1. Introduction
Thank you for choosing the FLEXISPOT S2E-PRO Split King Adjustable Bed Base. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new adjustable bed base. Please read these instructions thoroughly before use and retain them for future reference.
Image: The FLEXISPOT S2E-PRO Split King Adjustable Bed Base, shown with a mattress.
2. Safety Information
Your FLEXISPOT S2E-PRO Adjustable Bed Base is designed with safety in mind and is UL, FCC, and CE certified. Adhere to the following guidelines to ensure safe operation:
- Weight Capacity: Do not exceed the maximum weight capacity of 750 lbs (including mattress and occupants).
- Clearance: Ensure there is adequate clearance around the bed base during operation to prevent obstruction or injury. Keep children and pets away from moving parts.
- Child Safety Lock: Utilize the built-in child safety lock feature to prevent unintended operation by children.
- Emergency Lowering: In case of a power outage, use the backup battery strap for emergency lowering of the bed base to a flat position.
- Electrical Safety: Do not open or tamper with the control box or motors. Only use the provided power cord and ensure it is not pinched or damaged.
3. Package Contents
Before assembly, verify that all components are present. If any parts are missing or damaged, contact FLEXISPOT customer support.
- Adjustable Bed Frame (Split King sections)
- Wireless Remote Control (batteries not included)
- Power Cord and Adapter
- Legs (6 for each Split King section)
- Mattress Retainer Bar
- User Manual
4. Assembly Instructions
Assembly of the FLEXISPOT S2E-PRO bed base is straightforward, though having two people is recommended for handling the frame sections. Ensure you have enough space to work.
- Unpack Components: Carefully remove all items from the packaging. Place the bed frame sections upside down on a clean, flat surface.
- Attach Legs: Screw the provided legs into the designated threaded holes on the underside of each bed frame section. Tighten securely by hand.
- Connect Power: Connect the power cord to the control box on the bed frame and then plug it into a grounded electrical outlet.
- Install Mattress Retainer Bar: Insert the mattress retainer bar into the holes at the foot of the bed frame. This prevents the mattress from shifting during adjustments.
- Position Bed Base: Carefully flip the bed base over and place it in your desired location.
- Insert Remote Batteries: Open the battery compartment on the wireless remote and insert the required batteries (typically AAA, not included).
After assembly, test all functions of the bed base using the remote control to ensure proper operation.
5. Operating Instructions
The FLEXISPOT S2E-PRO features a user-friendly wireless remote for effortless control of your bed base.
Wireless Remote Functions
Image: Diagram of the wireless remote control with labeled buttons.
- Flat Position: Press to return the bed base to a completely flat position.
- Zero Gravity Position (ZG): Activates the pre-programmed Zero Gravity position, elevating your legs slightly above your heart for a weightless sensation.
- Head UP/DOWN: Adjusts the head section of the bed base upwards or downwards.
- Foot UP/DOWN: Adjusts the foot section of the bed base upwards or downwards.
- Custom Memory Position 1 & 2: Save and recall your two favorite custom positions.
- Flashlight: Activates a small light on the remote for convenience in the dark.
Saving Custom Memory Positions
- Adjust the head and foot sections to your desired position using the UP/DOWN buttons.
- Press and hold either the Custom Memory Position 1 or Custom Memory Position 2 button until the remote light flashes or the bed base briefly moves, indicating the position is saved.
- To recall a saved position, simply press the corresponding memory button.
6. Features and Benefits
The FLEXISPOT S2E-PRO Adjustable Bed Base offers a range of features designed to enhance your comfort and well-being.
Independent Head and Foot Lift
Image: A woman comfortably positioned in an adjustable bed, demonstrating independent head and foot elevation. The head section is elevated to 60 degrees and the foot section to 45 degrees.
Customize your comfort with independent head (up to 60°) and foot (up to 45°) elevation. This allows you to find the perfect angle for sleeping, reading, watching TV, or alleviating pressure on your back and legs.
Zero Gravity Position
Image: A woman relaxing in the Zero Gravity position on an adjustable bed, with her head and legs slightly elevated to create a weightless sensation.
The pre-programmed Zero Gravity setting gently elevates your legs above your heart, promoting a balanced, weightless sensation. This position can help ease pressure on your body, improve circulation, and reduce snoring.
Whisper-Quiet Motor
Experience smooth and quiet adjustments with the durable motor, ensuring minimal disturbance during position changes.
Mattress Compatibility
Image: An adjustable bed base with a mattress, illustrating compatibility with Memory Foam, Latex, Gel, and Hybrid mattress types.
The S2E-PRO is compatible with most mattress types, including memory foam, latex, gel, and hybrid mattresses.
7. Maintenance
To ensure the longevity and optimal performance of your FLEXISPOT S2E-PRO Adjustable Bed Base, follow these maintenance guidelines:
- Cleaning: Wipe the bed frame with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Regular Checks: Periodically inspect all connections and fasteners to ensure they are secure.
- Motor Care: The motors are designed for maintenance-free operation. Do not attempt to lubricate or open them.
8. Troubleshooting
If you encounter issues with your adjustable bed base, refer to the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed does not operate | No power, loose connection, remote batteries dead/missing. | Check if the power cord is securely plugged into the outlet and the control box. Ensure the outlet is functional. Replace remote batteries. |
| Remote flashes but bed does not move | Remote not paired, signal interference. | Refer to the remote pairing instructions (usually found in a separate remote guide or on the control box). Ensure no objects are blocking the signal. |
| Grinding or unusual noise | Obstruction, loose fasteners. | Check for any objects under or around the bed base. Tighten any loose bolts or screws. |
If the issue persists after attempting these solutions, please contact FLEXISPOT customer support for further assistance.
9. Specifications
- Model: S2E-PRO
- Size: Split King
- Dimensions (L x W x H): 78.74" x 76" x 14.41"
- Maximum Weight Capacity: 750 lbs
- Head Incline: Up to 60°
- Foot Incline: Up to 45°
- Frame Material: Alloy Steel
- Certifications: UL, FCC, CE
- Included Components: Adjustable Bed Frame, Wireless Remote, Power Cord, Legs, Mattress Retainer Bar
10. Warranty and Support
FLEXISPOT stands behind the quality of its products. The S2E-PRO Adjustable Bed Base comes with the following warranties:
- Motor Warranty: 5 years
- Frame Warranty: 10 years
For warranty claims, technical support, or any questions regarding your product, please contact FLEXISPOT customer service through their official website or the contact information provided with your purchase documentation. Please have your model number (S2E-PRO) and proof of purchase ready when contacting support.