Introduction
Thank you for choosing KOOPER Solar Fence Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new solar lights. These lights are designed to provide bright, versatile illumination for your outdoor spaces, featuring multiple color modes and automatic operation.
Setup and Installation
The KOOPER Solar Fence Lights feature an easy-to-install lock-wallplate system. Follow these steps for optimal placement and secure mounting:
- Choose Location: Select a location that receives 4-6 hours of direct sunlight daily for optimal charging. Avoid shaded areas.
- Mark Drill Points: Use the lock wall plate as a template to mark the desired drill points on your fence, wall, or railing.
- Drill Holes: Drill holes at the marked points.
- Insert Expansion Plugs: Gently tap the included expansion plugs into the drilled holes with a hammer until flush with the surface.
- Secure Wall Plate: Align the lock wall plate with the expansion plugs and tighten the screws to secure it firmly.
- Attach Light: Snap the solar light onto the secured lock wall plate. Ensure it clicks into place for a firm attachment.
The lights are designed for outdoor use and are IP65 waterproof, making them suitable for various weather conditions.
Operating Instructions
Your KOOPER Solar Fence Lights are equipped with intelligent sensors for automatic operation and offer multiple lighting modes.
Automatic On/Off Function
The lights feature a dusk-to-dawn sensor. They will automatically charge during the day and illuminate at night. No manual switching is required for daily operation.
Lighting Modes
The lights offer 10 distinct lighting modes, including 9 fixed colors and an RGB color-changing mode. To cycle through the modes, locate the touch switch on the light unit and press it to select your desired color or effect.
- 9 Fixed Color Modes: Cool White, Warm Light, Neutral Light, Green, Blue, Red, Cyan, Yellow, Purple.
- 1 RGB Color Gradient Mode: A mesmerizing fade effect that cycles through various colors.
Video Demonstration
Maintenance
KOOPER Solar Fence Lights are designed for minimal maintenance. To ensure optimal performance:
- Clean Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient sunlight absorption and charging.
- Check Placement: Ensure the lights remain in a location that receives adequate direct sunlight. Trim any new foliage that might obstruct sunlight.
- Weather Resistance: The lights are IP65 waterproof and built with durable ABS+PC material, designed to withstand various weather conditions. No special weather-proofing is typically required.
Troubleshooting
If your solar fence lights are not performing as expected, consider the following:
- Light Not Turning On at Night:
- Ensure the solar panel is clean and free from obstructions.
- Verify the light is placed in an area receiving 4-6 hours of direct sunlight daily.
- Check if the ambient light sensor is not being triggered by other light sources (e.g., streetlights, porch lights).
- Short Illumination Time:
- Insufficient charging due to cloudy weather or shaded placement. Relocate if necessary.
- Ensure the solar panel is clean.
- Inconsistent Color or Mode Changes:
- Ensure the touch switch is functioning correctly. Try pressing it multiple times.
- Allow the light to fully charge for a day before re-testing.
For further assistance, please refer to the support section.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | KOOPER |
| Model Number | TDL023 |
| Color | Black |
| Material | Acrylonitrile Butadiene Styrene (ABS+PC) |
| Light Source | LED with Ultra-bright Convex Optical Lenses |
| Lighting Modes | 9 Fixed Colors & RGB Color Changing Modes (10 modes total) |
| Power Source | Solar Powered |
| Solar Conversion Rate | 40% |
| Charging Time | 4-6 hours (direct sunlight) |
| Lighting Time | Up to 12-15 hours (fully charged) |
| Water Resistance Level | IP65 Waterproof |
| Control Method | Touch Switch, Automatic Dusk-to-Dawn Sensor |
| Dimensions (L x W x H) | 2.84"L x 2.7"W x 2.1"H |
| Included Components | Solar Fence Lights, Instruction Manual |
Warranty Information
KOOPER Solar Fence Lights come with a 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and claims, please contact KOOPER customer support.
Customer Support
If you have any questions, require technical assistance, or need to make a warranty claim, please contact KOOPER customer support. You can typically find contact information on the official KOOPER website or through the retailer where you purchased the product.
For more information and product updates, visit the KOOPER Store on Amazon.
