Introduction
Thank you for choosing the Home Centre Clair 6-Seater Dining Table Set. This manual provides essential information for the assembly, safe use, care, and maintenance of your new dining furniture. Please read these instructions carefully before assembly and retain them for future reference.
What's in the Box
Before beginning assembly, please ensure all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- 1 x Dining Table (Round faux marble top, engineered wood legs with PVC leatherette)
- 6 x Dining Chairs (High-performance fabric, high-gauge mild steel frame)
- Assembly Hardware (screws, bolts, tools if included)
Assembly Instructions
Assembly is required for this dining set. It is recommended that two adults perform the assembly. Clear a spacious area and lay out all components on a soft, clean surface to prevent scratches.
- Unpack Components: Carefully remove all parts from the packaging. Verify against the "What's in the Box" list.
- Assemble Dining Table Base: Attach the engineered wood legs to the table base structure using the provided hardware. Ensure all connections are secure but do not overtighten initially.
- Attach Table Top: Carefully place the faux marble table top onto the assembled base. Align the pre-drilled holes and secure the top using the designated screws.
- Assemble Dining Chairs: For each chair, attach the seat and backrest to the mild steel frame using the provided hardware. Ensure all bolts are tightened evenly.
- Final Tightening: Once all components are assembled, go back and gently tighten all screws and bolts on both the table and chairs. Avoid overtightening to prevent damage.
- Placement: Position the dining set on a level surface.
Image 1: Assembled Home Centre Clair Dining Table Set.
Image 2: Dining table dimensions (135 cm L x 135 cm W x 76 cm H) with a human for scale.
Usage and Operation
The Home Centre Clair Dining Table Set is designed for indoor use in dining areas.
- Weight Distribution: Distribute weight evenly across the table surface. Avoid placing heavy objects on one side.
- Chair Use: Use chairs for seating only. Avoid standing on chairs or using them as step stools.
- Hot Items: Always use placemats or coasters under hot dishes to protect the faux marble surface.
- Sharp Objects: Avoid dragging sharp objects across the table surface to prevent scratches.
Image 3: Detail of the dining table's faux marble top and conical base.
Care and Maintenance
Proper care will extend the life and appearance of your dining set.
- Table Top (Faux Marble):
- Wipe spills immediately with a soft, damp cloth.
- Use mild soap and water for cleaning; avoid harsh chemicals or abrasive cleaners.
- Do not place extremely hot or cold items directly on the surface without protection.
- Table Legs (PVC Leatherette):
- Wipe clean with a soft, damp cloth.
- Avoid direct sunlight exposure to prevent fading or cracking.
- Chairs (High-Performance Fabric):
- Vacuum regularly to remove dust and debris.
- Spot clean with a mild fabric cleaner as needed, testing on an inconspicuous area first.
- Avoid excessive moisture.
- General Care:
- Periodically check and tighten all screws and bolts to ensure stability.
- Keep furniture away from direct heat sources and excessive humidity.
- Avoid dragging furniture; lift it when moving to prevent damage to legs and flooring.
Image 4: Detail of the faux marble table top and rotating center.
Image 5: Close-up of the rotating mechanism on the table.
Troubleshooting
This section addresses common issues you might encounter with your dining set.
- Wobbly Table/Chairs:
- Ensure all bolts and screws are securely tightened.
- Check if the furniture is on a level surface. Adjust floor glides if present, or use shims if necessary.
- Scratches on Table Top:
- Minor scratches on faux marble may be reduced with specialized repair kits (consult a professional). Prevention is key; always use placemats and coasters.
- Fabric Stains:
- Address stains immediately. Blot, do not rub. Use a mild fabric cleaner according to product instructions.
Image 6: Detail of the conical table legs with PVC leatherette finish.
Specifications
| Brand | Home Centre |
| Model Number | Clair |
| Set Name | Table With 6 Chairs |
| Colour | Beige |
| Table Dimensions (L x W x H) | 135 cm x 135 cm x 76 cm |
| Chair Dimensions (L x W x H) | 62 cm x 54 cm x 91 cm |
| Item Weight | 45000 Grams (Table and Chairs combined) |
| Table Top Material | Faux Marble |
| Table Leg Material | Engineered Wood wrapped in PVC Leatherette |
| Chair Upholstery Material | High-Performance Fabric |
| Chair Frame Material | High-Gauge Mild Steel |
| Assembly Required | Yes |
Image 7: Overhead view of the dining table.
Warranty Information
The Home Centre Clair 6-Seater Dining Table Set comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal household use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, assistance with assembly, or warranty claims, please contact Home Centre customer support.
- Manufacturer: Lifestyle Int Pvt Ltd
- Manufacturer Address: 77 Degree Town Centre, Building No.3, West Wing, Off-HAL Airport Road, Yamlur, Bangalore-560037
- Online Support: Refer to the Home Centre official website or your retailer's support page.