Introduction
Thank you for choosing the TFCFL Electric Baby Crib Cradle. This manual provides essential information for the safe assembly, operation, and maintenance of your new baby cradle. Please read it thoroughly before use and keep it for future reference.
Important Safety Information
WARNING: Failure to follow these safety instructions could result in serious injury or death.
- Always place the cradle on a stable, level surface, free from slopes.
- Assembly must be performed by an adult.
- Do not use the product if it is damaged. Regularly inspect all parts for damage during assembly and disassembly. Do not discard small parts.
- Ensure the support bracket is fully extended and the belt at the bottom of the cradle is securely fixed. Verify there is sufficient space for swinging without obstruction.
- For infants younger than 3 months, introduce the rocking function gradually. Do not immediately turn on the motor if the baby is not adapting well; allow them to adjust slowly.
- The motor operates with gears, which may produce a slight clock-like sound during rocking. This is normal.
- Adjust the swing speed according to the child's weight. Gears 1-3 are suitable for sleep mode, while gears 4-5 are for play mode and may produce more sound.
- Never leave children unattended in the swing. Adult supervision is always required.
- Do not attach additional ropes or heavy objects to the swing, as this can create a falling hazard.
- Keep the product away from fire sources.
Package Contents
Please check that all items are present and in good condition:
- Baby Cradle Swing Frame
- Cradle Basket
- Controller (Remote)
- USB Cable
- English Manual
- Mattress
- Pillow
- Mosquito Net
- Toy Bar with Hanging Toys
Image: All components included in the package.
Setup and Assembly
Follow these steps to assemble your TFCFL Electric Baby Crib Cradle:
- Assemble the Frame: Connect the steel pipe sections to form the main support frame. Ensure all connections are secure and the frame is fully extended.
- Install the Cradle Basket: Carefully place the cradle basket onto the assembled frame. Ensure it is properly seated and secured by the bottom belt.
- Insert Mattress and Pillow: Place the mattress and pillow inside the cradle basket for comfort.
- Attach the Toy Bar: Secure the toy bar to the designated points on the frame. Ensure the hanging toys are firmly attached.
- Install the Mosquito Net: Attach the mosquito net over the cradle basket to protect your baby.
- Connect Power: Plug the USB cable into the control unit and a suitable power source.
Image: Detail of frame connection points.
Image: Cradle interior with safety belt.
Image: Toy bar with hanging toys.
Video: This video demonstrates the assembly process of the TFCFL Electric Baby Crib Cradle, including frame setup, cradle installation, and attaching accessories. It also shows the product in operation.
Operating Instructions
The TFCFL Electric Baby Crib Cradle features a control panel and a remote control for easy operation.
Control Panel Functions
Image: Control panel on the cradle.
- Power Button: Press to turn the cradle on/off.
- Swing Speed Adjustment: Press the swing speed button to cycle through 5 different rocking speeds (1-5).
- Timer Function: Press the timer button to set the automatic shutdown time to 8, 15, 30, or 60 minutes.
- Music Playback: Press the music button to play built-in melodies. The cradle has 12 pre-installed songs.
- USB Port: Insert a USB disk (not included) to play your own MP3 music.
Remote Control Functions
Image: Remote control for the cradle.
The remote control mirrors the functions of the main control panel, allowing convenient operation from a distance of up to 5 meters (16.4 feet).
Maintenance
- Cleaning: The fabric components of the cradle should be hand washed only. Do not machine wash or tumble dry.
- Frame Care: Wipe the steel frame with a damp cloth and mild soap. Dry thoroughly.
- Storage: When not in use, store the cradle in a clean, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
- Baby Cries When Placed in Cradle: This is normal for some infants, especially those under 3 months. Do not force the baby into the cradle. Pick them up, comfort them, and try again later, allowing them to adapt gradually.
- Cradle Makes a Sound During Rocking: The gear-driven motor may produce a slight clock-like sound. This is part of normal operation and not a defect.
- Cradle Not Swinging: Ensure the power cable is securely connected and the power button is pressed. Check that the cradle is not obstructed and has enough space to swing freely.
- Remote Control Not Working: Check the battery in the remote control. Ensure there are no obstructions between the remote and the cradle's receiver.
Specifications
| Feature | Specification |
|---|---|
| Model | OT-WMT-446-279-JNLA1 |
| Color | Blue |
| Material | ABS, Steel, Peach Skin Velvet, Plastic, Nylon |
| Mounting Type | Free-standing |
| Timing Function | 8, 15, 30, 60 minutes |
| Swing Speed | 5 adjustable gears |
| Controller Distance | Up to 5m (16.4ft) |
| Applicable Age | 0-18 Months |
| Load-bearing Capacity | Up to 25kg (55 lbs) |
| Mattress Thickness | 2cm (0.78inch) |
| Cradle Inner Size | 90 x 52 x 30 cm (35.5 x 20.5 x 11.8 inches) |
| Product Size | 100 x 75 x 86 cm (39.4 x 29.5 x 33.9 inches) |
| Net Weight | 6kg (13.22 lbs) |
| Music Features | Built-in 12 melodies, MP3 playback via USB (USB disk not included) |
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.
