed to your complete satisfaction. We offer comprehensive around-the-clock customer support and back our products with a 90-day money-back guarantee. For any questions, concerns, or technical assistance, please refer to the contact information provided with your purchase or visit the official iphoenix website.